固体发动机壳体用D406A钢锻件的断裂韧度KIC测试研究

对固体发动机壳体用D406A超高强度锅锻件,进行了平面应变断裂韧度K_(IC)测试研究,获得了壳体重要部位实用锻件的K_(IC)值;找到了材料强度和断裂韧度合理匹配的碳含量范围,为壳体设计与安全使用及断裂分析提供了试验依据。     

304不锈钢的应力腐蚀断裂

用慢应变速率技术研究了敏化的304不锈钢在氧饱和的NaCl溶液中的应力腐蚀断裂(SCC)行为以及浓度、温度和电位的影响。结果表明,在90℃1000ppmNaCl溶液中,在5.5×10~(-6)s~(-1)应变速率下,电位大于-0.5V(相对于SCE,下同)有应力腐蚀敏感性。随着应变速率提高、浓度减小或温度降低,断裂电位范围移向较正的电位(-0.2V以上)。在较慢的应变速率下,在-0.5～-0.2V产生单裂纹;高于-0.2V对于所用的两种应变速率都产生多裂纹;低于-0.6V未发现裂纹。该体系的自腐蚀电位在-0.25V附近,处于SCC敏感区。恒电位下动态应变试验中电流增量与平均裂纹速度在双对数座标上呈正比关系,表明该体系的沿晶SCC本质上受溶解控制。     

论区域经济联动发展的系统构架

区域经济联动发展是经济全球化与区域经济一体化背景下的大势所趋,是立足全球发展、顺应世界经济潮流的必然选择.通过不同角度分析了区域经济联动发展的意义与内涵,概括了区域经济联动发展的主要特征,并就如何促进区域经济联动发展提出了策略和主张.     

Global GPS reference frame solutions of unlimited size

This paper reports on the Dancer project, which is one of three related projects initiated by working group 1 of the International Association of Geodesy. The Dancer project develops JAVA parameter estimation software that runs in the form of a distributed process on the internet, in such a way that each processing node handles the data of a single geodetic instrument. By exchanging a minimum amount of information among all processing nodes, the same global normal equation solution is found by all instruments. The result is a fully scalable least squares solution that has no practical limit to the number of GPS receivers or other tracking devices that may be included in a single reference frame realization.     

Analysis of the DORIS contributions to ITRF2008

In its function as an ITRS Combination Centre, DGFI is in charge with the computation of an ITRF2008 solution. The computation methodology of DGFI is based on the combination of datum-free normal equations (weekly or session data sets, respectively) of station positions and Earth orientation parameters (EOP) from the geodetic space techniques DORIS, GPS, SLR and VLBI. In this paper we focus on the DORIS part within the ITRF2008 computations. We present results obtained from the analysis of the DORIS time series for station positions, network translation and scale parameters, as well as for the terrestrial pole coordinates. The submissions to ITRF2008 benefit from improved analysis strategies of the seven contributing IDS analysis centres and from a combination of the weekly solutions of station positions and polar motion. The results show an improvement by a factor of two compared to past DORIS data submitted to ITRF2005, which has been evaluated by investigating the repeatabilities of position time series. The DORIS position time series were analysed w.r.t. discontinuities and other non-linear effects such as seasonal variations. About 40 discontinuities have been identified which have been compared with the results of an earlier study. Within the inter-technique combination we focus on the DORIS contribution to the integration of the different space geodetic observations and on a comparison of the geodetic local ties with the space geodetic solutions. Results are given for the 41 co-location sites between DORIS and GPS.     

Relationship Between Corrosion Level of Steel Bar and Diameter of Corroded Sensing Steel Wire in Wireless Sensor

A kind of wireless sensor was previously developed,which is powered and transmit signals wirelessly instead of using an electrical connection to the embedded reinforcement.Based on this technique,the relationship between diameters of corroded sensing steel wires and corrosion levels of steel bars is established by experiments.Quadratic function is utilized to fit the experiment results,and the correlation coefficients are all larger than 0.95.Estimated corrosion levels of commonly used steel bars are given for different diameters of corroded sensing steel wires fractured due to corrosion.     

SA-335P122材料管道焊接工艺研究

通过对1000MW超超临界锅炉四级过热器出口集箱和主蒸汽管道进行试验研究,发现锅炉管道存在环缝焊接式样不合格的问题.通过对管道SA-335P122材料进行力学性能分析,并结合试验数据,提出了新的工艺流程,采用了新的焊接材料和焊接工艺,通过试验验证了焊接流程的合理性,使产品制造一次合格.     

试用暗物质理论解释惯性和惯性力的物理机制(上)

基于对暗物质的多年探讨,我们认为宇宙空间是具有质量、相对均匀、连续稳定和有相当弹性暗物质群体(DMG)的空间.自然、宇宙万物终生处于群体引力制约之中,它们因此也获得了相应的惯性.本文立足于上述的宇宙空间,借助宇宙学原理、马赫原理和爱因斯坦等效原理,提出了物质客体的惯性机制和被称为虚力的惯性力机制 同时本文也解读所有惯...     

23NiCo钢的氢脆敏感性研究

采用电解充氢和三点慢弯曲试验方法研究了２３ＮｉＣｏ钢的淬火态以及２００℃、４５０℃、４８２℃和６００℃回火处理的试样的氢脆敏感性。结果表明，２３ＮｉＣｏ钢的氢脆抗力与组织中奥氏体的形态、分布有关。４８２℃回火，在马氏体板条边界形成薄膜状的逆转奥氏体，钢的氢脆抗力有大幅度的提高。此时，延长充氢时间（４～１０ｈ）对断裂行为没有影响。     

Ni18%和0Cr15Ni5Cu2Ti异种钢材电子束焊接工艺试验研究

对Ni18%和0Cr15Ni5Cu2Ti超高强度马氏体沉淀硬化不锈钢异种钢材之间进行了电子束焊接工艺试验,就其工艺可焊性及接头性能、金相组织、焊缝质量、力学性能等开展研究,采用X-探伤、静载强度、金相观察、电镜扫描和能谱分析等检测手段对试件进行了分析并得出了相应结论。