PHOTOMOS继电器在ZT—1自动投放接口盒测试仪中的应用

介绍最新半导体器件ＰＨＯＴＯＭＯＳ集成继电器的特点及其在ＺＴ－１型自动投放接口盒测试仪中的应用。     

提高静压气浮陀螺加表K0、K1项精度的工艺研究

本文通过对影响静压气浮陀螺加表K0、K1项精度的因素分析,从加表及其重要组件的工作原理、结构特点、工艺过程等方面展开研究,总结出经过工艺试验及生产过程验证提高加表K0、K1项精度的关键技术,提高了加表验收合格率。     

深基坑支护技术的质量控制——以预应力锚杆和钻孔灌注桩组合为例

分析采用预应力锚杆和钻孔灌注桩组合深基坑支护技术,在施工过程中存在的缺陷类型和形成原因,指出为了确保支护结构施工质量,制订相应的改进措施,经过实践验证,表明了措施的安全性及有效性。     

北斗B1 QPSK调制信号的高灵敏度捕获算法

卫星信号在复杂环境中功率存在衰减,导致其低于接收机正常捕获范围,给信号捕获带来较大困难。在分析北斗B1频点信号体制及研究码并行捕获算法基础上,提出了针对北斗B1 QPSK调制信号的双通道并行搜索捕获算法,设计了优化的相干、非相干码并行捕获算法,解决了信噪比较低环境中北斗卫星信号捕获困难的问题。利用卫星信号模拟器产生的仿真信号对双通道并行捕获算法和相干、非相干累加捕获算法进行验证与分析,结果表明,前者性能明显优于单通道捕获,后者较普通捕获算法具有更理想的捕获灵敏度。     

Space Flight Validation of Design and Engineering of the ZDPS-1A Pico-satellite

The ZDPS-1A pico-satellites are the first satellites in China within the 1-10 kg mass range that are successfully operated on orbit. Unlike common pico-satellites, they are designed to be "larger but stronger" with more powerful platforms and unique payloads so as to bear a better promise for real applications. Through their space flight mission, the functionality and performance of the two flight models are tested on orbit and validated to be mostly normal and in consistency with design and ground tests with only several inconforming occasions. Moreover, they have worked properly on orbit for one year so far, well exceeding their life expectancy of three months. Therefore, the space flight mission has reached all its goals, and verified that the design concept and the engineering process of the picosatellites are sufficient in allowing them the desired functionality and performance in, and the adaption to the launch procedure and the low-Earth orbit space environment. In the foreseeable future, the platform together with the design concept and the engineering process of the pico-satellites are expected to be applied to more complicated real space applications.     

Deep Impact: The Anticipated Flight Data

A comprehensive observational sequence using the Deep Impact (DI) spacecraft instruments (consisting of cameras with two different focal lengths and an infrared spectrometer) will yield data that will permit characterization of the nucleus and coma of comet Tempel 1, both before and after impact by the DI Impactor. Within the constraints of the mission system, the planned data return has been optimized. A subset of the most valuable data is planned for return in near-real time to ensure that the DI mission success criteria will be met even if the spacecraft should not survive the comet’s closest approach. The remaining prime science data will be played back during the first day after the closest approach. The flight data set will include approach observations spanning the 60 days prior to encounter, pre-impact data to characterize the comet at high resolution just prior to impact, photos from the Impactor as it plunges toward the nucleus surface (including resolutions exceeding 1 m), sub-second time sampling of the impact event itself from the Flyby spacecraft, monitoring of the crater formation process and ejecta outflow for over 10 min after impact, observations of the interior of the fully formed crater at spatial resolutions down to a few meters, and high-phase lookback observations of the nucleus and coma for 60 h after closest approach. An inflight calibration data set to accurately characterize the instruments’ performance is also planned. A ground data processing pipeline is under development at Cornell University that will efficiently convert the raw flight data files into calibrated images and spectral maps as well as produce validated archival data sets for delivery to NASA’s Planetary Data System within 6 months after the Earth receipt for use by researchers world-wide.     

简析一起飞机转弯航向误差大的故障原因及预防措施

某型飞机装有两套HZX-1航向姿态系统,飞行中同时出现转弯航向误差大现象,本文通过分析故障原因,找出了引起故障的关键产品,并针对故障制定了预防措施。     

基于原位拉伸测定GTN损伤模型参数的5052铝合金成形极限应力图研究(英文)

传统成形极限图(FLD)由第一主应变与第二主应变的比值构成。但FLD依赖于成形历史和应变路径。因此,本文采用成形极限应力图(FLSD)来预测铝合金5052-O1(AA5052-O1)的成形极限。将修订的Gurson-Tvergaard-Needleman(GTN)塑性势模型用来模拟Nakazima凸模胀形实验。采用带扫描电镜(SEM)的原位拉伸试验观察记录损伤演化过程以确定GTN模型中的材料参数。通过计算AA5052-O1三个损伤阶段的孔洞分数获得GTN模型参数。根据实验结果,原生孔洞体积分数、最大形核孔洞体积分数、临界孔洞体积分数,最终断裂孔洞体积分数分别为0.002918,0.0249,0.030103,0.04854。在断裂前最后一个载荷步获得的应力应变值用来绘制AA5052-O1的FLSD和FLD。与Nakazima凸模胀形试验和单轴拉伸试验结果相比较,预测结果与试验结果较为吻合。由原位拉伸试验确定的模型参数可用于研究韧性金属的成形极限。     

Thermoelectric Properties of Mg_2Si_(1-x)Sn_x Synthesized by Bulk Mechanical Alloying

Bulk mechanical alloying (BMA) has been successfully applied to solid-state synthesis of p-type and n-type thermoelectric mate-rials Mg2Si1–xSnx (x = 0, 0.2, 0.4, 0.6, 0.8, 1) from element-powders at the room temperature in a relatively short time. The electrical conductivity, the Seebeck coefficient and the thermal conductivity of the Mg2Si1–xSnx are quite sensitive to the x-content. With the x-content rising, the electrical conductivity increases. When x = 0.6, it reaches the lowest and Mg2Si shows an n-type of semi-conducting. However, when x = 0.2 and T >525 K, the Seebeck coefficient of the samples will change the opposite way. While x≥0.4, the samples present a p-type of semi-conducting. The figure of merit, Z of Mg2Si1–xSnx will be obtained in the range from 300 K to 700 K. When x = 0.6, Z proves to be higher than that of other samples at 300 K≤T≤650 K.     

耐高温复合材料在火星探测器着陆器减速伞筒盖结构上的应用

针对火星探测器着陆巡视器减速伞筒盖结构在轨运行耐温度交变、辐照等空间环境和再入过程耐温度冲击性能需求,重点开展了筒盖复合材料耐温匹配性、力学性能、耐空间环境性能以及制件成型工艺研究。结果表明,选用J-168-1胶黏剂、J-245胶黏剂及T300/QY8911复合材料制备的试件通过各项性能试验考核,均能满足筒盖结构的设计指标要求。筒盖产品力学性能稳定,成型工艺可行性良好,最高瞬时使用温度可达200℃,经历空间环境模拟后力学性能保持率均在80%以上,耐高温、耐空间环境性良好。产品已成功装星发射,并在着陆巡视器落火阶段成功弹出分离,圆满完成使命。