污水处理装置在冶金行业中的应用

对污水处理装置的技术参数、技术要求及设计方案的选择、工作原理做了进一步的阐述。对工业循环冷却水的处理有实际指导意义。     

Calculation of the transonic dip of airfoils using viscous-inviscid aerodynamic interaction method

A numerical procedure for the calculation of the transonic dip of airfoils in the time domain is presented. A viscous-inviscid aerodynamic interaction method is taken to calculate the unsteady aerodynamic loads. In the present case the integral boundary layer equations are coupled with the Transonic Small Disturbance (TSD) Potential Equation. The coupling between structural motion and aerodynamic loads is carried out using State Space equation. It is solved by State Transition Matrix technique. Results are presented for NACA 64A010 and NLR 7301 airfoils with structural data from Isogai and DLR, respectively. Comparisons show good agreement with other numerical results. Certain deviations of experimental data taken from literature need more insight in the detailed test conditions.     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

干式变压器数据采集与控制系统的设计

介绍了一种基于V/F变换的高精度干式变压器数据采集与控制系统 ,采用LM2 3 1A/F变换芯片和89C5 2单片机实现工业现场测量对象的A/D转换。V/F变换器具有高精度 ,高线形度 ,且外围电路简单的特点。采用单片机直接与V/F变换器连接进行A/D转换 ,不需要额外的硬件电路 ,充分利用硬件资源 ,精心设计软件 ,系统分辨率可达 12位 ,转换精度可达 0 .0 2 %。当传感器与上位机距离较远时 ,可以采用RS -4 85接口或无线数据发送 /接收模块实现远距离的数据通信     

TC4钛合金的微动磨损及防护

对Ｔｉ－６Ａｌ－４Ｖ合金在１８℃，１００℃２５０℃下的微动磨损特性及防护工艺进行了研究。表明：该合金微动磨损的主要磨损形式是疲劳脱层，其磨损量随温度升高而下降，高渐微动磨损量与磨损区表面所形成的氧化层的性质及厚度有关。     

航空发动机用新材料——16Cr3NiWMoVNbE齿轮钢

综合介绍了新型齿轮钢--16Cr3NiWMoVNbE钢的性能、热工艺及其在航空发动机上的应用.该钢具有淬透性高、晶粒长大倾向低等优异的综合性能,其使用温度可达350℃.该钢的研制成功,满足了我国新一代航空发动机对齿轮材料的需求.     

300M钢纯洁度磁粉检验磁痕现象的分析

采用交、直流磁粉检验并结合金相试验、电子探针试验及微量元素含量分析的方法，对３００Ｍ钢磁痕现象的本质进行了分析。结果表明，采用磁粉检验方法对航空优质钢进行纯洁度检验是可信的。     

基于MSP430汽车防抱死制动控制器的设计

介绍了一种汽车防抱死制动系统控制器的设计。控制器以MSP430F149单片机为核心,根据防抱死制动系统的工作原理,利用轮速传感器,对轮速进行滤波、放大、整形等实现车轮速度的采集。采用基于车轮滑移率的防抱控制理论,根据车速、轮速来计算车轮滑移率。在硬件设计方面,根据系统选择了MSP430F149单片机,设计出信号输入回路、输出驱动回路、电源部分,给出了系统结构原理图。     

用于棘轮变形预测的棘轮演化统一模型研究

 在大量单轴棘轮实验基础上,研究了均值、幅值、峰值和谷值应力对 304不锈钢的饱和棘轮应变的影响规律,首次提出了棘轮应力σ_r和棘轮门槛值σ_rth 的概念,建立了基于单参数控制的、用于饱和棘轮应变预测的 SRM饱和棘轮本构模型和用于独立循环应力工况下棘轮应变演化预测的 REM棘轮演化模型,并由此发展了全面描述任意循环应力工况下棘轮应变演化规律的 URM棘轮演化统一模型。抛物律模型 SRM和幂律模型 REM对实验数据拟合的相关系数均超过 0.98。URM建模容易,只需 4～ 6个试样的单轴棘轮实验数据。此外还讨论了获得 SRM本构模型的单试样实验法。     

时效处理对T-250钢电子束焊接接头组织及性能的影响

采用金相显微镜、透射电镜观察了焊后不同时效状态下T— 2 5 0马氏体时效钢电子束焊缝的微观组织 ,测试了不同时效状态下焊接接头的室温强度、夏比缺口冲击韧性、显微硬度 ,并用扫描电镜分析了拉伸断口形貌。结果表明 :随时效温度的升高 ,焊缝区枝晶间逆转奥氏体析出量增加 ,焊缝缺口冲击韧性增大 ,断口韧窝增大 ;但由于 5 0 0℃× 4h时效处理后焊缝马氏体孪晶较多而使其拉伸强度和缺口冲击韧性降低。经 4 80℃× 4h时效处理后 ,焊接接头强度具有最佳强韧性配合