谈正交试验方法的简易化

正交试验法由于其直观、简单、有效,正在获得日益普遍的推广应用。然而各种书刊在正交试验的讲法上很不统一,造成人们理解上的困难,影响着正交试验法的进一步推广。本文指出正交试验法的实质是多因素试验优化法,它能以尽可能少而分布均匀的试验条件通过分批试验逐步地“搜索”到最优解,而且不论实际问题有无交互作用均能适用。文章认为国内数学界倡导的正交试验方法,在安排试验因素时不去专门分析因素间的交互作用、而对试验结果采用直观比较与分析,这是对国外正交试验方法的有效简化。正是这种简化才使正交试验法能在我国获得迅速普及与推广,成为广大群众手中的有效管理工具。     

TFM imaging of aeroengine casing ring forgings with curved surfaces using acoustic field threshold segmentation and vector coherence factor

The aeroengine casing ring forgings have complex cross-section shapes, when the conventional ultrasonic or phased array is applied to detect such curved surfaces, the inspection images always have low resolution and even artifacts due to the distortion of the wave beam. In this article, taking a type of aeroengine casing ring forging as an example, the Total Focusing Method (TFM) algorithms for curved surfaces are investigated. First, the Acoustic Field Threshold Segmentation (AFTS) algorithm is proposed to reduce background noise and data calculation. Furthermore, the Vector Coherence Factor (VCF) is adopted to improve the lateral resolution of the TFM imaging. Finally, a series of 0.8 mm diameter Side-Drilled Holes (SDHs) are machined below convex and concave surfaces of the specimen. The quantitative comparison of the detection images using the conventional TFM, AFTS-TFM, VCF-TFM, and AFTS-VCF-TFM is implemented in terms of data volume, imaging Signal-to-Noise Ratio (SNR), and defect echo width. The results show that compared with conventional TFM, the data volume of AFTS-VCF-TFM algorithm for convex and concave is decreased by 32.39% and 73.40%, respectively. Moreover, the average SNR of the AFTS-VCF-TFM is gained up to 40.0 dB, while the average 6 dB-drop echo width of defects is reduced to 0.74 mm.     

落角与视场约束制导控制一体化策略

针对考虑视场(FOV)约束和落角约束的高超声速飞行器高精度打击问题，提出一种基于自适应动态规划(ADP)的新型制导控制一体化(IGC)策略。首先设计一种融合视场角与落角约束的视场角指令，在视场角精确跟踪的同时实现精确命中并满足两种约束，从而将约束问题转化为跟踪问题；然后，借助干扰观测技术估计制导控制一体化模型中不确定性并引入到性能指标设计中，又同时将视场角约束与落角约束考虑进去，设计基于自适应动态规划的制导控制一体化方法。利用ADP的强化学习思想求解出最优控制策略，既保证高超声速飞行器的精准打击，又满足视场角约束与落角约束，而且兼顾了对不确定性的鲁棒性。仿真结果验证了本文所提方法的有效性与优势。     

用于铯光泵磁强计的无磁恒温控制系统设计

针对铯光泵磁强计对原子气室温度高稳定性及无磁干扰的要求，设计了一种用于铯光泵磁强计的无磁恒温控制系统。该系统主要包括无磁加热器件与无磁恒温控制电路。无磁加热器件采用微机电系统工艺的双层对称四线结构，可有效抑制电流产生的磁场；无磁恒温控制电路通过交流加热进一步减小恒定磁场干扰，以现场可编程门阵列为核心，使用直接数字式频率合成技术产生高频加热信号，再经功率放大进行无磁恒温控制，减少硬件电路资源。测试结果表明，气室恒温控制的温度噪声峰峰值可达到0.02 ℃，满足光泵磁强计的性能要求。     

Development and coupling test of active spacecraft potential control – Next generation (ASPOC-NG)

The active spacecraft potential control (ASPOC) system developed in the 1990s emits positive ions to neutralise the spacecraft potential, such as used in several missions like Geotail, Equator-S, Cluster, Doublestar and MMS. With the experience gained, the next generation of the active spacecraft potential control (ASPOC-NG) instrument has been developed over the last three years. Thereby, three emission technologies were tested including Liquid Metal Ion Source (LMIS), Liquid Metal Electron Source (LMES) and Solid Metal Electron Source (SMES). The development of the emitter module by FOTEC and the corresponding electronics control unit by IWF is presented. Optimisations were carried out with the focus on the reduction of mass and power consumption to comply with the requirements of future scientific missions. Coupling tests of the modules and the electronics control unit were performed including range, accuracy and lifetime tests. Both ASPOC-NG instruments for positive and negative charge compensation and their performance values show excellent results.     

启动过程压缩空气储能向心涡轮三维流动特性研究

为研究压缩空气储能系统的向心涡轮启动过程内部流动损失特性，本文采用全三维计算流体动力学（CFD）模型对其启动过程过程进行了数值模拟，与实验结果对比表明，虽然该模型在启动初始阶段与转速稳定阶段存在一定误差，但仍能够整体上反映启动过程的效率变化特征。在此基础上，进一步分析了启动过程中动叶通道内损失区及流场变化特征，结果发现，动叶进口攻角是影响内部流场主要因素：在启动初始阶段，叶轮进口攻角较大，动叶载荷集中在叶片前缘，形成明显的通道分离涡与前缘涡；在快速启动段，攻角减小，动叶载荷沿弦长分布更为均匀，通道分离涡及前缘涡逐渐减小并向叶片吸力面迁移。在整个启动阶段，动叶通道内高损失区也随着通道分离涡逐渐迁移且变小，并向相邻叶片吸力面集中。