地面长时间微重力装置原理及设计

采用串联的Maxwell摆作为主机构，可以实现地面上长时间、低速度的连续失重环境，解决了地面上长时间失重伴随的速度无限增大及加速度反弹问题。     

飞行轨迹稳定性应用的分析

首先根据飞行轨迹稳定性的数学模型，得出了飞机在闭环条件下扰动过程速度的变化规律及飞行轨迹稳定性的应用条件，并且结合不同类型的飞机进行了对比分析。然后以推力曲线为基础分析了不同类型飞机的临速度范围，并根据飞机级曲线对飞行轨迹稳定性界状态与有利速度的关系进行了分析。     

在轨温度环境对J-47C 胶黏剂粘接性能的影响

为考察在轨温度环境对J-47C结构胶黏剂粘接性能的影响,利用动态热机械分析和热重分析方法,对其Tg、热分解温度进行了测试,掌握了胶黏剂的耐热指标。通过不同温度下力学性能测试,温度冲击及真空热循环试验研究了卫星特殊的温度环境对胶黏剂性能的影响。结果表明,J-47C胶黏剂在高温以及真空热循环和温度冲击后其仍具有较高的力学强度保持率,满足卫星的温度环境对胶黏剂性能的需求。     

On the stability of flexible aircraft

The problem of aircraft stability has been a subject of concern since the beginnings of flight. Traditionally, aircraft stability has been treated within the confines of two separate disciplines, namely, flight dynamics and aeroelasticity. Based on some recent developments in the dynamics and control of flexible aircraft, this investigation uses the system concept to provide a broader approach to aircraft stability in an attempt to bridge the gap between stability as understood in flight dynamics and stability as envisioned in aeroelasticity. To this end, stability is studied in the following four cases: 1) dynamics of whole flexible aircraft using the unified formulation, 2) flight dynamics of quasi-rigid aircraft (aircraft treated as rigid), 3) aeroelasticity of flexible components, such as cantilever wing, cantilever horizontal stabilizer, etc., and 4) aeroelasticity of restrained flexible aircraft (aircraft fixed to a point, hence, having no rigid body degrees of freedom). The paper also presents a method to address the stability of flexible aircraft when the compressibility correction factor is known only at some discrete Mach numbers.     

综合智能产品模型研究

现在复杂产品的研发需要一个协同的支撑平台,将人员、工具和过程集成起来。对产品以及相关数据的建模是实现协同支撑平台的关键,在分析国内外相关研究的基础上提出了综合智能产品模型(CSPM)的概念。在CSPM基础上,依据J2EE规范建立了综合智能产品数据环境(CSPDE)。     

Two freedom linear parameter varying μ synthesis control for flight environment testbed

To solve the problem of robust servo performance of Flight Environment Testbed(FET)of Altitude Ground Test Facilities(AGTF) over the whole operational envelope, a two-degree-offreedom μ synthesis method based on Linear Parameter Varying(LPV) schematic is proposed, and meanwhile a new structure frame of μ synthesis control on two degrees of freedom with double integral and weighting functions is presented, which constitutes a core support part of the paper. Aimed at the problem of reference command's rapid change, one freedom feed forward is adopted, while another freedom output feedback is used to meet good servo tracking as well as disturbance and noise rejection; furthermore, to overcome the overshoot problem and acquire dynamic tuning,the integral is introduced in inner loop, and another integral controller is used in outer loop in order to guarantee steady errors; additionally, two performance weighting functions are designed to achieve robust specialty and control energy limit considering the uncertainties in system. As the schedule parameters change over large flight envelope, the stability of closed-loop LPV system is proved using Lyapunov inequalities. The simulation results show that the relative tracking errors of temperature and pressure are less than 0.5% with LPV μ synthesis controller. Meanwhile, compared with non-LPV μ synthesis controller in large uncertainty range, the proposed approach in this research can ensure robust servo performance of FET over the whole operational envelope.     

湿热环境下复合材料孔板压缩性能的研究

采用压缩试验的方法,对含孔机织碳纤维环氧复合材料层板进行了湿热环境下的压缩试验,研究了湿热环境对其压缩性能的影响。分析了复合材料孔板的吸湿特性、压缩强度、破坏模式及动态力学性能。结果表明:机织碳纤维环氧复合材料吸湿率较低,其饱和吸湿率仅为0.88%左右。湿热环境会降低由基体性能主导的压缩强度,130℃下湿态试样的开孔压缩强度保持率约为70%。含孔复合材料层合板的破坏模式均为过孔破坏,破坏均发生在应力集中的区域,并且断裂都是沿着应力集中最大的方向扩展。侧面断口主要为剪切失效,有分层和屈曲的特征。吸湿后复合材料的DMA Tg为125℃,比干态时下降了16℃。     

MFOXBASE单用户到多用户转换及冲突处理的研究

本文通过ＭＦＯＸＢＡＳＥ，ＰＬＵＳ提供的一组出错命令和函数功能，解决怎样从单用户应用程序过渡到多用户应用程序，如何妥善处理因并发访问数据库而出现的冲突问题，使其在多用户环境下正常运行。     

An experimental analysis of situation awareness for cockpit display interface evaluation based on flight simulation

Aircraft cockpit display interface (CDI) is one of the most important human-machine interfaces for information perceiving. During the process of aircraft design, situation awareness (SA) is frequently considered to improve the design, as the CDI must provide enough SA for the pilot to maintain the flight safety. In order to study the SA in the pilot-aircraft system, a cockpit flight simulation environment is built up, which includes a virtual instrument panel, a flight visual display and the corresponding control system. Based on the simulation environment, a human-in-the-loop experiment is designed to measure the SA by the situation awareness global assessment technique (SAGAT). Through the experiment, the SA degrees and heart rate (HR) data of the subjects are obtained, and the SA levels under different CDI designs are analyzed. The results show that analyzing the SA can serve as an objective way to evaluate the design of CDI, which could be proved from the consistent HR data. With this method, evaluations of the CDI design are performed in the experimental flight simulation environment, and optimizations could be guided through the analysis.