可制造性设计在系统工程过程中的应用研究

本文针对复杂产品协同设计、开发与验证过程中的可制造性共性问题,以航空电子系统为典型的复杂系统对象,探讨了可制造性的概念内涵、工作边界、组织架构和开展时机,着重从系统设计和开发策划、系统需求捕获与定义、系统架构定义、系统详细设计与实现和系统验证子过程的角度,详细阐释了可制造性设计融入系统工程过程的实施思路,并结合具体的应用实例,对可制造性设计对产品高质量交付的正向影响进行了阐释,为可制造性工作在系统开发与设计中的落地推广指明了方向、奠定了基础。     

部署retro-GEO巡视器的月球借力飞行轨道分析

retro-GEO是指逆行(retrograde)地球静止轨道(geostationary Earth orbit,GEO),该轨道与GEO轨道高度相同或相近,但倾角为180°,安装在retro-GEO卫星上的巡视器可每12 h对GEO带空间资产附近碎片环境安全预警.直接西向发射retro-GEO卫星存在地面测控和发射...     

Method of virtual trajectories for the design of gravity assisted missions

A method of virtual trajectories is proposed for the design of multiple gravity assist trajectories. The method comprises two principal stages. First, for a chosen planetary sequence, a database of virtual trajectories is tabulated. Then the database screening and refinement are performed. The design of trajectory to Jupiter is presented.     

试验数据管理系统的需求与实现

现在的工程试验产生大量的试验数据,而这些试验数据在储存和使用中存在着大量的问题。试验数据管理系统(TDM)通过梳理和优化试验流程,可以提高试验数据的利用率。     

高职模具专业学生塑料模CAD辅助设计能力的培养

运用CAD辅助设计塑料模具,是现代模具设计员必须具备的技能之一。针对许多高职模具专业毕业生该项技能薄弱的现象,分析在培养学生该项能力过程中所存在的问题,提出提高学生塑料模CAD设计能力的具体措施。     

共形光学系统设计研究

共形光学整流罩在保证了光学指标的前提下,与后端的其他结构外形轮廓平滑连接,从而提高了飞行器空气动力学的性能,在航空航天领域具有重要的应用价值。然而,采用特殊面型的整流罩给共形光学系统的像差校正以及加工、检测方面带来了极大的挑战。本文首先分析了共形整流罩像差特性,并在此基础上介绍了两种典型的光学设计。     

相变光盘多层膜系结构的最佳光匹配研究

论述了相变光盘最佳膜系结构的设计。采用导纳矩阵法计算膜系的能量反射率，用量优化计算方法编程计算，提出了第二大极值解作为在工艺上可行的实用光盘的膜系结构，并按这种膜系结构制作样品，其擦写循环数达１００万次上。     

XB14型精密石英谐振器的研制

XB14型精密石英谐振器是为现代通信、导航和航天飞行器工程系统及地面高稳晶振研制的一种小型晶体频率控制元件。该谐振器采用了硬玻璃扁平壳和高频感应真空封接技术,具有体积小、密封性好、无封接污染,高可靠和低老等特点,它的频率范围在5～250MHz,老化率在10~(-8)～10~(-9)/d量级。     

烧生活垃圾流化燃烧炉方案设计

本文设计了一台日处理量２ｔ／ｄ的烧垃圾的漩流化床焚烧炉模化装置，并进行了相应的热力计算，此装置可作为研究燃烧低热闰圾的重要设备。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.