93k集成电路测试系统校准原理及实现方法研究

介绍了93k集成电路测试系统校准原理与实现方法,讨论了校准过程中的量值传递关系;以HPP-MU为例,给出了量值传递的实现过程,并分析了93k校准原理与方法在确保量值准确、一致性上的优点。     

基于GNSS的高轨卫星定位技术研究

利用全球卫星导航系统(GNSS)进行导航定位具有全球、全天候、实时和高精度的优点,应用于高地球轨道(HEO)卫星的定位,能够提供精确的轨道和姿态确定,并且可以克服目前主要利用地面测控系统对HEO卫星进行定位的设备复杂、投资高等缺点,使得自主导航成为可能.本文对利用GNSS的高轨卫星定位相关技术进行了研究,分析了单一GNSS系统和多个GNSS组合系统的卫星可见性、动态性和几何精度因子(GDOP).通过仿真分析表明,利用组合GNSS系统并通过提高GNSS接收机灵敏度的方法,可以解决GNSS进行HEO卫星定位的相关问题,并能保证HEO卫星定位精度的要求.      

Precipitation behavior and properties of extruded 7136 aluminum alloy under different aging treatments

In this work, the mechanical properties and electrical conductivity of the extruded 7136 aluminum alloy treated by single-stage aging treatment (T6), retrogression and re-aging treatment (RRA), and multiple retrogression and re-aging treatment have been investigated by means of hardness measurements, electrical conductivity tests and tensile tests. The results have shown that the properties of the 7136 alloy such as hardness, tensile strength and electrical conductivity were sensitive to retrogression time (within 90 min). With prolonging the retrogression time, the tensile strength was enhanced first and then decreased, yet the electrical conductivity was continuously increased. The 60 min-treated alloy performed the highest tensile strength (716 MPa), whereas the 90 min-treated alloy possessed the highest electrical conductivity (33.95%IACS). Compared with the T6-treated alloy, the tensile strength and electrical conductivity were improved by 3.3% and 18.9%, respectively. The electrical conductivity showed an obvious increase with repetitious times of the RRA treatment. After 3RRA60 treatment, a good combination of tensile strength (705 MPa) and electrical conductivity (33.20%IACS) can be obtained. Compared with the T6 condition, the tensile strength and electrical conductivity were improved by 1.7% and 16.3%, respectively. The mechanism of microstructure evolution under different aging treatments has been discussed in detail.     

基于DSP和FPGA的模拟机数字多通道电路测试系统研制

采用DSP和FPGA相结合的方式,研制出一套数字电路测试系统,以FPGA仿真运行环境、DSP作为系统控制,可对模拟机多通道数字信号板进行测试,实现故障通道的检测。该系统电路结构简单,实用,具有可扩展性。     

A new global version of M(3000)F2 prediction model based on artificial neural networks

A new version of global empirical model for the ionospheric propagation factor, M(3000)F2 prediction is presented. Artificial neural network (ANN) technique was employed by considering the relevant geophysical input parameters which are known to influence the M(3000)F2 parameter. This new version is an update to the previous neural network based M(3000)F2 global model developed by Oyeyemi et al. (2007), and aims to address the inadequacy of the International Reference Ionosphere (IRI) M(3000)F2 model (the International Radio Consultative Committee (CCIR) M(3000)F2 model). The M(3000)F2 has been found to be relatively inaccurate in representing the diurnal structure of the low latitude region and the equatorial ionosphere. In particular, the existing hmF2 IRI model is unable to reproduce the sharp post-sunset drop in M(3000)F2 values, which correspond to a sharp post-sunset peak in the peak height of the F2 layer, hmF2. Data from 80 ionospheric stations globally, including a good number of stations in the low latitude region were considered for this work. M(3000)F2 hourly values from 1987 to 2008, spanning all periods of low and high solar activity were used for model development and verification process. The ability of the new model to predict the M(3000)F2 parameter especially in the low latitude and equatorial regions, which is known to be problematic for the existing IRI model is demonstrated.     

伺服加载控制器硬件在环仿真系统研究

为了测试和调试伺服加载控制器的工作性能,建立了控制器硬件在环仿真试验平台系统。该系统针对基于虚拟仪器技术设计的伺服加载控制器,用CompactRIO作为硬件仿真器,构成了参数可变的硬件仿真闭环系统。控制器运用PI控制算法进行载荷谱的加载;仿真器按照加载系统的数学模型来模拟实际加载系统的运行状态,完成了模型搭建、指令接收、动态仿真、仿真结果输出任务。最后,对系统的合理性进行了实验验证,结果表明该系统可以较好地模拟伺服加载系统的实际工作情况,可用于加载控制器性能的仿真验证。     

Effect of tube-electrode inner diameter on electrochemical discharge machining of nickel-based superalloy

Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. How-ever, the high machining requirement of a large number of film cooling holes can be extremely chal-lenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machin-ing process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined prod-ucts. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are inves-tigated. The results show that larger inner diameters could effectively improve the flushing condi-tion and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diam-eter of the tube electrode.     

多随机变量的桁架结构系统的可靠性分析及优化设计

针对桁架结构系统，采用随机有限元法（SFEM）计算结构系统的响应量，考虑内力重新分配，建立失效模式的安全余量方程，用验算点法计算失效模式安全余量的可靠性指标，用改进的分枝限界法，寻找主要失效模式，通过对主要失效模式方程线性化研究，计算失效模式安全余量之间的相关系数，寻找主要失效模式，通过对主要失效模式方程线性化研究，计算失效模式安全余量之间的相关系数，最后用PNET法计算出结构系统的失效概率，同时给出多随机变量的结构系统可靠度的敏度表达式，采用最佳矢量法，求解了大型桁架结构系统基于可靠性指标约束下的最小重量的优化设计问题，最后，给出了实际算例，计算结果表明；采用随机有限元法能更好地考虑结构系统的多个随机变量对系统可靠性产生的影响；所采用的可靠性分析方法和优化方法是有效的。     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

集团化实验室信息管理系统中台建设实践

中台通过重新构建企业级的服务能力,消除企业内部各业务部门、各分子公司间的壁垒,可更好的适应企业发展。描述了当前中台发展现状,结合集团化计量检测机构特点,提出了实验室信息管理系统中台的一种划分方法,为集团化实验室信息管理系统建设提供一种解决方案。实现企业业务、资源、财务的综合管理,提升企业管理能力。