锥面活塞环锥度测量方法和不确定度评定

介绍了一种新的锥面活塞环测量方法。该方法应用光电技术解决了测量中的关键问题。本文详述了测量原理、实验系统工作原理和测量不确定度评定。     

相控馈电双反射面天线辐射特性的研究

研究了用Fourier-Bessel法和射线光学法计算、分析相控阵馈电共焦双抛物面天线辐射场的有效方法,并初步探讨了通过选择天线系统参数来尽可能减少扫描损失的途径。     

Theoretical modeling of vectoring dual synthetic jet based on regression analysis

The excellent vectoring characteristic of Dual Synthetic Jet (DSJ) provides a new control strategy for the active flow control, such as thrust vectoring control, large area cooling, separated flow control and so on. For incompressible flow, the influence relation of source variables, such as structure parameters of actuators, driving parameters and material attributes of piezoelectric vibrating diaphragm, on the vectoring DSJ and a theoretical model are established based on theoretical and regression analysis, which are all verified by numerical simulations. The two synthetic jets can be deemed as a main flow with a higher jet velocity and a disturbing flow with a lower jet velocity. The results indicate that the influence factors contain the low-pressure area formed at the exit of the disturbing flow, which could promote the vectoring deflection, and the impact effect of the disturbing flow and the suppressive effect of the main flow with the effect of restraining the vectoring deflection. The vectoring angle is a complex parameter coupled by all source variables. The detailed theoretical model, whose error is controlled within 3.6 degrees, can be used to quantitatively assess the vectoring feature of DSJ and thus to provide a guidance for designing the control law applied in the active flow control.     

固体发动机的密封问题

对固体火箭发动机密封的充分必要条件及密封界面上的应力分布进行了分析。为了提高密封的可靠性，对Ｏ形圈密封结构设计提出了若干建设性意见。     

挠性双自旋卫星的姿态稳定判据

本文建立了挠性双自旋卫星的姿态稳定性判据。挠性双自旋卫星由半刚性平台、转子以及固连于平台的挠性附件组成,选择由姿态角和模态坐标表示的系统的相对能量函数为Liapunov函数,由此建立的姿态稳定判据由两个部分组成,即忽略附件弹性运动时,半刚性双自旋卫星的姿态稳定条件和附件振动频率所应满足的条件。文中还给出了具体的应用例子。     

High-resolution simulation for rotorcraft aerodynamics in hovering and vertical descending flight using a hybrid method

A high-resolution simulation tool for rotorcraft aerodynamics is developed by coupling CFD with a Vorticity Transport Model (VTM). An Eulerian-based CFD module is used to model the blade near body flowfield, and a Lagrangian-based VTM module is employed for vortex tracking in the far wake. The coupling procedure is implemented by transmitting vortex sources to the VTM module and feeding boundary conditions back to the CFD module. The presented CFD/VTM hybrid solver is firstly validated by hover cases of three different rotor configurations. Simulation results, including the blade surface pressure distribution, rotor downwash, and hover figure of merit, exhibit favorable correlations with available experimental data. Then, a rotor operated in vertical descending flight with a fixed collective pitch is investigated. It is shown that the CFD/VTM coupling method is suitable for rotor wake simulation. Wake instabilities (far wake breakdown in hover and toroidal wake pattern in the vortex ring state) are successfully demonstrated with a moderate computational cost.     

Relative position and attitude estimation of spacecrafts based on dual quaternion for rendezvous and docking

The capacity to acquire the relative position and attitude information between the chaser and the target satellites in real time is one of the necessary prerequisites for the successful implementation of autonomous rendezvous and docking. This paper addresses a vision based relative position and attitude estimation algorithm for the final phase of spacecraft rendezvous and docking. By assuming that the images of feature points on the target satellite lie within the convex regions, the estimation of the relative position and attitude is converted into solving a convex optimization problem in which the dual quaternion method is employed to represent the rotational and translational transformation between the chaser body frame and the target body frame. Due to the point-to-region correspondence instead of the point-to-point correspondence is used, the proposed estimation algorithm shows good performance in robustness which is verified through computer simulations.     

简单实用的步进电机驱动电源

本文介绍了利用ＥＰＲＯＭ芯片构成步进电机的驱动电源，并对驱动电源及频率混同电路进行了分析和设计。     

Numerical investigation on flow field characteristics of dual synthetic cold/hot jets using POD and DMD methods

In order to improve the control ability of synthetic jets in compressible boundary layer, a novel control method based on dual synthetic cold/hot jets coupled control of velocity profile and temperature profile was proposed. As fundamental investigations on the effects of synthetic jet temperature on the jet behavior and flow field characteristics were essentially necessary, preliminary numerical simulations were conducted to study the influence of temperature (200 K and 400 K) on the flow field characteristics of synthetic jets using Large Eddy Simulations (LES) model. Time-averaged flow fields showed that different temperatures led to variable behavior of two strands of jets. For dual synthetic cold jets, a potential-core arose apparently with its height ranging from 0.01 to 0.03 m, while for dual synthetic hot jets, two strands of jets emerged downstream. The modal decomposition of instantaneous flow fields had been done using both Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD). Various modes showed different characteristics of the flow fields. As the POD method focuses on the energy of flow while the DMD method focuses on the frequency, the first two modes had many similarities, but the third and fourth modes demonstrated completely different vortex structures. The current researches play a role of preliminary investigations for further and comprehensive exploration of novel flow control measures in global velocity field.     

Three-line structured light vision system for non-cooperative satellites in proximity operations

Adapter ring is a commonly used component in non-cooperative satellites, which has high strength and is suitable to be recognized and grasped by the space manipulator. During proximity operations, this circle feature may be occluded by the robot arm or limited field of view. Moreover, the captured images may be underexposed when there is not enough illumination. To address these problems, this paper presents a structured light vision system with three line lasers and a monocular camera. The lasers project lines onto the surface of the satellite, and six break points are formed along both sides of the adapter ring. A closed-form solution for real-time pose estimation is given using these break points. Then, a virtual structured light platform is constructed to simulate synthetic images of the target satellite. Compared with the predefined camera parameters and relative positions, the proposed method is demonstrated to be more effective, especially at a close distance. Besides, a physical space verification system is set up to prove the effectiveness and robustness of our method under different light conditions. Experimental results indicate that it is a practical and effective method for the pose measurement of on-orbit tasks.