冗余铺丝机械手自运动流形分析及优化

针对传统位姿分离式铺丝机械手灵活性不足的特点,为了提高航空复合材料铺丝过程的灵活性和避障碍能力,提出一种位姿耦合式冗余铺丝机械手自运动流形的新算法。由于冗余铺丝机械手各关节之间的强耦合性增加了逆解的求解难度,该算法将冗余铺丝机械手的关节逆解分解为已知的Paden-Kahan旋量子问题以及由位置关节组成的特殊旋量子问题,并针对特殊旋量子问题进行求解得到冗余铺丝机械手全部逆解,这样相对于位姿分离式解法有效提高了冗余铺丝机械手逆解的求解效率以及求解直观性。由于冗余铺丝机械手的逆解呈现出流形的结构,所以根据冗余铺丝机械手自运动流形的多维特性,将冗余铺丝机械手的自运动流形分别映射到位置关节空间和姿态关节空间得到其三维仿真曲线。由于冗余铺丝机械手逆解流形中的优化流形在实际控制中更具应用价值,所以在铺丝机械手末端执行器沿芯模轨迹运动速度平稳的前提下为了使机械手各关节速度变化最小,提出以冗余铺丝机械手关节速度组成的约束泛函为目标得到相应的运动学优化流形,并为后续的最优控制奠定了基础。最后以某型号飞机S形进气道为例验证了所提方法的可行性。     

民机电传飞控系统故障检测与容错技术

现代民机广泛采用数字式电传飞控系统,它有利于飞机减重、飞行品质改善、飞机维护性改善等。民机电传飞控系统需满足严格的安全性与可用性要求,保证飞机取证与运营可靠性。故障检测与容错技术是实现高度安全可靠电传飞控系统的关键。该文阐述了已应用于现代民机的故障检测与容错技术,重点介绍了波音、空客公司故障检测与容错技术应用于民机设计的成功案例,对未来民机容错技术发展进行了探讨与展望。     

余度管理中输入信号的表决策略

为了提高安全可靠性及容错能力,在安全性和可靠性要求较高的系统中,通常会采用冗余设计,双余度即为一种常用的冗余策略。将对双余度计算机管理问题中的输入信号表决策略进行深入研究分析,包括三种表决算法：双通道平均值、双通道加权平均值、双通道和设备的综合,并对它们各自的特点进行了详尽的分析说明。     

Design and development of a five-axis machine tool with high accuracy,stiffness and efficiency for aero-engine casing manufacturing

In order to satisfy the machining requirements of aero-engine casing in modern aviation industry, this paper investigates three main issues during the design and development process of a five-axis machine tool with high accuracy, stiffness and efficiency, including whole structure design,key components design, and supporting stiffness design. First, an appropriate structure of five-axis machine tool is determined considering the processing characteristics of aero-engine casing. Then, a dual driv...     

空间大质量目标转位操作双臂协调控制方法

针对空间中双臂协调转位过程中面临的双臂异构、刚度不同、负载较大、测量/执行误差影响大、抓捕位置随机偏差等问题，提出了一种空间大质量目标转位操作双臂协调控制方法。首先基于双臂转位的几何约束，进行协调转位运动规划。然后，将双机械臂关节划分为主动关节和从动关节，并对主动关节设计关节位置控制器，对从动关节设计零力控制器，从动关节在转位目标的拖动力下进行跟随运动。最后，数学仿真表明了所提出的双臂协调转位方法的有效性。     

Novel roll effector based on zero-mass-flux dual synthetic jets and its flight test

The autonomous and controllable Dual Synthetic Jet Actuator (DSJA) is firstly integrated into the Unmanned Aerial Vehicle (UAV), and flight tests without the deflection of rudders are carried out to verify the viability of DSJA to control the attitudes of UAV during cruising. DSJA is improved into an actuator with two diaphragms and three cavities, which has higher energy levels. Actuators, differentially distributed on both sides of the wings, are installed on the trailing edge close to the wing tips. Flight tests, containing Differential Circulation Control (DCC) using double-side actuators, Positive Circulation Control (PCC) using left-side actuators and Negative Circulation Control (NCC) using right-side actuators, are implemented at cruising speed of 25 m/s. Results show that roll attitude control without rudders could be realized by DSJAs. DCC and NCC can generate the rightward roll and yaw angular velocity, prompting UAV to turn right. The stronger controlling ability can be achieved by DCC, with the maximum roll angular velocity of 15.62 (°)/s. PCC can generate a rightward roll moment, but a leftward yaw moment will be produced at the same time. Leftward yaw induces the leftward rolling moment, which weakens the roll control effect, making UAV keep to yaw to the left with a small slope.     

Lift enhancement based on virtual aerodynamic shape using a dual synthetic jet actuator

The Dual Synthetic Jet Actuator (DSJA) is used to develop a new type of lift enhancement device based on circulation control, and to control the flow over the two-dimensional (2D) NACA0015 airfoil. The lift enhancement device is composed of a DSJA and a rounded trailing edge (Coanda surface). The two outlets of the DSJA eject two jets (Jet 1 and Jet 2). Jet 1 ejects from the upper trailing edge, which increases the circulation of airfoil with the help of the Coanda surface. Jet 2 ejects from the lower trailing edge, which acts as a virtual flap. The Reynolds number based on the airfoil chord length and free flow velocity is 250000. The results indicate that the circulation control method based on Dual Synthetic Jet (DSJ) has good performance in lift enhancement, whose control effect is closely related to momentum coefficient and reduced frequency. With the increase of the reduced frequency, the control effect of the lift enhancement is slightly reduced. As the momentum coefficient increases, the control effect becomes better. When the angle of attack is greater than 4°, the increments of lift coefficients under the control of DSJ are larger than those under the control of the steady blowing at a same momentum coefficient. The maximum lift augmentation efficiency can reach 47 when the momentum coefficient is 0.02, which is higher than the value in the case with steady blowing jet circulation control.     

三模冗余对SRAM型FPGA寄存器上电状态的影响分析

SRAM型FPGA容易受到空间辐射环境引起的单粒子翻转效应影响，造成软件在轨故障进而影响任务成败，因此在空间应用时普遍采用三模冗余技术进行设计加固来提高软件可靠性。使用Xilinx TMRTool工具实现SRAM型FPGA的三模冗余是目前流行的三模冗余实现方式，该方式无需额外编写代码，简化了设计师的工作。分析了Xilinx TMRTool对软件网表文件的改变流程和机理，对比了三模冗余处理前后FPGA寄存器的不同布局布线结果，分析了三模冗余工具对寄存器置位和复位的影响，给出了以SRAM型FPGA为核心控制器的产品设计建议。     

卫星双向时间频率传递研究进展

介绍了卫星双向时间频率传递的基本原理和技术演进,重点论述了基于伪码相位测量的卫星双向时间频率传递方法及其误差来源,阐述了双伪码卫星双向时频传递技术、载波相位卫星双向时频传递技术和卫星双向 日波动效应等重点研究方向的最新进展.针对制约卫星双向时间频率传递技术性能提升的主要问题,给出了相关发展思考.     

一种提高通用处理模块数据完整性的设计方法

航空电子产品中为了满足高安全等级应用的驻留需求，通用处理模块的数据完整性指标需要达到 Level A（10-9）级。基于当前元器件的可靠性和产品设计的复杂度，产品的数据完整性一般在10-3 到10-5 的水平， 无法满足产品的设计需求。本文提出了一种基于数据锁步的设计方法，该方法可用当前的软硬件资源在工程项 目中设计出满足高完整性要求的产品。