超/亚声速混合层压力不匹配时流动特征

为了获得压力不匹配对超/亚声速混合层空间分布与增长、压力分布和相似性等特征的影响规律,开展试验和数值模拟研究。通过粒子图像测速技术PIV测量混合层空间分布,标准k-ω模型模拟稳态流场特征。超声速气流马赫数为1.32,亚声速气流马赫数为0.11,五组不同压比分别为0.82,0.95,1.11,1.22和1.47。研究结果表明：压力不匹配对混合层增长的影响较弱;当压比>1时,混合层沿流向呈现波纹分布,静压呈现高、低压交替分布;压比增加,混合层内无量纲速度分布不变,无量纲总压减小,而湍流强度增加。基于无粘假设的预测模型捕捉了波节的基本结构与分布。     

八面体桁架结构在内冷通道中的流动传热特性研究

为探究八面体桁架结构在航空发动机热端部件内冷通道中的可应用性,掌握八面体桁架结构的流动传热特性,本文采用理论推导和三维数值模拟的方法,对八面体桁架单体的有效导热系数以及八面体桁架阵列结构的流动结构和传热性能开展了研究。首先,针对八面体桁架单体结构,推导出了考虑节点效应的有效导热系数关系式,并通过与数值计算结果对比,验证了其有效性。其次,针对八面体桁架阵列结构,开展了整体结构的三维数值计算,分析了其内部通道的流动结构和温度分布,获得了不同结构的流动阻力和对流传热系数随雷诺数的变化规律。最后,考虑到结构的综合传热性能,本文针对不同孔隙率的八面体桁架阵列结构,进行了基于相同泵功率下努塞尔数的对比。根据计算结果,本文给出了获得最佳传热性能的无量纲直径范围0.07~0.08,相应的孔隙率变化范围 0.872~0.841。分析其原因,由于随着结构孔隙率的减小,即固体率的增加,对流传热强度不断提高,然而,当孔隙率减小到84.1%以下时,由于内通道中流动阻力骤然增大,导致传热效率降低。将八面体桁架结构应用于航空发动机热端部件内冷通道中,是同时出于高效冷却和力学性能的考虑,本文掌握八面体桁架阵列结构的流动传热特性,为其在实际工程中的应用提供了理论支撑。     

Use of reduce gravity conditions for the measurements of forces acting against the displacement of liquids inside containers

A setup called Controlled Rotation of Liquids (CROL) has been developed and used to investigate rotational behavior of liquids interacting with solids under reduced gravity conditions. The CROL setup allows us to evaluate the acceleration needed to overcome the interfacial forces that hinder liquid displacement inside different size containers. The well known Wilhelmy equation is used to explain the experimental results. Comparison between experimental results and theoretical predictions are presented and discussed.     

地方政府经济行为与制度创新

国有资本营运主体是国有企业，国有企业营运主体是企业家，由于地方政府在国民经济运行中所处的特殊地位，决定其经济行为对我国国有资本营运过程起举足轻重的作用，所以，制度创新与规范地方政府经济行为，也就成为现阶段改善国有资本驼绩效的战略选择。     

Experimental investigation of surface roughness effects on flow behavior and heat transfer characteristics for circular microchannels

This paper experimentally investigates the effect of surface roughness on flow and heat transfer characteristics in circular microchannels. All test pieces include 44 identical, parallel circu-lar microchannels with diameters of 0.4 mm and 10 mm in length. The surface roughness of the microchannels is Ra=0.86, 0.92, 1.02 lm, and the Reynolds number ranges from 150 to 2800. Results show that the surface roughness of the circular microchannels has remarkable effects on the performance of flow behavior and heat transfer. It is found that the Poiseuille and Nusselt num-bers are higher when the relative surface roughness is larger. For flow behavior, the friction factor increases consistently with the increasing Reynolds number, and it is larger than the constant the-oretical value for macrochannels. The Reynolds number for the transition from laminar to turbu-lent flow is about 1500, which is lower than the value for macrochannels. For the heat transfer property, Nusselt number also increases with increasing Reynolds number, and larger roughness contributes to higher Nusselt number.     

Turbulent boundary layer separation control using plasma actuator at Reynolds number 2000000

An experimental investigation was conducted to evaluate the effect of symmetrical plasma actuators on turbulent boundary layer separation control at high Reynolds number. Compared with the traditional control method of plasma actuator, the whole test model was made of aluminum and acted as a covered electrode of the symmetrical plasma actuator. The experimental study of plasma actuators' effect on surrounding air, a canonical zero-pressure gradient turbulent boundary, was carried out using particle image velocimetry(PIV) and laser Doppler velocimetry(LDV) in the 0.75 m × 0.75 m low speed wind tunnel to reveal the symmetrical plasma actuator characterization in an external flow. A half model of wing-body configuration was experimentally investigated in the  3.2 m low speed wind tunnel with a six-component strain gauge balance and PIV. The results show that the turbulent boundary layer separation of wing can be obviously suppressed and the maximum lift coefficient is improved at high Reynolds number with the symmetrical plasma actuator. It turns out that the maximum lift coefficient increased by approximately 8.98% and the stall angle of attack was delayed by approximately 2° at Reynolds number2 ×10~6. The effective mechanism for the turbulent separation control by the symmetrical plasma actuators is to induce the vortex near the wing surface which could create the relatively largescale disturbance and promote momentum mixing between low speed flow and main flow regions.     

Aerodynamic performance enhancement of a flying wing using nanosecond pulsed DBD plasma actuator

Experimental investigation of aerodynamic control on a 35 swept flying wing by means of nanosecond dielectric barrier discharge(NS-DBD) plasma was carried out at subsonic flow speed of 20–40 m/s, corresponding to Reynolds number of 3.1 · 105–6.2 · 105. In control condition, the plasma actuator was installed symmetrically on the leading edge of the wing. Lift coefficient, drag coefficient, lift-to-drag ratio and pitching moment coefficient were tested with and without control for a range of angles of attack. The tested results indicate that an increase of 14.5% in maximum lift coefficient, a decrease of 34.2% in drag coefficient, an increase of 22.4% in maximum lift-to-drag ratio and an increase of 2 at stall angle of attack could be achieved compared with the baseline case. The effects of pulsed frequency, amplitude and chord Reynolds number were also investigated.And the results revealed that control efficiency demonstrated strong dependence on pulsed frequency. Moreover, the results of pitching moment coefficient indicated that the breakdown of leading edge vortices could be delayed by plasma actuator at low pulsed frequencies.     

基于OODA过程的岛礁防空CGF模型

计算机兵力生成是军用仿真中的重要支撑技术。岛礁防空兵力生成是岛礁防空作战显示系统的关键部分。文章基于人类对外部事物认知、反应的OODA过程建立岛礁防空CGF行为模型,包括目标探测、威胁判断、火力分配及毁伤评估4个部分,在此基础上实现岛礁防空作战显示系统。