Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

网络环境下高校图书馆如何加强馆藏资源建设

根据网络环境给高校图书馆献信息资源建设工作带来的挑战，从印刷型纸质献建设、电子献资源建设、网络信息资源建设、信息资源的共享共建等方面论述了高校图书馆如何加强信息资源建设。     

肼类燃料蒸汽污染控制技术

针对肼类燃料在使用中产生的蒸汽会对大气造成污染这一问题 ,介绍了肼类推进剂气体污染控制方法。这些方法主要有洗涤吸收法、气体扩散法、焚烧法、活性炭吸附法、催化法、喷雾法、冷却法、泡沫覆盖法、固体粉末消污法等。论述了国内外肼类气体污染控制的各种技术 ,并对各种技术特点进行了对比与分析     

星载铷原子频标的可靠性强化试验

针对影响星载铷原子频标可靠性的环境因素进行了分析,确定了影响星载铷原子频标可靠性的主要环境敏感应力,根据可靠性强化试验理论和星载铷原子频标的技术特点,设计了可靠性强化试验方案。依据此方案对新研制的某型星载铷原子频标工程样机实施了可靠性强化试验。试验结果表明,该方案对确定该型号铷原子频标样机工作极限、激发其潜在缺陷,均有较好的效果,从而为实现星载铷原子频标的可靠性增长提供了新的思路。同时本研究对同类高可靠航天产品的可靠性增长可提供借鉴。     

平流层飞艇的环境控制

文章叙述了平流层飞艇要经历的对流层和平流层的环境特点,对平流层飞艇的环境控制进行了分析,并提出了环境控制的几个注意问题。     

浮栅ROM器件的质子辐射效应实验研究

给出了浮栅ROM器件的质子辐射效应实验结果.认为浮栅ROM28C256和29C256的质子辐射效应不是单粒子效应,而是质子及其次级带电粒子产生的累积剂量造成的总剂量效应.器件出现错误有个质子注量阈值.对于29C256,高温加电退火容易消除质子产生的辐射损伤;对于28C256,高温加电退火不易消除质子产生的辐射损伤.动态监测和静态加电的器件都出现数据错误,且不能用编程器重新写入数据.然而不加电的器件在更高的质子注量辐照下未出现错误.对于应用浮栅ROM器件的航天器电子系统,冷备份是提高其可靠性的有效手段之一.     

振动环境质量载荷效应探究

航天飞行器有爆脱冲击环境质量载荷效应现象,类似也有振动环境质量载荷效应问题。国外一直在作这方面研究,机理不清,没有定论。本文对此加以述评,并对机理进行初步探究,这对预示振动环境及制定振动环境试验条件有重要意义.     

Numerical investigation on flow nonuniformity-induced hysteresis in scramjet isolator

Numerical simulation and theoretical analysis were conducted to study the hysteresis inside scramjet isolator during the reciprocating process of back pressure variation. It is revealed that only a regular reflection is theoretically possible for two leading shocks when the inflow Mach number is greater than 2.0, and no hysteresis can occur in the transition between shock reflection types. Nevertheless, wall suction, gas injection, and background waves cause non-uniformity of the incoming flow and would make hysteresis possible. Besides the classical hysteresis in the transition between shock reflection, new kinds of hysteresis were found in both the deflection angle of separated boundary layer and the location of the shock train. Moreover, the occurrence of hysteresis in the deflection angle of the separated boundary layer is accompanied with the shock reflection hysteresis. In the case with background waves or gas injection, hysteresis in the starting position of leading shock was observed too. As back pressure decreases, the leading shock does not follow the same path as that as the back pressure increases, and it is anchored at the location where the background shock or the injection interacts with the leading shock. It is inferred that, if two strong adverse pressure gradient regions move towards and interact with each other, hysteresis will take place when they start to separate.     

Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.