航天器共因失效分析与预防初探

简要介绍了共因失效相关概念及分析方法,通过共因失效案例分析,对航天器如何开展共因失效分析以及如何预防共因失效进行了初步探讨,提出了航天器开展共因失效分析的定性和定量方法以及预防共因失效的措施。     

Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap

A new type of aluminum lithium alloy (Al-Li alloy) Al-Li-S-4 was investigated by test in this paper. Alloy plate of 400 mm · 140 mm · 6 mm with single edge notch was made into samples bonded with Ti-6Al-4V alloy (Ti alloy) strap by FM 94 film adhesive after the surface was treated. Fatigue crack growth of samples was investigated under cyclic loading with stress ratio (R) of 0.1 and load amplitude constant. The results show that Al-Li alloy plate bonded with Ti alloy strap could retard fatigue crack propagation. Retardation effect is related with width and thickness of strap. Flaws have an observable effect on crack propagation direction.     

对某装备任务系统软件故障的研究

通过对任务系统软件故障进行定位和分析，提出了基于互斥信号量对获取数据进行现场保护及在任务管理区增加对时间的容错处理的解决措施，并对其进行了分析和验证。     

基于PIC＋FPGA飞机直流供电系统设备故障预测研究

针对飞机直流供电系统中直流设备工作情况，本文利用FPGA双进程有限状态机方法控制A／D转换器，快速准确采样多路信号。用模糊理论的建议语言规则，结合PIC单片机的控制优势，从而解决飞机直流供电系统设备故障预测报警。     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

Administrative reform of Japanese Space Policy Structures in 2012

In Japan, there are several government ministries and agencies with important roles in the development and use of space. In 2012, Japan restructured its administrative organs related to the development and use of space through legal amendments to the original acts that established these organs. Although this was an important administrative reform that took four years of planning and discussion to accomplish, this restructuring has not been communicated well outside of Japan. This study provides the first comprehensive overview of the recent legal changes in Japanese space policy. In contrast to some reports, the Ministry of Education, Culture, Sports, Science and Technology (MEXT) still has primary responsibility for the finances and personnel of the Japan Aerospace Exploration Agency (JAXA). This continues to be true even after the Cabinet Office begins its new role as the focal point for formulating Japanese space policy. It remains to be seen how the policy direction of the Cabinet Office will interact with the operational, financial, and personnel responsibilities of MEXT. I argue that knowledge of the roles of MEXT and the Cabinet Office in space policy, and the tension between the two organizations, is key to understanding Japan's future space policy decision-making process. By tracing the history of Japanese space policy since 2001, I also suggest that if bureaucrats had thought more deeply before making major reforms to space policy and its administration, there would have been less confusion over the development of national space policy this past decade. This paper concludes by identifying some key elements to monitor in the coming years of Japan's space policy.     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

多种失效模式相关的机构运动可靠度计算方法

机构运动中必然存在多种相关失效模式,多为影响机构运动的各类随机变量函数.为了在机构运动可靠性分析中有效考虑多种相关失效模式的影响,建立了考虑多种失效模式相关条件下的机构运动可靠度计算模型,并实现了对多种失效模式相关条件下的机构运动可靠度计算模型的求解,为考虑多种相关失效模式下的机构运动可靠性分析提供了一种有效途径.以6408滚动轴承为例,进行100 000抽样计算,考虑失效模式相关条件下运动可靠度为95.998 9%.该方法精度较高,具有一定的理论意义和应用价值.     

机载蒸发循环系统结构的稳健性研究

机载蒸发循环系统结构的疲劳寿命易受外界和内部环境的影响,导致无法满足设计要求。采用随机有限元法,参照设计变量和随机变量的变异性,建立机载蒸发循环系统结构疲劳寿命稳健性优化的数学模型;通过引入权因子α,将稳健性优化问题转化为结构疲劳寿命均值和标准差的双目标优化问题。结果表明:合理设置疲劳寿命均值和标准差的权因子,可有效降低设计变量和随机变量对变异的敏感性,进而提高机载蒸发循环系统结构疲劳寿命的稳健性。     

攻角传感器的热失效分析与设计方案改进

根据压差归零式攻角传感器的工作原理、结构及工作条件，结合实际经验，分析了该传感器的主要失效因素，并重点分析了热失效问题；探讨了飞行中传感器探头加热器与环境之间的热交换情况。