解析计算在月球中继卫星Halo轨道设计中的应用

面向月球中继卫星工程轨道设计需求,研究解析计算方法在地月系L2点halo轨道设计中的应用问题。在讨论圆型限制性三体问题三阶解析近似计算方法的基础上,分析了解析计算与数值计算的差异,给出了解析近似计算在工程约束下的适用范围,进而提出了基于解析计算的轨道设计和特征筛选方法。分别采用解析初值和数值初值进行halo轨道外推,比对验证采用解析计算设计轨道的可行性。研究结果表明,解析计算方法适用于月球中继卫星轨道的初步设计、特征分析和构型筛选。     

Heliotropic dust rings for Earth climate engineering

This paper examines the concept of a Sun-pointing elliptical Earth ring comprised of dust grains to offset global warming. A new family of non-Keplerian periodic orbits, under the effects of solar radiation pressure and the Earth’s J₂ oblateness perturbation, is used to increase the lifetime of the passive cloud of particles and, thus, increase the efficiency of this geoengineering strategy. An analytical model is used to predict the orbit evolution of the dust ring due to solar-radiation pressure and the J₂ effect. The attenuation of the solar radiation can then be calculated from the ring model. In comparison to circular orbits, eccentric orbits yield a more stable environment for small grain sizes and therefore achieve higher efficiencies when the orbit decay of the material is considered. Moreover, the novel orbital dynamics experienced by high area-to-mass ratio objects, influenced by solar radiation pressure and the J₂ effect, ensure the ring will maintain a permanent heliotropic shape, with dust spending the largest portion of time on the Sun facing side of the orbit. It is envisaged that small dust grains can be released from a circular generator orbit with an initial impulse to enter an eccentric orbit with Sun-facing apogee. Finally, a lowest estimate of 1 × 10¹² kg of material is computed as the total mass required to offset the effects of global warming.     

Quality variation of GPS satellite clocks on-orbit using IGS clock products

Over 60% clocks on board of the GPS satellites are working longer than their designed life. Therefore realizing their stabilities in a long time scales is essential to GPS navigation and positioning plus IGS time scale maintaining. IGS clock products from 2001 to 2010 are used to analyze the GPS satellite clock qualities such as frequency stabilities and clock noise level. We find out that for the clocks of Block IIA satellites the frequency stabilities and clock noise are 10 times worse than that of the Block IIR and IIR-M satellites. Moreover, the linear relationships between frequency stabilities and clock residuals have been deduced with an accuracy of better than 0.02 ns. Specially, it is noticed that the clock of the PRN27 is instable and the relationship between the frequency stability and residuals is at least a quadratic curve. Therefore, we suggested that GPS satellite clocks should be weighted by their quality levels in application, and the observations of the Block IIA should not be used for real-time positioning which required precision better than one meter.     

嫦娥一号卫星撞月时刻与坐标精确分析

针对CE-1卫星精确的撞月时刻与撞月点坐标,首先通过探测器载波信号的本地相关处理技术,精确分析了载波信号在VLBI各测站的消失时刻,进而推算了卫星的撞月时刻;通过实时单向多普勒频移测量的事后分析,核实了卫星撞月过程中的飞行姿态演化;最后结合VLBI互相关时延与测距资料,经定位归算确定撞月点坐标。分析表明,CE-1卫星撞月时刻的误差为±5μs,撞月点坐标月面切向和三维定位误差分别约为0.274km和0.319km(1σ)。     

用于微小卫星自主导航控制系统地面仿真的磁强计数学模型

对基于磁强计自主导航微小卫星控制系统地面仿真的磁强计数学模型建立进行了研究。给出了地磁场理论数据的生成模型及磁强计的测量模型,并据此建立了磁强计测量数据生成的数学模型。对低轨圆轨道微小卫星的仿真计算结果表明：由该磁强计数学模型获得的磁场强度测量值与文献中真实磁强计测量数据差异很小,验证了模型的有效性和准确性。     

偏置动量卫星东西位置保持策略优化方法

针对偏王动量卫星的特点,提出了一种偏置动量卫星东西位置保持策略优化方法.根据单自由度轮控系统的控制方式、角动量管理的控制方法,以及角动量管理对卫星轨道的影响,基于动量轮转速的变化建立了推力器喷气效率、轨道元素变化量计算模型,提出了可延长东西位置保持周期的轨道控制优化策略.实际轨控任务应用结果表明方法控制效果良好.     

小卫星高分辨率成像系统

对小卫星对地观测高分辨率成像系统进行了综述。介绍了国内外有极高分辨率（0．5～1．0m）、高分辨率（1．8～2．5m）和中高分辨率（4-10m）小卫星光学成像系统的性能,并与合成孔径雷达（SAR）成像系统进行了比较。给出了小卫星光学成像系统、SAR高分辨率成像系统和卫星平台的关键技术。讨论了未来小卫星及其高分辨率成像系统技术的发展趋势。     

地球静止轨道卫星硅太阳电池在轨特性分析

空间辐照效应的影响,使太阳电池输出功率随其在轨时间的推移而逐渐衰减。文章以2颗在轨的地球静止轨道卫星为研究对象,对某类我国自主研发的硅太阳电池的在轨输出功率衰减率进行了分析。并针对所获得的相关遥测参数,通过数值统计与数学分析的方法,采用确定的计算公式得出太阳电池阵的总输出电流,用以表征其输出功率。文章提出了一种曲线平移...     

星载SAR椭圆轨道全零多普勒导引方法研究

多普勒中心频率在星载合成孔径雷达（SAR）成像中,直接影响方位向的模糊度及图像的定位精度。全零多普勒导引方法通过调整偏航角和俯仰角,使多普勒中心频率为零,但现有方法都导致残余多普勒中心频率较大。文章利用椭圆轨道下多普勒中心频率的表达式,将多普勒中心频率分为仅与俯仰角相关部分,以及与俯仰角和偏航角都相关的部分,令两部分分...     

双组元统一推进系统加注混合比改进算法及应用

卫星双组元统一推进系统加注混合比,是确定卫星氧化剂和燃烧剂加注量的重要参数。正确地确定加注混合比可以减少卫星的呆重,增加推进剂余量和卫星寿命。文章在原有混合比计算的基础上,分析了在轨不同阶段的不同压力、温度条件下10N推力器和490N变轨发动机的流量情况和入口压力、氧化剂和燃烧剂压力变化情况,利用推力器和变轨发动机地面...