Fe_2O_3/石墨烯复合物的制备及催化性能研究

以氧化石墨烯和硝酸铁为原料,采用水热法制备Fe_2O_3/石墨烯复合物。采用XRD、FTIR、RAMAN、SEM等对其结构和形貌进行表征,并通过不同升温速率的TG-DSC研究Fe_2O_3/石墨烯复合物对HMX热分解催化作用。结果表明,在氧化石墨烯被还原为石墨烯过程中,同时Fe_2O_3纳米粒子负载于石墨烯片层上;Fe_2O_3/石墨烯复合物可使HMX热分解活化能降低51.13 kJ·mol~(-1),对HMX有较好的催化作用。     

Fe3Al基合金拉伸和蠕变性能的改进

研究了合金化对Fe3Al力学性能的影响,结果表明加入微量的Ce对提高Fe3Al基合金室温塑性非常有效果.通过X-射线光电子能谱表层分析证明了微量Ce的加入改变了氧化物的化学组成,从而使试样表面快速钝化.用W,Ni或者Mo,尤其是W与Ni或者W与Mo复合合金化可以使Fe3Al基合金的高温强度和蠕变抗力明显提高.W、Ni或者Mo的加入会明显改善合金的微观组织,它们在合金中能够形成含有W的类似M6C碳化物形式的沉淀相.     

一种电磁性复合材料的研究

通过对Fe3O4 化学镀Ag,提高其电导率,从而获得电磁性能优异的复合材料。进行化学镀之前,
要对Fe3O4 进行包括粗化、敏化和活化等预处理。测试结果表明:Fe3O4 表面成功包覆一层Ag,厚度大约为25
~100 nm,Ag 含量达到54. 47%;Ag/ Fe3O4 的电导率σ =347. 15 S/ cm,相比Fe3O4 升高了9 个数量级,饱和磁
化强度Ms =29. 8 emu/ g。     

石墨烯/Fe3O4复合材料的制备及电磁波吸收性能

为扩展石墨烯的应用领域,对磁性功能化石墨烯的电磁波吸收性能进行研究.在氧化石墨与Fe3 O4粒子的悬浮液中添加还原剂水合肼,微波辐照反应制备石墨烯/Fe3 O4复合物.采用X射线衍射、透射电镜等手段对材料的结构和Fe3 O4的分布状态进行了测试表征.采用矢量网络分析仪测定了材料在0.1～18.0 GHz频率范围内的复介...     

粉末烧结法制备Al/Tb0.3Dy0.7Fe1.95磁致伸缩复合材料

采用粉末烧结法制备了Al/Tb0.3Dy0.7Fe1.95磁致伸缩复合材料,研究了烧结温度对烧结体的显微结构、相组成、磁致伸缩、抗压强度等性能的影响.研究结果表明,600 ℃烧结时,烧结体中仍主要存在Al与GMM合金相,烧结获得较理想的相分布状态.随着烧结温度的增加,复合体中非GMM相越来越多,原始相减少.当1200 ℃烧结时,烧结体中主要存在杂相,已几乎没有GMM相.随着烧结温度的增加,复合材料的λs和抗压强度明显下降,烧结温度为600 ℃时,烧结体的λs和抗压强度最大,分别为405×10-6和61.71MPa.其不足是,复合材料仍呈现明显的脆性特征.     

Change of Electronic Structure and Magnetic Properties with MgO and Fe Thicknesses in Fe/MgO/Fe Magnetic Tunnel Junction

The effects of the thickness of MgO and Fe on the electronic structure and magnetic properties of Fe/MgO/Fe magnetic tunnel junction was studied using the first principle method. Two series of models with MgO of different thicknesses： Fe（3）MgO（t）Fe（3） （t-=1,3,5,7） and with Fe of varied thicknesses： Fe（t）MgO（3）Fe（t） （t=3,4,5,6,7） were established. Calculated results show that in all the models the magnetic moment of Fe increases at the Fe/MgO interface and surface as compared with that of the inner layers. The mag- netic moment of each Fe layer was found to be independent of MgO thicknesses, while the spin-polarization of Fe layer at the interface shows a slight change in function of the MgO thicknesses. The tunneling magnetoresistance （TMR） ratio estimated by the Julliere model has the same change tendency as the spin-polarization has, and the largest value is obtained at the MgO thickness of 5 atomic layers. When the Fe thickness increases, the spin-polarization of interface Fe layer follows up an increase with a decrease. The highest TMR value is achieved when the Fe thickness is of 4 atomic layers.     

多用酸洗缓蚀剂DSCH-1的研究

由含氮的脂肪胺、芳香胺等多种常用的有机缓蚀剂复配制成的ＤＳＣＨ－１ 缓蚀剂，在硝酸中对２０＃ 锅炉钢和紫铜的缓蚀效率达９９．７％ ，在盐酸中对２０＃ 锅炉的钢的缓蚀效率达９８．５％ ，对紫铜的缓蚀效率也较高。Ｆｅ３＋ 离子浓度对ＤＳＣＨ－１ 缓蚀性能有较大的影响     

ICP-AES法测定纯铜中的Bi,Sb,As,Fe,Ni,Pb,Sn,Zn,Ag的方法

研究了ICP-AES法测定纯铜中的Bi,Sb,As,Fe,Ni,Pb,Sn,Zn和Ag等9个元素的分析方法.进行了基体元素铜对9个分析元素的光谱干扰研究,选择了合适的分析谱线,同时测定了分析方法的检出限.     

Effects of heavy particle irradiation and diet on object recognition memory in rats

On long-duration missions to other planets astronauts will be exposed to types and doses of radiation that are not experienced in low earth orbit. Previous research using a ground-based model for exposure to cosmic rays has shown that exposure to heavy particles, such as ⁵⁶Fe, disrupts spatial learning and memory measured using the Morris water maze. Maintaining rats on diets containing antioxidant phytochemicals for 2 weeks prior to irradiation ameliorated this deficit. The present experiments were designed to determine: (1) the generality of the particle-induced disruption of memory by examining the effects of exposure to ⁵⁶Fe particles on object recognition memory; and (2) whether maintaining rats on these antioxidant diets for 2 weeks prior to irradiation would also ameliorate any potential deficit. The results showed that exposure to low doses of ⁵⁶Fe particles does disrupt recognition memory and that maintaining rats on antioxidant diets containing blueberry and strawberry extract for only 2 weeks was effective in ameliorating the disruptive effects of irradiation. The results are discussed in terms of the mechanisms by which exposure to these particles may produce effects on neurocognitive performance.     

反应铸造TiC／NiAl（Fe）复合材料的力学行为和强化机理研究

研究了反应铸造ＴｉＣ／ＮｉＡｌ（Ｆｅ）复合材料压缩、拉伸性能和强韧化机制。ＮｉＡｌ（Ｆｅ）合金的室温拉伸延伸率达１１％。含２０％ＴｉＣ颗粒的ＮｉＡｌ（Ｆｅ）基复合材料的室温拉伸率为２．５％。与多晶ＮｉＡｌ合金及其复合材料相比,２０％ＴｉＣ／ＮｉＡｌ（Ｆｅ）复合材料的室温拉伸延伸率明显提高。原位合成的ＴｉＣ增强颗粒在高温下具有明显的增强效果,含２０％ＴｉＣ增强颗粒复合材料的高温强度比基体合金高１００％。塑性的枝晶间区域的存在是ＮｉＡｌ（Ｆｅ）及其复合材料在室温塑性得以改善的主要机制。ＸＤ＋ＲＣ工艺导致的晶粒细化作用是ＮｉＡｌ（Ｆｅ）基复合材料的主要强化机制,位错强化和弥散强化对强度也有一定贡献。