多因素影响下的起落架收放系统性能分析

起落架收放系统是集机、电、液的混合复杂系统,影响收放性能的因素也呈多样性.针对目前大多研究并未较好地将收放各部分系统综合考虑的研究现状,提出了一套结合理论分析、多学科仿真技术及试验验证的分析方法,为起落架收放系统提供了较准确的分析手段.首先采用功率键合图法详细地推导了起落架收放系统动力学方程;在理论模型的基础上,建立了结合起落架动力学和液压系统的多学科协同仿真模型,并用试验结果对虚拟样机模型进行验证;最后详细讨论了混合系统中各关键参数对起落架收放性能的影响.研究结果表明,联合仿真模型的压力曲线与试验实测数据吻合良好,同时侧风、摩擦阻力、阻尼孔、液弹、油液泄漏等关键参数对收放性能都有不同程度的影响,分析结果可用于指导起落架收放参数设计、收放故障分析及可靠性研究.      

飞翼布局无人机进排气影响及机理分析

进气道尾喷管的存在不仅影响着飞机机身前后的流场特性与压力分布,而且影响着飞机升力特性、阻力特性以及力矩特性.为了研究进排气效应对飞机气动特性的影响,采用计算流体力学(CFD)数值模拟技术,建立飞翼布局无人机(UAV)堵锥整流模型和动力影响模型,其中动力影响模型是根据发动机不同的工作状态,在进气道以及尾喷管截面上设置不同的边界条件,对比分析这两种计算模型在流场特征和气动特性上的差异性,揭示内在的影响机理.进排气效应的研究有助于飞机/发动机的一体化气动综合设计.      

Experimental investigations of a full model with adaptive elasto-flexible membrane wings

The morphing wing concept aims to constantly adapt the aerodynamics to different flight stages. The wing is able to adapt to different flight conditions by an adjustable Aspect Ratio (AR) and sweep. A high AR configuration provides high aerodynamic efficiency, while a low AR configuration, with highly swept wings offers a good maneuverability. Additionally, the flexible membrane allows the wing surface to stretch and contract in-plane as well as the airfoil to adapt to different aerodynamic loads. In the context of this work, the aerodynamic characteristics of a full model with form-adaptive elasto-flexible membrane wings are investigated experimentally. The focus is on the high-lift regime and on the analysis of the aerodynamic coefficients as well as their sensitivities. Especially, the lateral aerodynamic derivatives at asymmetric wing positions are of interest.     

Continuous morphing trailing-edge wing concept based on multi-stable nanomaterial

Morphing technology is one of the most effective methods to improve the flight efficiency of aircraft. Traditional control surfaces based morphing method is mature and widely used on current civil and military aircraft, but insufficiently effective for the entire flight envelope. Recent research on morphing wing still faces the challenge that the skin material for morphing should be both deformable and stiff. In this study, a continuous morphing trailing-edge wing with a new multi-stable nano skin material fabricated using surface mechanical attrition treatment technology was proposed and designed. Computational fluid dynamics simulation was used to study the aerodynamic performance of the continuous morphing trailing-edge wing. Results show that the lift coefficient increases with the increase of deflection angle and so does the lift-drag ratio at a small angle of attack. More importantly, compared with the wing using flaps, the continuous morphing trailing-edge wing can reduce drag during the morphing process and its overall aerodynamic performance is improved at a large angle of attack range. Flow field analysis reveals that the continuous morphing method can delay flow separation in some situations.     

卫星氢镍蓄电池电解液在轨回流特性仿真

氢镍蓄电池电解液在轨流动特性是影响其工作性能和使用寿命的重要因素,对蓄电池设计与优化具有重要意义。针对高轨通信卫星使用的80Ah氢镍蓄电池,建立了电解液流动运动的三维仿真模型,采用计算流体动力学（CFD）数值仿真方法,对氢镍蓄电池单体内的电解液在轨微重力条件下的流动特性和分布特点进行了仿真研究。通过对比分析不同边界条件下的仿真结果,提出了在蓄电池极堆与壳体两端之间增加电解液流动路径可以提高电解液回流速度,并改进卫星氢镍蓄电池在轨工作性能,研究结果可为卫星蓄电池和电源系统设计提供参考。     

航天器薄壳柔性附件展开耦合行为特性研究

为研究大范围运动柔性附件几何非线性和耦合效应与中心刚体的精确动力学行为,以薄壳结构柔性附件为研究对象,引入非线性应变和位移关系,利用虚功原理推导了做大范围运动带柔性附件航天机构的完整非线性动力学模型,所构建的模型包含了非线性几何变形及附加非线性项。针对线性和非线性模型,相应开展了大范围运动航天机构刚柔耦合数值分析。结果表明,随着转速增大,线性与非线性模型动力学特性产生根本差异,指出线性模型忽略了非线性耦合项的不足,而非线性模型可精确地预测大范围运动带柔性附件航天机构动力学行为。结论对航天机构定向和跟踪操作的动力学与控制具有重要的理论价值及工程实际意义。     

基于等效质量的太空机械臂多体系统碰撞分析

从等效质量角度出发,针对不同的操作环境,提出多体系统离散碰撞动力学建模及连续碰撞动力学建模方法,并分析碰撞对系统造成的影响。首先,由系统动力学方程及能量方程推导出太空机械臂末端等效质量,在此基础上,针对刚/柔环境,分别建立多体系统离散碰撞动力学模型和连续碰撞动力学模型,并针对七种连续碰撞模型提出选取标准,以便更真实地模拟实际碰撞过程。最后,以典型的太空七自由度机械臂为例开展仿真试验,两种方法的对比结果校验了该算法的正确性。     

三角平动点附近高阶解在轨道位置保持中的应用

首先给出三角平动点附近的高阶解析解,并计算了三种特殊的运动类型。以日–地+月系三角平动点附近无长周期运动分量的拟周期轨道作为目标轨道,探讨轨道保持问题。针对三角平动点任务的轨道保持问题,我们研究了两种轨道保持策略,分别为多点打靶轨道保持与重构目标轨道的策略。计算中,将轨道控制问题转化为非线性规划问题,并以优化方法求解。仿真表明优化方法在轨道保持问题求解方面非常有效。     

针对失控翻滚目标航天器的交会对接控制

研究了一个受控的追踪航天器和一个失控慢速翻滚的目标航天器的末段交会对接控制问题。通过引入基于特征模型的控制方法,设计了相对位置跟踪控制器以及姿态同步控制器,克服了针对目标航天器测量中存在的较大不确定时延,航天器动力学参数的不确定性,以及追踪航天器存在的较大帆板挠性,实现了针对失控自旋目标的末段精确交会对接控制。最后,通过搭建仿真系统进行动力学仿真,进一步验证了本文控制策略的有效性。     

Transition characteristics for a small tail-sitter unmanned aerial vehicle

Research on the transition phase of tail-sitter Unmanned Aerial Vehicles (UAVs) is crucial for trajectory planning and performance analysis. This study focuses on the analysis of the transition characteristics and path of a small dual-rotor tail-sitter UAV, including static and dynamic computations. The system input time delay and actuator dynamics are specifically considered during the dynamic analysis, and these actual physical properties ensure that the computation results are reliable and reasonable. The UAV steady-state limit is obtained through static analysis, which is also adopted to verify the correctness of the dynamic results. In regard to the dynamic analysis, several typical transition approaches are computed based on different initial states and optimization objective functions, and the different computations are applicable under specific task conditions. The off-line dynamic results of the transition path and actuator output sequence could also be adopted as reference values for the transition process during real flight. A comparison of the static and dynamic results illustrates the necessity of combining these two methods for UAV transition characteristic analysis. Furthermore, the UAV conceptual parameters related to the transition path are also studied, and the obtained quantitative characteristics provide feedback for the UAV conceptual design.