含腐蚀预损伤铝合金2024-T62的疲劳断裂行为及基于断裂力学的寿命预测

针对2024-T62铝合金薄板系统地开展了腐蚀预损伤对材料疲劳S-N曲线、小裂纹萌生行为、长短疲劳裂纹扩展及物理小裂纹门槛值扩展行为的影响等试验研究.结果表明:腐蚀预损伤对材料疲劳S-N曲线及材料疲劳小裂纹萌生行为有明显的影响,但时材料长短裂纹扩展及物理小裂纹门槛值扩展行为没有明显的影响.通过假定腐蚀预损伤为初始小裂纹...     

内乘波式进气道与典型侧压式进气道的性能对比

采用流线追踪技术,基于一种有利于均匀性的基本流场,按内乘波式进气道设计方法生成了一个来流马赫数6.0且进出口形状均为矩形的内乘波式进气道。其设计马赫数、迎风面形状等因素均参照某典型侧压式进气道选取,以便与之对比。CFD计算结果给出了设计状态下该内乘波式进气道与某典型侧压式进气道的流量系数、总压恢复、动能效率等主要性能指标,发现该内乘波式进气道的各项性能参数均略优于侧压式进气道。在非设计马赫数、攻角、侧滑等非设计状态下类似的性能对比研究表明,该内乘波式进气道不仅在设计状态下可捕获98%的来流,而且在各非设计状态下也可捕获91%以上的来流,流量捕获性能优势明显。以上结果证实:实现三维压缩与激波贴口的内乘波式进气道是一种高性能的定几何进气道方案。     

国有企业改制中的政府行为分析——兼评河北省首例诉政府国企改制无效案

国企改制是一个复杂的社会问题,容易导致各种利益冲突.面对改制中的各种纷争政府应如何面对?在国企改制中政府应当做什么以及不应当做什么?本文结合国企改制中发生的一起案件,探究国企改制中政府行为存在的问题及应对措施,准确定位政府在国企改制中的角色,规范政府行为.     

Recent Developments on Damage and Fracture of Thin-Walled Complex Components Produced by Spinning

The spinning technique has been widely used in the manufacture of aerospace thin-walled axisymmetric components because of its excellent formability. Damage and fracture, as the important defects that often occur and must be avoided in the forming and service stages of components, have attracted much attention of researchers. In this paper, the fracture behavior and laws of spinning components such as conical parts, tubular parts, and components with inner ribs are summarized, the typical coupled and uncoupled ductile fracture models are introduced, and their applications in spinning are analyzed. Meanwhile, the recent developments on the modified ductile fracture model in analyzing damage and fracture mechanisms of spinning are emphatically introduced. The results could provide guidance for the selection and establishment of appropriate ductile fracture models in the finite element simulation for the accurate prediction and analysis of fracture moment, location, form, damage mechanism, and evolution law, and help the development of precision spinning techniques for high-performance thin-walled complex components.     

超声速和高超声速横向喷流数值模拟

为了解横向喷流的干扰影响和喷口附近的流场结构,采用分块对接网格和“0”型网格技术,数值求解N—S方程来模拟超声速和高超声速流场中横向喷流的干扰流场。对两种尖拱弹身外形的超声速和高超声速喷流干扰流场进行了数值计算,计算结果与风洞实验数据吻合一致。在此基础上,开展了某型导弹多喷构型干扰流场的数值模拟,得出一些横向喷流数值模拟的结论。     

月面巡视探测器行为控制初探

阐述了月面巡视探测器几种行为控制结构的特点,详细阐述了巡视探测器的导航运动控制方式,研究了国外巡视探测器的导航运动控制特点;并以此提出了巡视探测器基于模糊逻辑的分层行为控制模式,举例说明了巡视探测器的行为描述方式。     

基于FGN输入流的G/D/1排队模拟

传统的排队理论不适于分析高速网络表现出的自相似流量.通过实验仿真,主要考察平均等待时间和在队列分别为无限和有限情形下的队列尾部特征等参数,并对以FGN为输入流的G/D/1排队模型作了定性分析.结果表明在输入流的强度和方差基本相等且系统利用律大于某一阈值的情况下,队列平均等待时间随Hurst参数增大而显著增长.同时指出在相同的条件下考察队列尾部特征,具有有限队列长度的G/D/1排队模拟结果要远优于无限队列长度下的理论分析结果.      

超高频脉冲电弧焊接熔池金属流动行为

熔池金属流动一方面受电弧行为影响,另一方面与凝固组织形核、结晶过程联系紧密,是电弧焊接基础研究的关键,针对电弧力作用研究了超高频脉冲电弧焊接(UHFP-AW,Ultra High Frequency Pulsed Arc Welding)熔池金属流动特点,采用理论研究与试验分析相结合的方式对熔池流动方式、强度、温度分布等要素进行了分析,并完成了液态金属表面运动特征监测.结果表明,超高频脉冲电弧对熔池液态金属的热、力作用显著,表面流体流速大于30cm/s,UHFP-AW电弧力造成熔池表面沉降变形,引起双环流,熔池温度扩散范围相应减小,有效降低了电弧热量对母材金属的影响,尤其在钛合金焊接中对控制焊缝晶粒尺寸具有重要意义.      

Lumped element modelling of synthetic jet actuators

In this paper, a lumped element model of synthetic jet actuator is presented and used to predict the temporal variation of the jet velocity. Unlike the previous model reported in the literature, in this model the mechanical movement of the diaphragm is decoupled from the fluid phenomenon in the actuator cavity to allow the modelling of fluid mechanics aspect of the actuator to be investigated and validated separately. Furthermore, the “minor losses” occurring at the orifice exit is included and linked to the jet exit velocity profile. The results from this model are validated using the existing experimental data and CFD simulations. It is found that this model is capable of predicting the temporal variation of synthetic jets both in phase and magnitude when the actuator is operating away from the Helmholtz resonance frequency. Although the model fails to predict the correct phase information at the Helmholtz resonance frequency, it can still produce the jet peak velocity that is in good agreement with the experimental data. The lumped element model presented in this paper can be used to provide a reliable prediction of the jet peak velocity needed in the initial design of synthetic jet actuators for practical applications.     

高超声速球锥组合体流场数值分析

用数值模拟法研究了高超声速球锥组合体的层流流场特性与热行为,给出了流场计算方法与格式。研究结果表明：球锥组合体压缩拐角在高超声速下出现流动分离,其流动特性受壁面温度的影响极大;提高壁面温度使压缩拐点处分离点位置前移,再附点位置后移,涡心位置提高,分离范围扩大,同时降低球锥组合体热流的分布,球锥组合体头部热流明显减小。