Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

基于虚拟正交试验的压气机叶轮轴-毂径向微动特性研究

用Pro/E建立压气机叶轮轴-毂三维模型,利用ANSYS软件采用子结构结合网格随移技术的分析方法,建立其有限元模型。采用虚拟正交试验方法对压气机叶轮轴-毂进行仿真,得出过盈量、摩擦系数、转速对最大单位摩擦功和平均摩擦功影响显著性次序及影响规律,得到最优组合。结果表明,模拟及正交试验优化结果准确、可靠,有效地降低了摩擦磨损程度,对实际装配过程具有一定的指导作用。     

基于非结构网格的不可压N-S方程多矩有限体积法

提出了一种基于三角形及四面体非结构网格的有限体积法(FVM),用以鲁棒且精确地求解不可压粘性流动问题.与传统的FVM方法仅将体积分平均值(VIA)作为计算变量的做法不同,本文提出的方法将VIA及点值(PV)同时作为计算变量并在每个迭代步进行计算更新.VIA以通量形式进行计算以确保数值守恒,PV可以通过控制方程的不同形式进行求解更新,无需守恒,因此可以采用非常高效的方法进行求解.将PV作为增加的变量使得紧致网格模板得以实现更高阶精度的重构,而且由此获得的数值模型对于非结构网格变得更鲁棒.本文针对二维/三维的三角形/四面体非结构网格提出了数值格式,给出了几个基准测试算例,验证了本文提出的数值方法在采用非结构网格求解不可压粘性流动问题时的精确性和鲁棒性.     

Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.     

金属弹簧管性能影响因素的仿真分析

为了研究高温密封组件金属弹簧性能,本文通过对波音公司编网状弹簧管结构和Streck心脏支架结构的研究,建立了编织弹簧的几何拓扑构型和数学模型,推导了弹簧直径计算公式。采用AUTODESK3D-MAX构建了编织弹簧的仿真模型,用ANSYS仿真软件分别从编织丝直径、编织密度以及编织方法 3方面探究不同测试对弹簧性能的影响。结果表明,增加弹簧丝直径、降低弹簧管轴向方向的编织密度、提高圆周方向的编织密度、向外的弹簧管编织方式可有效提高弹簧管的回弹性能。     

日凌的计算及其对神六任务的影响分析

从信道链路上分析了日凌对卫星通信的影响,给出了日凌计算的几何模型与计算方法,并用该方法计算了神舟六号发射前后的日凌情况,分析了日凌对神舟六号发射的影响。该计算方法比较准确,并在实际观测中得到了验证。     

基于加工误差仿真的半球谐振子优化设计

针对半球谐振陀螺谐振子制造过程中存在的加工误差,采用有限元仿真,分析了半球谐振子结构参数、尺寸公差和形位公差变化对其工作模态频率和临近模态频率的影响,研究了半球谐振子形位公差变化对频率裂解和品质因数的影响。通过仿真分析可知,半球谐振子结构参数壁厚、半球中心半径及内倒角半径都会影响模态频率;半球谐振子形位公差中的内外球心距离误差对其工作模态影响较大,中心轴平行误差对频率裂解和品质因数影响较大;半球谐振子壁厚、内倒角半径、小柱半径及内外球心距离误差变化会使工作模态频率与相邻模态间存在干扰。在此基础上,提出了半球谐振子结构参数及形位公差优化设计建议,并通过半球谐振子品质因数Q值和频率裂解测量对该建议进行了验证。     

惯导系统旋转机构轴承动力学建模方法研究

旋转机构是旋转调制捷联惯导系统的关键部件之一。为了精确模拟旋转机构的动力学特性,研究了支撑旋转轴系的双列球轴承的动力学建模方法,提出了使用Bushing单元来建立同时具有径向移动刚度、轴向移动刚度和径向角刚度的三向刚度轴承动力学模型的方法。利用有限元数值仿真方法计算了三向刚度数值,并利用轴承手册上的经验公式进行了验证。在此基础上,建立了含弹性轴承支撑的旋转调制捷联惯导系统旋转机构的结构动力学有限元模型,分析比较了轴承有无角刚度两种状态下的固有模态。分析结果表明:对于旋转调制捷联惯导系统旋转机构来说,轴承模型角刚度对计算精度的影响较大,角刚度已知的模型更接近真实情况。     

增广误差模型算法在目标跟踪中的应用

针对目标机动运行过程中,滤波模型与机动状态模型失配的问题,提出了一种新的增广状态误差滤波模型。不同于现有增广方案,该模型从模型失配所致状态滤波误差的角度出发,将状态估计误差增广为一状态量,通过滤波估计后用其校正原状态量。算法分析表明,该增广滤波模型具有自适应调节多重渐消因子的等效特性,增强了对目标的跟踪能力。基于该增广状态误差滤波模型,给出了滤波算法设计并进行了仿真实验。实验结果表明,基于该模型的滤波算法在对机动目标进行跟踪时具有更强的鲁棒性。     

航空发动机多变量模糊滑模变结构模型跟踪控制

针对现代航空发动机是一个具有不确定性的强非线性系统,结合滑模变结构控制和模糊逻辑系统的优点,提出了一种模糊滑模变结构模型跟踪控制方法。采用比例积分型切换超平面设计滑模变结构控制系统,使用模糊逻辑系统自适应调节切换增益,得到某涡扇发动机的模糊滑模变结构模型跟踪控制器。数字仿真结果表明,所设计的控制器不但能使被控对象较好地跟踪参考模型,消除抖振现象,而且对系统的不确定性具有不变性,保证了被控系统在整个控制阶段都具有较强的鲁棒性。