大型星载可展开天线的展开动力学问题

针对大型星载可展开天线所具有的尺寸大、刚性小、展开机构复杂,所处环境恶劣等特点,结合天线的构形特征,着重从可展开天线展开动力学的建模角度,综述了可展开天线的展开动力学问题。对解决途径及办法提出了一些看法。     

带间隙空间结构的动力学特性分析

研究带间隙空间结构的动力学问题。着重讨论间隙引起的结构非线性特性,从理论上探讨了一维间隙系统的定量及定性求解方法,并通过伸展机构的试验研究,验证了间隙对结构动力学特性的影响。     

High precision and efficiency robotic milling of complex parts:Challenges,approaches and trends

Due to the advantages of large workspace, low cost and the integrated vision/force sensing, robotic milling has become an important way for machining of complex parts. In recent years,many scholars have studied the problems existing in the applications of robotic milling, and lots of results have been made in the dynamics, pose planning, deformation control etc., which provides theoretical guidance for high precision and high efficiency of robotic milling. From the perspective of complex parts r...     

Effect of scavenge port angles on flow distribution and performance of swirl-loop scavenging in 2-stroke aircraft diesel engine

Swirl-Loop Scavenging (SLS) improves the performance of 2-stroke aircraft diesel engine because the involved swirl may not only benefit the scavenging process, but also facilitate the fuel atomization and combustion. The arrangement of scavenge port angles greatly influences in-cylinder flow distribution and swirl intensity, as well as the performance of the SLS engine. However, the mechanism of the effect and visualization experiment are rarely mentioned in the literature. To further investigate the SLS, Particle Image Velocimetry (PIV) experiment and Computational Fluid Dynamics (CFD) simulation are adopted to obtain its swirl distribution characteristics, and the effect of port angles on scavenging performance is discussed based on engine fired cycle simulation. The results illustrate that Reynolds Stress Turbulence model is accurate enough for in-cylinder flow simulation. Tangential and axial velocity distribution of the flow, as well as the scavenging performance, are mainly determined by geometric scavenge port angles α_geom and β_geom. For reinforcement of scavenging on cross-sections and meridian planes, α_geom value of 27° and β_geom value of 60° are preferred, under which the scavenging efficiency reaches as high as 73.7%. Excessive swirl intensity has a negative effect on SLS performance, which should be controlled to a proper extent.     

球铰接杆式支撑臂展开过程中横向振动分析

针对展开过程中球铰接杆式支撑臂时变构型的横向振动问题,推导了支撑臂等效连续体模型的各向等效刚度,基于Hamilton原理推导了支撑臂展开过程的控制方程,采用加权余量法将偏微分控制方程转化为常微分方程,利用Runge Kutta法对方程进行了数值求解。计算结果表明：在收拢过程中,支撑臂末端的横向振幅越来越小,收拢过程是安全可靠的;而在展开过程中,末端的横向振幅随展开进程而增加,且振幅随末端负载质量增加而增加;若不考虑锁定冲击,展开速度对支撑臂横向振动的振幅影响可忽略,若考虑锁定带来的周期性冲击时,支撑臂的横向振幅将显著增大。为减小支撑臂的横向振动,必须对支撑臂展开速度加以限制。研究结果为航天器支撑臂在轨展开的控制提供了参考。     

Fractional order tension control for stable and fast tethered satellite retrieval

The retrieval of a tethered satellite system is intrinsically unstable. This paper develops a new control strategy to retrieve the tethered satellite system stably and quickly using the fractional order control theory. The governing equation of the tethered satellite system and classic linear feedback tension control law were first reviewed and examined as a benchmark. Then, a new fractional order tension control law has been to avoid the tethered satellite winds around the main satellite near the end of retrieval by existing integer order tension control laws. The newly proposed control law has been discretized and implemented by the Laplace transform and Tustin operator. Unlike the existing integer order control laws, which are based on the feedback of current state and memoryless, the fractional order control law has the memory of previous states and thus controls the tether retrieval more smoothly while maintaining the retrieving speed. The effectiveness and advantage of the new fractional order tension control law is demonstrated numerically by comparing with its integer order counterpart. The results show that the new control law not only retrieves the subsatellite without winding around the main satellite, but also provides a better control performance with smaller in-plane libration angles.     

Features of the occurrence of the additional stratification on the bottom-side F region over the equatorial location of Trivandrum

The general features of occurrence of an additional layer on the bottom side of F region, referred to as F0.5 layer in the pre noon period, over the magnetic equatorial location of Trivandrum (8.5° N; 77° E; dip lat of 0.5° N) in India during the period from 2004 to 2007 are presented using ionosonde observations. The F0.5 layer has a June (northern summer) solsticial maximum probability of occurrence with secondary maxima during December (northern winter) solstice. The seasonal as well as the day-to-day variability in the occurrence of F0.5 layer as mentioned in this paper seems to be a result of the variations in the amplitude and phases of the tides and gravity waves, and inventory of the metallic ions of meteoric origin. This study brings out an important manifestation of morning time F layer base region dynamics.     

液体火箭发动机热力组件动力学模型

 为了评判不同假设条件下得出的几种热力组件动力学模型的特点和适用范围,对其频率特性进行分析,并探讨了主要参数的影响规律。对于双组元非等温燃气流,在低频范围内采用考虑熵波效应的绝热流动模型更加精确。燃烧温度与混合比关系的无量纲斜率值越大,推进剂流量波动产生的熵波影响越明显。通过在分布参数流动模型中添加指数衰减率来表示熵波随频率的增大而耗散。改进的声学模型形式简单,既能在低频范围内描述熵波,又能在高频范围表征熵波的耗散,可以在很宽的频率范围内合理地描述燃气流动的动态特性。     

月球软着陆器动力学建模研究

建立准确、实用的月球着陆探测器动力学模型,是制导、导航和控制系统方案设计中的首要工作,文中月球软着陆探测器的推进剂贮箱采用横向对称分散布局的形式,并分析了布局方式对液体推进剂晃动的影响;将贮箱内液体考虑一阶弹簧质量模型,应用虚功率原理建立包含液体推进剂晃动的月球软着陆探测器从动力下降段至最终着陆段的动力学模型,并对动力学下降段进行了数值仿真,仿真结果可为月球软着陆探测器控制系统设计提供理论参考。     

导风轮轮罩引气对离心式压气机性能影响的数值研究

为了研究扩大离心压气机喘振裕度的实用技术 ,以解决某工程设计中的问题 ,用三维粘性计算流体力学 ( CFD)计算软件对离心压气机导风轮轮罩引气措施进行了数值模拟。该项技术在应用中所涉及的设计参数经过了初步的数值试验。从数值模拟的结果中 ,可以看到该项技术对离心压气机性能改进的明显效果