Effect of curing condition on bonding quality of scarf-repaired composite laminates

Both single-face vacuum bag curing (SVC) and double-face vacuum bag curing (DVC) can be used in scarf repair of composite structures. But different curing conditions caused by the sealing state may affect the bonding quality of scarf-repaired structures. In this paper, the effect of curing condition on bonding quality of scarf-repaired laminates was experimentally investigated in terms of surface profiles, moisture absorption curves and section profiles. In order to further explore the moisture absorption mechanism, finite element model of the repaired laminates using DVC was established with moisture diffusion of both the adhesive and composite laminates considered. This model was verified by experimental results. Based on the model of DVC case, the model of SVC case was built by changing moisture absorption parameters of the adhesive. Results show that SVC reduces the bonding quality, mainly reflecting in more adhesive inner voids and patch-to-parent dislocation. And SVC increases moisture absorption rate and moisture equilibrium content of the adhesive, and its effect on the former is far greater than that on the latter.     

基于改进准则法的复合壳阻尼结构拓扑减振动力学优化

针对复合壳阻尼结构的拓扑减振优化问题，以约束阻尼层的有限单元为设计变量，采用体积比、模态频率和振型为优化约束条件，构建以多模态权重系数的结构模态损耗因子数值关系为优化目标函数的拓扑减振优化模型。为了拓展优化目标灵敏度具有不局限于某一变密度法插值模型的形式，推导了数值表达式的一般函数式。动力学优化中优化目标灵敏度正、负数集共存，使得非凸性的目标函数设计变量出现负值或优化函数寻优于局部极值点。为此，推导出复合壳阻尼结构的全域灵敏度改进优化准则法迭代格，以确保每次迭代域均为全域设计变量集。结合有限单元法编程实现了复合壳阻尼结构改进准则法，并对复合壳结构进行拓扑减振优化分析。结果表明：在敷设体积减为全覆盖的50%时，复合壳结构的模态损耗因子增减偏差为10%，具有提升减振的轻量化设计目的；各阶目标函数和拓扑构型所需的迭代次数少，中间密度区域较小，多阶优于单阶模态优化函数，易于获得全域寻优的有效减振。     

基于ANSYS Workbench的行星滚柱丝杠动态特性分析

通过Pro/Engineer建立行星滚柱丝杠三维模型，基于ANSYS Workbench有限元分析技术进行模态与谐响应分析，得到前六阶固有频率与各阶模态振型，确定共振频率，掌握对应频率下的位移峰值响应，并研究螺母处于不同工作位置时对固有频率的影响，为基于行星滚柱丝杠传动的舵系统抗振设计提供数据支撑。     

基于等效板的含离散源损伤机翼结构分析

研究离散源损伤对机翼结构的影响,可以大幅度提高飞机在不良损伤事故下的生存能力.由于机翼内部结构复杂,很难对含离散源损伤机翼结构进行精确分析,而且精确的建模和仿真在建模与计算过程中往往也非常耗时.因此,以含离散源损伤机翼为对象,采用有限元优化设计方法,确立了一种机翼结构等效板模型的建模方法.建立的等效板模型可对含离散源损伤机翼实现快速、准确的静力学和动力学分析.     

涡轮流量计前导流件有限元计算分析

对涡轮流量计关键部件之一前导流件运用NX THERMAL/FLOW进行有限元计算分析,得出流量分离导致的大涡旋尾迹区易出现在前导流件尾部区域、前导流件叶片形状对此处流体速度变化具有较大影响的结论,为涡轮流量计和前导流件的设计提供了理论依据。     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

基于虚拟正交试验的压气机叶轮轴-毂径向微动特性研究

用Pro/E建立压气机叶轮轴-毂三维模型,利用ANSYS软件采用子结构结合网格随移技术的分析方法,建立其有限元模型。采用虚拟正交试验方法对压气机叶轮轴-毂进行仿真,得出过盈量、摩擦系数、转速对最大单位摩擦功和平均摩擦功影响显著性次序及影响规律,得到最优组合。结果表明,模拟及正交试验优化结果准确、可靠,有效地降低了摩擦磨损程度,对实际装配过程具有一定的指导作用。     

基于晶体塑性理论的疲劳裂纹起始数值模拟

在疲劳荷载作用早期,材料在晶体尺度出现裂纹的萌生,为了研究疲劳短裂纹的发展,利用Monte Carlo法建立了多晶体晶粒集合的Voronoi有限元模型,并在Ansys Usermat子程序接口下编写了晶体塑性本构方程子程序,修正了以拉伸硬化为主的疲劳裂纹起裂的计算机模拟方法,并结合TANAKA和MURA的位错偶极子模型,模拟了晶粒集合在疲劳荷载作用下的裂纹萌生,最后与文献实验数据对比,这一修正的方法更加符合实验结果和宏观现象.     

基于非结构网格的不可压N-S方程多矩有限体积法

提出了一种基于三角形及四面体非结构网格的有限体积法(FVM),用以鲁棒且精确地求解不可压粘性流动问题.与传统的FVM方法仅将体积分平均值(VIA)作为计算变量的做法不同,本文提出的方法将VIA及点值(PV)同时作为计算变量并在每个迭代步进行计算更新.VIA以通量形式进行计算以确保数值守恒,PV可以通过控制方程的不同形式进行求解更新,无需守恒,因此可以采用非常高效的方法进行求解.将PV作为增加的变量使得紧致网格模板得以实现更高阶精度的重构,而且由此获得的数值模型对于非结构网格变得更鲁棒.本文针对二维/三维的三角形/四面体非结构网格提出了数值格式,给出了几个基准测试算例,验证了本文提出的数值方法在采用非结构网格求解不可压粘性流动问题时的精确性和鲁棒性.     

Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.