钢板数控下料排样的一种优化算法

讨论了毛坯需求需要精确满足的不规则型毛坯数控气割下料排样问题。采用组块剪切排样法,排样时首先形成矩形组块,然后使组块在板材上优化排列。本文对两维约束排样算法进行修改,使之能生成所述排样问题的切割方式。最后应用所述算法给出变压器生产中钢板数控下料实例的优化排样方案,并与手工排样结果进行了对比     

缺口件疲劳寿命预测新方法

采用有限元方法针对缺口件多轴疲劳实验结果进行模拟。结果表明,相同路径条件下,随着缺口半径减小缺口根部附近的应力梯度显著增加。基于缺口根部应变值,采用等效应变法进行疲劳寿命预测,预测结果随缺口半径的减小而偏于保守。采用应力梯度法确定有效距离,相同路径下,随着缺口半径的减小有效距离减小;依据该有效距离处的等效应变进行疲劳寿命预测,总体预测结果较为分散且偏于不安全。基于实验及有限元模拟结果,提出了基于应变梯度的有效距离确定的新方法,大部分疲劳寿命预测结果位于2倍分散带内。     

一种线运动扰动环境下基于惯性凝固系抗干扰自对准优化算法研究

传统惯性凝固性对准技术可有效隔离角运动干扰环境对捷联惯导自对准精度的影响,但对线运动环境下的抗干扰能力不足.据此,在深入分析线运动干扰对捷联惯导惯性凝固系下自对准精度影响途径之上,对线运动干扰环境划分为速度周期波动、突跳以及速度短期线性漂移.提出采用积分降噪、载体惯性系速度递推拟合与基于带遗忘因子递推最小二乘的速度慢漂提取技术相结合的抗干扰自对准优化算法,并进行了试验验证.试验结果表明,本算法可在5min内实现1.3mil的抗干扰自对准精度.     

The International DORIS Service (IDS): Toward maturity

DORIS is one of the four space-geodetic techniques participating in the Global Geodetic Observing System (GGOS), particularly to maintain and disseminate the Terrestrial Reference Frame as determined by International Earth rotation and Reference frame Service (IERS). A few years ago, under the umbrella of the International Association of Geodesy, a DORIS International Service (IDS) was created in order to foster international cooperation and to provide new scientific products. This paper addresses the organizational aspects of the IDS and presents some recent DORIS scientific results. It is for the first time that, in preparation of the ITRF2008, seven Analysis Centers (AC’s) contributed to derive long-term time series of DORIS stations positions. These solutions were then combined into a homogeneous time series IDS-2 for which a precision of less than 10 mm was obtained. Orbit comparisons between the various AC’s showed an excellent agreement in the radial component, both for the SPOT satellites (e.g. 0.5–2.1 cm RMS for SPOT-2) and Envisat (0.9–2.1 cm RMS), using different software packages, models, corrections and analysis strategies. There is now a wide international participation within IDS that should lead to future improvements in DORIS analysis strategies and DORIS-derived geodetic products.     

高强度钢Domex700MCD焊接性能研究

分析了Domex700MCD焊接性,并通过试验及数据分析表明,在焊接工艺中,采用混合气体保护焊、低合金结构钢焊丝ER69-3,通过控制焊接线能量,运用合理的焊接规范,可获得良好的焊缝机械性能。     

国外新型热作模具钢及其热处理工艺

主要叙述了H13、QRO80M、QRO90SUPREME等新型热作模具钢的性能、使用特点及其热处理工艺技术方法。     

主/从动式组合旋翼悬停状态气动特性分析

针对传统直升机构型中主旋翼旋转时产生的扭矩需要尾翼或是反向旋转的共轴旋翼加以抵消,从而造成能量浪费的问题,以将主旋翼旋转时产生的扭矩转化为升力为出发点,提出了一种主旋翼带动下方无动力旋翼旋转的主/从动式组合旋翼气动布局构型。通过动量叶素理论以及CFD数值模拟中的多重参考系法,对主/从动式组合旋翼悬停状态的气动特性进行了初步分析,结果表明,此构型中的下方从动旋翼利用上方主动旋翼的扭矩产生了额外10%的升力,同时下方从动旋翼在上方主动旋翼引流的有利干扰下升力系数提高了35%。     

IDS contribution to ITRF2008

For the first time, the International DORIS Service (IDS) has produced a technique level combination based on the contributions of seven analysis centers (ACs), including the European Space Operations Center (ESOC), Geodetic Observatory Pecny (GOP), Geoscience Australia (GAU), the NASA Goddard Space Flight Center (GSFC), the Institut Géographique National (IGN), the Institute of Astronomy, Russian Academy of Sciences (INASAN, named as INA), and CNES/CLS (named as LCA). The ACs used five different software packages to process the DORIS data from 1992 to 2008, including NAPEOS (ESA), Bernese (GOP), GEODYN (GAU, GSC), GIPSY/OASIS (INA), and GINS (LCA). The data from seven DORIS satellites, TOPEX/Poseidon, SPOT-2, SPOT-3, SPOT-4, SPOT-5, Envisat and Jason-1 were processed and all the analysis centers produced weekly SINEX files in either variance–covariance or normal equation format. The processing by the analysis centers used the latest GRACE-derived gravity models, forward modelling of atmospheric gravity, updates to the radiation pressure modelling to improve the DORIS geocenter solutions, denser parameterization of empirically determined drag coefficients to improve station and EOP solutions, especially near the solar maximum in 2001–2002, updated troposphere mapping functions, and an ITRF2005-derived station set for orbit determination, DPOD2005. The CATREF software was used to process the weekly AC solutions, and produce three iterations of an IDS global weekly combination. Between the development of the initial solution IDS-1, and the final solution, IDS-3, the ACs improved their analysis strategies and submitted updated solutions to eliminate troposphere-derived biases in the solution scale, to reduce drag-related degradations in station positioning, and to refine the estimation strategy to improve the combination geocenter solution. An analysis of the frequency content of the individual AC geocenter and scale solutions was used as the basis to define the scale and geocenter of the IDS-3 combination. The final IDS-3 combination has an internal position consistency (WRMS) that is 15 to 20 mm before 2002 and 8 to 10 mm after 2002, when 4 or 5 satellites contribute to the weekly solutions. The final IDS-3 combination includes solutions for 130 DORIS stations on 67 different sites of which 35 have occupations over 16 years (1993.0–2009.0). The EOPs from the IDS-3 combination were compared with the IERS 05 C04 time series and the RMS agreement was 0.24 mas and 0.35 mas for the X and Y components of polar motion. The comparison to ITRF2005 in station position shows an agreement of 6 to 8 mm RMS in horizontal and 10.3 mm in height. The RMS comparison to ITRF2005 in station velocity is at 1.8 mm/year on the East component, to 1.2 mm/year in North component and 1.6 mm/year in height.     

轻型塔架挠度速算法

本文介绍了轻型塔架的挠度速算法,并以三角形截面的钢塔架为例题作了计算公式推导。这种方法具有计算简单和具有足够精度的优点。     

GD钢贝氏体相变动力学研究

利用Ｆｏｒｍａｓｔｏｒ－Ｆ全自动相变仪对ＧＤ钢贝氏体相变动力学进行了系统的研究。结果表明,ＧＤ钢贝氏体等温转变相变动力学曲线可以用Ｊｏｈｎｓｏｎ－Ｍｅｈｌ型方程精确地加以描述。根据贝氏体相变的总激活能判断,试验钢上、下贝氏体相变的过渡温度约为２８５℃。