基于内模原理的复杂挠性卫星姿态控制研究

首先对具有运动挠性附件的航天器的姿态动力学模型进行了简要讨论和分析,证明了对于受步进扰动的复杂挠性卫星系统,采用输出反馈PD控制仅能得到一致有界稳定的结论。为了获得闭环系统的渐近稳定性能,进一步构造了具有内模补偿的PD控制系统,并且根据Lyapunov理论给出了严格证明。基于美国GOES 8号静止轨道气象卫星公布的动力学参数,对PD控制及含有内模补偿的PD控制两类控制器进行了仿真对比,以校验所设计控制系统的有效性。最后,进行了总结并提出进一步的研究设想。     

柔性绳网动力学建模与天地差异性分析

采用有限元模型研究了柔性绳网系统的动力学特性。针对空间绳网直接弹射展开方式,首先将绳网离散为若干单元,各单元处理为非线性“半阻尼弹簧”模型,然后分别计算各单元所受气动力和重力,最终建立绳网系统多柔体动力学模型。基于所建立的动力学模型分别对柔性绳网在地面和太空展开的动力学过程进行了仿真分析,研究了绳网在展开面积、空间位形和飞行距离等方面的天地差异性及其动力学机理,为未来空间绳网系统的分析设计提供理论参考。     

Behavior of tethered debris with flexible appendages

Active exploration of the space leads to growth of a near-Earth space pollution. The frequency of the registered collisions of space debris with functional satellites highly increased during last 10 years. As a rule a large space debris can be observed from the Earth and catalogued, then it is possible to avoid collision with the active spacecraft. However every large debris is a potential source of a numerous small debris particles. To reduce debris population in the near Earth space the large debris should be removed from working orbits. The active debris removal technique is considered that intend to use a tethered orbital transfer vehicle, or a space tug attached by a tether to the space debris. This paper focuses on the dynamics of the space debris with flexible appendages. Mathematical model of the system is derived using the Lagrange formalism. Several numerical examples are presented to illustrate the mutual influence of the oscillations of flexible appendages and the oscillations of a tether. It is shown that flexible appendages can have a significant influence on the attitude motion of the space debris and the safety of the transportation process.     

Effects of uncertainties and flexible dynamic contributions on the control of a spacecraft full-coupled model

One of the most important problems for performing a good design of the spacecraft attitude control law is connected to its robustness when some uncertainty parameters are present on the inertial and/or on the elastic characteristics of a satellite. These uncertainties are generally intrinsic on the modeling of complex structures and in the case of large flexible structures they can be also attributed to secondary effects associated to the elasticity. One of the most interesting issues in modeling large flexible space structures is associated to the evaluation of the inertia tensor which in general depends not only on the geometric ‘fixed’ characteristic of the satellite but also on its elastic displacements which of course in turn modify the ‘shape’ of the satellite. Usually these terms can be considered of a second order of magnitude if compared with the ones associated to the rigid part of a structure. However the increasing demand on the dimension of satellites due to the presence for instance of very large solar arrays (necessary to generate power) and/or large antennas has the necessity to investigate their effects on their global dynamic behavior in more details as a consequence. In the present paper a methodology based on classical Lagrangian approach coupled with a standard Finite Element tool has been used to derive the full dynamic equations of an orbiting flexible satellite under the actions of gravity, gravity gradient forces and attitude control. A particular attention has been paid to the study of the effects of flexibility on the inertial terms of the spacecraft which, as well known, influence its attitude dynamic behavior. Furthermore the effects of the attitude control authority and its robustness to the uncertainties on inertial and elastic parameters has been investigated and discussed.     

挠性航天器的鲁棒多目标姿态控制器设计

航天器挠性附件的振动难以直接测量且对航天器的姿态控制精度产生不利影响。为解决这一问题,提出一种基于观测器的鲁棒多目标姿态控制系统设计方法,借助特征结构配置的参数化方法,给出了含有自由参向量的控制器以及观测器的完整参数化形式。通过对自由参向量的多目标优化选取,使控制系统具有良好的鲁棒性和干扰抑制能力,并避免了控制输出饱和现象的发生。对一个挠性航天器的设计实例表明了方法的有效性。
     

柔性锥-杆式对接机构碰撞过程仿真研究

以中小型航天器普遍采用的锥-杆式对接机构为研究对象,提出一种柔性对接锥作为缓冲系统的方案,用柔性锥变形吸收撞击能量作为缓冲。用有限元法对碰撞过程进行仿真,讨论了柔性对接锥作为缓冲系统的性能对对接过程的影响。仿真结果表明:与普通对接锥相比,柔性锥能减小碰撞力峰值50%多。     

旋转状态柔性附件航天器振动及其变结构控制

基于Hamilton变分原理,采用Mindlin厚板理论,研究了旋转状态中心刚体—悬臂厚板振动及其变结构控制问题。采用Hamilton状态空间法,应用弹性波与振动模态理论,确定了Mindlin厚板中的振动模态。针对该模型系统设计了控制器,采用滑模变结构控制理论,实现了对系统实施渐近稳定控制的设计。采用的变结构控制能使系统达到所期望的振动状态,有效地抑制了平板振动。最后,给出了数值模拟结果,讨论了中心刚体—悬臂厚板位移的动力学控制规律。该方法和计算结果可望能在带有柔性附件航天器的动力学控制中得到应用。     

含固定转速驱动电机的挠性卫星自旋稳定性分析

分析一类含驱动电机挠性卫星的自旋稳定性,应用不变集定理证明了系统轨迹收敛于系统平衡点集,并通过构造正定的单调递减的类能量函数来判断各平衡点的稳定性质。获得的结论包括：由于挠性振动阻尼特性,在无外扰力矩作用时,含固定转速驱动电机的挠性卫星存在稳定的自旋;不含驱动电机的挠性卫星,稳定的自旋轴为其最大主惯量轴;驱动电机可改变挠性卫星的自旋轴,给出了稳定的自旋轴与电机转速方向夹角公式,该夹角为锐角;当电机转动角动量幅值远小于系统角动量时,稳定自旋轴接近最大主惯量轴;电机转动角动量幅值越接近系统角动量,稳定自旋轴越接近电机转动方向。文中也给出了稳定自旋轴平行电机转轴的条件。     

Effects of wing flexibility on aerodynamic performance of an aircraft model

The low-speed wind tunnel experiment is carried out on a simplified aircraft model to explore the influence of wing flexibility on the aircraft aerodynamic performance. The investigation involves the measurements of force, membrane deformation and velocity field at Reynolds number of 5.4 × 10⁴–1.1 × 10⁵. In the lift curves, two peaks are observed. The first peak, corresponding to the stall, is sensitive to the wing flexibility much more than the second peak, which nearly keeps constant. For the optimal case, in comparison with the rigid wing model, the delayed stall of nearly 5° is achieved, and the relative lift increment is about 90%. It is revealed that the lift enhanced region corresponds to the larger deformation and stronger vibration, which leads to stronger flow mixing near the flexible wing surface. Thereby, the leading-edge separation is suppressed, and the aerodynamic performance is improved significantly. Furthermore, the effects of sweep angle and Reynolds number on the aerodynamic characteristics of flexible wing are also presented.     

基于混合蚁群算法的柔性模糊车间作业调度

采用蚁群算法作为全局搜索算法,提出一种混合搜索策略,用于求解柔性模糊Job Shop调度问题.根据模糊Job Shop调度问题解的特性,提出基于