S波段准椭圆响应带通频率选择表面设计研究

频率选择表面（Frequency Selective Surface,FSS）在多个领域中具有重要应用价值。通过两层双行为谐振器的双方环FSS级联,实现具有准椭圆响应的FSS,不同于传统的巴特沃斯与切比雪夫型。仿真结果表明,FSS在S波段、通带至阻带单侧过渡带宽为350 MHz。设计结构与同通带二阶巴特沃斯滤波器相比,过渡带减小了30%,与三阶巴特沃斯滤波器过渡性能一致。全波仿真结果表明,设计结构工作在S频段,实现了准椭圆响应,并具有良好极化稳定性与角度稳定性。     

双钴-1推进剂粘弹力学性能的实验研究

本文利用DDV-Ⅲ-EA动态粘弹谱仪,对双钴-1固体推进剂的动态粘弹力学性能进行了实验测定.通过频-温(时-温)等效原理,动-静态粘弹力学特性间的关系,经过计算机分析处理给出了复模量E(ωα_T)和应力松弛模量E(t/α_T)主曲线及其数学表达式.其如果对固体火箭发动机装药结构完整性分析计算有实用意义.     

Improved robust Kalman filter for state model errors in GNSS-PPP/MEMS-IMU double state integrated navigation

The integration of Global Navigation Satellite System (GNSS) with Inertial Navigation Systems (INS) has been actively researched and widely applied as it can provide reliable positioning information continuously. In recent years, Micro Electro Mechanical Systems (MEMS) technology achieves rapid development and Micro Electro Mechanical Systems and Inertial Measurement Unit (MEMS-IMU) has aroused wide concern due to its excellent properties in some cases. However, the observations from MEMS-IMU are easy to be influenced by motion state and location environment because of its manufacturing process. It is not easy to judge whether gross errors are in the state model or the observation model by the widely adopted robust filter based on innovation. In this contribution, we present an improved robust filter with a double state model on the basis of the chi-square distribution of the square of the Mahalanobis distance. The vehicle motion model acts as the external constraint information and can be adopted to construct robust statistic with the results from INS mechanization. And then a robust factor was determined to adjust the observation noise covariance matrix. To evaluate the performance of this method, the simulation test and the field test based on locomotive platform of Nottingham Geospatial Institute (NGI) were carried out. According to the results, in the simulation test, the position improvements are 33%, 30% in the north and east directions; in the real test, the loosely and tightly coupled was adopted and the position accuracy can be improved by about 50–60% in the horizontal direction and the improvement of the pitch and the roll accuracy was lower than the azimuth accuracy due to poor observability and experimental scene which is of the characteristics of small elevation change. Therefore, the proposed robust filter could diminish the effect of the gross error from MEMS-IMU and enhance the integrated system.     

Shocklike soliton because of an impinge of protons and electrons solar particles with Venus ionosphere

This paper introduces an investigation of shocklike soliton or small amplitude Double Layers (DLs) in a collisionless plasma, consisting of positive and negative ions, nonthermal electrons, as well as solar wind streaming protons and electrons. Gardner equation is derived and its shocklike soliton solution is obtained. The model is employed to recognize a possible nonlinear wave at Venus ionosphere. The results indicate that the number densities and velocities of the streaming particles play crucial role to determine the polarity and characteristic features (amplitude and width) of the shocklike soliton waves. An electron streaming speed modifies a negative shocklike wave profile, while an ion streaming speed modulates a positive shocklike wave characteristic.     

在轨服务飞行器自动寻的段的接近策略分析

在轨服务飞行器在自主式在轨服务系统中发挥重要作用,实现在轨服务飞行器与目标服务对象间的交会是在轨服务任务过程的必要阶段。为优化交会过程自动寻的段的接近策略,对基于Hill方程的双冲量机动策略进行了分析,讨论了在轨服务飞行器的初始轨道参数和机动时间选择对接近过程的影响。运用典型算例,得出两航天器的轨迹、速度和机动消耗在不同坐标系的变化规律,指出了算例中机动消耗随在轨服务飞行器初始参数变化的特点。     

TC16钛合金六角自锁螺母加工技术研究

TC16钛合金六角自锁螺母是飞机结构中一种先进的连接件,具有质量轻、强度高、耐腐蚀、抗振动等特点,大量应用于新型飞机中。本文在TC16钛合金自锁螺母加工技术研究中,解决了热处理加工技术,热处理污染去除技术,缩紧工艺技术,性能试验技术,完成了工艺路线设计,收口尺寸的确定等加工技术关键,全面掌握钛合金六角自锁螺母加工技术。     

双补燃室固冲凝聚相颗粒分布对比试验研究

针对固冲发动机燃烧效率较低以及凝相粒子分布规律不清楚的现状,本文建立了一套评价固冲发动机燃烧效率的双补燃室试验装置和研究凝相颗粒分布的取样装置。对比研究了结构相同的补燃室内的参数,其误差小于0.5%,说明该装置可以用于精确对比不同补燃室的燃烧效率。然后应用该装置完成了补燃室长度分别为600mm、800mm、1000mm,进气角度分别为30°、45°、60°的对比试验,分析了粒子的粒度分布规律和化学成分变化规律,该规律与数值分析的规律相同。试验结果表明：在进气角度不变情况下,补燃室长度增加有利于提高燃烧效率,燃烧室压强提高,凝相粒子直径明显减小,B粒子燃烧更充分;在补燃室长度为1000mm的情况下,进气角度增加有利于燃烧效率增加,燃烧室压强提高,粒子直径减小,B粒子燃烧更充分。双补燃室发动机是评价补燃室燃烧效率的有效装置,粒度分布和燃烧产物的化学成分有助于补燃室结构设计。     

导航卫星系统总体研究及星座改进方案仿真

我国的双星导航定位系统是我国第一代卫星导航定位系统,采用“有源 应答”的定位机制,用于中、低动态用户的区域导航定位,与国外卫星导航定位系 统相比有自己的长处和不足。为满足对高速运动的精确制导武器导航定位的需 要,本文提出了一种星座改进方案,并进行了仿真研究。仿真结果显示此方案可 以满足在我国及周边地区导航定位的精度要求。     

三种钻头钻削CFRP的制孔损伤对比

采用二刃双锋角钻头、三刃双锋角钻头和圆弧形钻头在不同加工参数下钻削CFRP,对比分析了孔入出口质量(入口损伤、毛刺和出口撕裂),并采用毛刺存在角度来衡量毛刺的多少。结果表明:随着进给量的增大毛刺存在的角度(范围)α先减小后增大;综合考虑孔入口和出口质量(毛刺和撕裂因子),三刃双锋角钻头最适合钻CFRP。     

固体推进剂火箭发动机贮存性能规律研究

依据固体推进剂火箭发动机大量试验数据的统计规律，提出了估算固体推进剂火箭发动机主要参量随贮存年限、温度变化而改变的数学关系式：R^1=KRR0(1 a)^△t-1，并通过了反算、验证试验和实际中的应用。