带多个充液储箱航天器的耦合动力学建模方法

研究了充液航天器储箱内液体晃动与全星姿态运动的耦合动力学建模方法．分别基于单摆等效力学模型和质心面等效力学模型建立了全星姿态耦合动力学方程,并分别针对2个储箱串联布局、3个储箱并联布局的充液航天器在不同工况下的液体晃动问题进行了数值仿真研究;同时比较分析了两种储箱布局方案下液体晃动对航天器姿态运动的影响,为工程应用提供参考．     

Computational aerodynamic analysis on perimeter reinforced （PR）-compliant wing

Abstract Implementing the morphing technique on a micro air vehicle （MAV） wing is a very chal- lenging task, due to the MAWs wing size limitation and the complex morphing mechanism. As a result, understanding aerodynamic characteristics and flow configurations, subject to wing structure deformation of a morphing wing MAV has remained obstructed. Thus, this paper presents the investigation of structural deformation, aerodynamics performance and flow formation on a pro- posed twist morphing MAV wing design named perimeter reinforced （PR）-compliant wing. The numerical simulation of two-way fluid structure interaction （FSI） investigation consist of a quasi- static aeroelastic structural analysis coupled with 3D incompressible Reynolds-averaged Navier- Stokes and shear-stress-transport （RANS-SST） solver utilized throughout this study. Verification of numerical method on a rigid rectangular wing achieves a good correlation with available exper- imental results. A comparative aeroelastic study between PR-compliant to PR and rigid wing per- formance is organized to elucidate the morphing wing performances. Structural deformation results show that PR-compliant wing is able to alter the wing＇s geometric twist characteristic, which has directly influenced both the overall aerodynamic performance and flow structure behavior. Despite the superior lift performance result, PR-compliant wing also suffers from massive drag penalty, which has consequently affected the wing efficiency in general. Based on vortices investigation, the results reveal the connection between these aerodynamic performances with vortices formation on PR-comoliant wing.     

运载器末助推段非线性姿态控制器设计

根据单摆模型近似晃动质量推导晃动运动与姿态运动的动力学方程,基于状态相关黎卡提方程方法,综合动态逆控制方法设计了运载器末助推段非线性姿态控制器,由状态反馈实现姿态跟踪和晃动抑制。因实际中模拟晃动运动的单摆状态无法测量,引入输出多采样率技术,通过在一个采样周期内多次检测被控对象的输出估计状态,实现设计的状态反馈控制律。数...     

导风轮轮罩引气对离心式压气机性能影响的数值研究

为了研究扩大离心压气机喘振裕度的实用技术 ,以解决某工程设计中的问题 ,用三维粘性计算流体力学 ( CFD)计算软件对离心压气机导风轮轮罩引气措施进行了数值模拟。该项技术在应用中所涉及的设计参数经过了初步的数值试验。从数值模拟的结果中 ,可以看到该项技术对离心压气机性能改进的明显效果      

圆柱状含液体介质的空间辐射器的传热效率

给出了求解典型圆柱状态含液体介质的空间辐射器传热效率的解析计算公式,降低了辐射器传热效率计算的复杂度,通过与数值计算结果的比对分析,认为用流体入口温度代替辐射器平均温度的假设在工程上是能够接受的,其引起的偏差小于5%。     

Recent active thermal management technologies for the development of energy-optimized aerospace vehicles in China

Recently, the development of modern vehicles has brought about aggressive integration and miniaturization of on-board electrical and electronic devices. It will lead to exponential growth in both the overall waste heat and heat flux to be dissipated to maintain the devices within a safe temperature range. However, both the total heat sinks aboard and the cooling capacity of currently utilized thermal control strategy are severely limited, which threatens the lifetime of the on-board equipment and even the entire flight system and shrink the vehicle’s flight time and range. Facing these thermal challenges, the USA proposed the program of “INVENT” to maximize utilities of the available heat sinks and enhance the cooling ability of thermal control strategies. Following the efforts done by the USA researchers, scientists in China fought their ways to develop thermal management technologies for Chinese advanced energy-optimized airplanes and spacecraft. This paper elaborates the available on-board heat sinks and aerospace thermal management systems using both active and passive technologies not confined to the technology in China. Subsequently, active thermal management technologies in China including fuel thermal management system, environment control system, non-fuel liquid cooling strategy are reviewed. At last, space thermal control technologies used in Chinese Space Station and Chang’e-3 and to be used in Chang’e-5 are introduced. Key issues to be solved are also identified, which could facilitate the development of aerospace thermal control techniques across the world.     

Effect of scavenge port angles on flow distribution and performance of swirl-loop scavenging in 2-stroke aircraft diesel engine

Swirl-Loop Scavenging (SLS) improves the performance of 2-stroke aircraft diesel engine because the involved swirl may not only benefit the scavenging process, but also facilitate the fuel atomization and combustion. The arrangement of scavenge port angles greatly influences in-cylinder flow distribution and swirl intensity, as well as the performance of the SLS engine. However, the mechanism of the effect and visualization experiment are rarely mentioned in the literature. To further investigate the SLS, Particle Image Velocimetry (PIV) experiment and Computational Fluid Dynamics (CFD) simulation are adopted to obtain its swirl distribution characteristics, and the effect of port angles on scavenging performance is discussed based on engine fired cycle simulation. The results illustrate that Reynolds Stress Turbulence model is accurate enough for in-cylinder flow simulation. Tangential and axial velocity distribution of the flow, as well as the scavenging performance, are mainly determined by geometric scavenge port angles α_geom and β_geom. For reinforcement of scavenging on cross-sections and meridian planes, α_geom value of 27° and β_geom value of 60° are preferred, under which the scavenging efficiency reaches as high as 73.7%. Excessive swirl intensity has a negative effect on SLS performance, which should be controlled to a proper extent.     

大型充液卫星贮箱‘正反装’情况下的特性研究

本文详细地描述了带有中心承力式双元大贮箱的大型充液卫星的液体晃动摆与卫星耦合的动力学模型;用传递函数零极点法定性地分析了控制系统的稳定性,按照实际工程设计方法考虑了晃动模型参数允差,具体地比较了贮箱‘正反装’情况下控制系统最坏允差组合时的稳定裕度和动态性能,研究了贮箱‘正反装’情况下的星箭匹配问题。研究结果表明,在控制系统稳定性方面,‘正装’、‘反装’不相上下,在星箭匹配和控制系统动态性能方面,‘正装’优于‘反装’,从而证明了选择‘正装’的合理性和必要性。     

斜切喷管性能计算

介绍了一种斜切喷管流场计算的新方法,即采用轴对称无粘流动模型,喷管喉部区域用Kliegel提出的小参数法求解,超音速段用MacCormack二步显格式空间步进求解。在流场计算的基础上,进行了斜切喷管的性能计算。     

表面张力贮箱推进剂管理装置流阻的计算

为了在设计卫星用表面张力贮箱时，正确地计算出推进剂管理装置中液体推进剂的流阻，根据液体的流动特性，研究了卫星用表面张力贮箱推进剂管理装置中推进剂在管道，筛网和一些局部流阻的计算方法，给出了各部分流阻的计算公式，据此实际计算了一个简单的推进剂管理装置，并和实验进行了比较，结果表明理论和实验较为符合。