ATM局域网仿真技术

简要介绍了 Ａ Ｔ Ｍ 局域网仿真的主要原理，以 Ｉ Ｂ Ｍ ８２６０ Ａ Ｔ Ｍ 交换机为例，具体分析了 Ａ Ｔ Ｍ 局域网仿真的实现细节。     

高校分析化学人才培养模式研究

高校是分析化学人才培养的摇篮,然而,目前高校分析化学人才培养中存在诸多问题,使得高校难以顺应时代对分析化学人才的需求。为此,分析了21世纪分析化学人才应该具备的素质,并以此为基点,探讨了目前高校分析化学人才培养的误区,提出分析化学人才培养模式的调整思路。     

多任务在轨服务模块化智能航天器技术研究

首先介绍了在轨服务技术的分类及国内外近期研究进展,结合各国已开展项目的验证情况,分析了在轨服务模式、适应多任务在轨服务航天器的发展思路。为适应卫星发射和在轨服务的任务需要,提出了多任务服务航天器的方案设想,以期降低在轨服务操作的难度,提升在轨服务系统执行多任务的能力。最后初步分析了用于演示验证任务的服务航天器总体参数及任务规划。     

提高长线传输数字波形质量的技术措施

从两方面论述数字编码波形在长线上传输的影响因素及其改善措施。通过分析并经实验表明，长线的分布电容影响通常居诸因素之首位。改进长线驱动电路，在一定程度上，可改善其传输波形之质量。另外，可利用长线传输波形的同时，还传输供总线接口电路需要的电源能量，满足总线浮空隔离的要求，有效地抑制了共模干扰。此项技术适用于远距多路串行总线的数据采集系统。     

基于现代教育技术的虚拟实验系统构建模式的研究

虚拟实验系统是现代教育技术和实践教学理论相结合的产物。通过对网上虚拟实验系统构建技术的全面分析和总结 ,将适合于高职高专院校的虚拟实验教学系统的构建模式划分为模拟演示型、系统仿真型、虚拟操作训练型和真实测量型等四种类型 ,并给出了对于高职高专院校具有重要的意义的构建方案、实现思路、适用场合和应用案例     

The evolution of mirror type magnetic fluctuations in the magnetosheath based on multipoint observations

Two orbits were selected in January–February 2006 when the separation between the Cluster spacecraft was large and mirror type magnetic field fluctuations were observed by all spacecraft in different regions of the terrestrial magnetosheath. Minimum variance analysis was applied to find the mirror type fluctuations, and the amplitude of the fluctuations was determined individually. Mirror mode structures are moving along the streamlines frozen in the plasma. A model was developed for the calculation of plasma flowtime from the bow shock to the observation point. The growth rate of the field strength perturbations was estimated by comparing the amplitudes of fluctuations observed simultaneously at distant locations (∼10,000 km) based on the assumption that δB ∼ exp(γt). The obtained growth rate values were about an order of magnitude smaller than those provided by linear models and they decreased in the inner regions of the magnetosheath, indicating some saturation in the growth of the waves when proceeding towards the magnetopause. The results of these two case studies suggest that mirror type fluctuations originate from the compression region downstream of the quasi-perpendicular bow shock, and the growth of the fluctuations cannot be described by linear approximations.     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

Sliding mode control based guidance law with impact angle constraint

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.     

三维内转式进气道对双旁进气飞行器力矩特性的影响分析

为了研究三维内转式进气道对飞行器力矩特性的影响规律,对一系列设计状态为Ma=6.5的内转式进气道展开力矩特性研究。对不同布局形式,进气形式以及基准流场中心体的内转式进气道对飞行器力矩特性的影响展开分析研究。研究结果表明,对于内转式进气道而言,有连接板的水滴型进气道双侧布局力矩特性较优,且容易满足飞行器总体需求;布局形式对进气道的力矩特性影响最显著,进气形式对侧滑力矩的影响比基准流场中心体影响更明显,而抬头力矩和滚转力矩受基准流场中心体影响更加突出;中心体在0~0.1Rs(Rs为基准流场入口半径)变化时,抬头力矩变化不大,而在0.1~0.2Rs抬头力矩变化明显。     

倒立摆系统的建模与积分滑模控制

在研究了倒立摆系统动力学模型的基础上,提出了一种积分滑模变结构的控制方法。通过设计积分性质的非线性滑模面,可以减少系统静差,提高控制精度,系统鲁棒性能获得了很好的保存。仿真证明,该方法能够在较短时间内实现系统的稳定,提高系统的控制精度,使倒立摆系统具有更高的稳定性和鲁棒性。