基于运动形态学的掠地飞行器视频检测方法

 结合数学形态学、视频图像运动分析以及数学统计分析方法,提出了一种用于空中预警控制系统(AWACS)的小型掠地飞行器运动形态学视频检测方法。该方法首先应用形态学tophat滤波提取出视频图像中的可疑目标(SO),并求取SO的运动参数,利用真实目标和类目标干扰的不同运动特性,应用数学统计的方法对各运动参数进行分析以剔除部分类目标干扰,从而获得潜在目标(PT)的灰度分布和运动参数。在应用形态学tophat滤波器进行可疑目标提取中,一种新的金字塔型结构元的引入有效减少了虚警数量。外场试验表明,该检测方法能够有效抑制航拍掠地飞行器视频图像中的地物干扰,降低虚警目标的数量。     

基于MSC/PATRAN的飞机结构强度静力试验数据实时跟踪与处理系统开发

 在Windows环境下,以MSC/PATRAN为平台,利用平台提供的二次开发语言PCL(Patran Command Language),并结合C++语言,通过客户化、增设特定的命令和窗体等技术开发了飞机结构强度静力试验数据实时跟踪与处理系统TestDTAS（Test Data Tracking, Analyzing and Processing System）。在结构试验进行中,TestDTAS可以实时地监测结构试验件中应力和位移的变化情况,并与理论分析结果进行对比,而在试验结束后,TestDTAS可以进行试验数据回放和分析,从而将试验与理论分析有机的结合在一起,对结构静力试验和结构设计有很高的实用价值。     

基于T-S模糊系统的空天飞行器鲁棒自适应轨迹线性化控制

 基于T-S模糊系统提出了鲁棒自适应轨迹线性化控制(RATLC)方法。利用T-S模糊系统逼近未知干扰和不确定性因素,并采用Lyapunov方法设计了鲁棒自适应控制律。不论系统状态的维数和用于逼近不确定的模糊系统规则数为多少,整个系统仅有两个参数在线调整。理论分析证明了闭环系统所有信号一致最终有界。应用提出的控制方案设计了空天飞行器(ASV)飞行控制系统,并在高超声速飞行条件下进行了仿真验证,仿真结果表明了控制方案的有效性和鲁棒性。     

基于最短路径的SCI网络拓扑结构研究

 从航空电子系统的需求出发,对可扩展一致性接口(SCI)网络的拓扑结构进行了最短路径（跳数）研究。利用图论中的邻接矩阵变换方法,根据航空电子系统中SCI节点端口数的限制及SCI网络的小环组合结构的特点,对SCI推荐的网格形和蝶形两种网络进行了平均最小跳数的计算和分析,得出了SCI网络中小环方向的改变对平均最小跳数有影响的结论,并得到了该两种网络结构中平均最小跳数最少的拓扑形式。     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

Autonomous Control Reconfiguration of Aerospace Vehicle Based on Control Effectiveness Estimation

未来空天飞行器跨空天两域飞行,要求有较高的自主性以适应由故障和环境变化带来的不确定因素。针对空天飞行器的不确定性,提出了自主控制重构方案。研究了线性模型的时变控制效益的估计方法,提出并证明了效益矩阵可估计的充分条件,给出了相应的算法并证明了其收敛性和对噪声的鲁棒性;提出了基于线性规划和模糊逻辑的控制分配算法,通过冗余效应器实现了不确定条件下的自主控制重构。系统集成和仿真结果分析验证了方案和算法的有效性。     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

蛇形进气道的电磁散射特性

 对一种进口与机身保形设计的蛇形进气道在Ku波段选择入射频率15 GHz情况下进行了电磁散射特性的实验和仿真研究,取得了蛇形进气道雷达散射截面(RCS)随方位角、迎角和终端的变化规律。研究结果表明: (1)该蛇形进气道在水平极化终端为风扇时±60° RCS均值为-24.33 dB·m²,垂直极化为-19.15 dB·m²,是一种低RCS进气道;(2)运用时域有限差分法计算所得的RCS随方位角变化曲线与实验曲线趋势基本一致,±60°均值误差在4 dB以内;(3)从进气道对称面电场(Ex)分布图可以看出入射波射入进气道并在内壁面产生多次反射,从而验证了蛇形进气道的设计思想并为在内通道关键反射点涂敷吸波材料实现蛇形进气道的高隐身提供了一个可行的研究平台。     

航空发动机双转子系统的拍振分析

 在双转子航空发动机中,由于转子系统不可避免地存在不平衡量,当两个转子的转速比较接近时,发动机会出现拍振现象,拍振将引起振动强度过大问题。对双转子系统的拍振进行了研究,分析了拍振的周期性、信号强度及其反向转子特性,阐明了拍振产生的机理和特征,并采用数值仿真和试验对拍振进行了定量分析和验证。研究表明,拍振与双转子转速差和不平衡量的相位因素有关,当转速差小于工作转速的20%时,双转子系统拍振信号的强度较大。