一种航天器单脉冲差模角跟踪系统的标定及测试方法

介绍了航天器单脉冲差模角跟踪系统的组成和基本原理;针对捕获跟踪系统性能与射频通道相位特性的相关性,提出了在无线状态下通过用户目标在一定范围内按一定轨迹运动进行射频通道相位标定及跟踪性能测试的方法;在此基础上进一步提出了利用信号源模拟用户目标在角跟踪系统天线坐标系下不同位置时天线输出的射频信号,进行有线状态下射频通道性能的测试方法。标定及测试方法通过地面试验验证了可行性和有效性,可用于航天器单脉冲差模角跟踪系统在地面的通道相位标定、跟踪性能测试和射频通道性能测试,以实现角跟踪系统对用户目标高精度、稳定的跟踪。     

Aerodynamic design of tractor propeller for high-performance distributed electric propulsion aircraft

Aiming to maximize the aerodynamic performance of the Distributed Electric Propulsion (DEP) aircraft, a hybrid design framework which focuses on the aerodynamic performance of the propeller/wing integration has been developed and validated numerically. Variable-fidelity modelling for propeller aerodynamics has been used to achieve computational efficiency with reasonable accuracy. By optimizing the aerodynamic loading distributions on the tractor propeller disk, the induced slipstream is redistributed into a form that is beneficial for the wing downstream, based on which the propeller blade geometry is generated through a rapid inversed design procedure. As compared with the Minimum Induced Loss (MIL) propeller at a specified thrust level, significant improvements of both the lift-to-drag ratio of the wing and the propeller/wing integrated aerodynamic efficiency is achieved, which shows great promise to deliver aerodynamic benefits for the wing within the propeller slipstream without any additional devices.     

再入航天器表面亚波长等离子体薄层对微波信号影响效应研究

为了建立电磁波在亚波长等离子体薄层中传播的物理数学模型,并针对通信频段的电磁波,研究电磁波在再入航天器表面等离子体薄层中的透射问题,相关研究成果可为再入航天器通信“黑障”现象研究提供理论基础。模型从麦克斯韦方程组出发,采用微分薄层法进行数值求解,获得了不同等离子体密度条件下亚波长等离子体中目标电磁波的透射特性及传播规律,揭示了截止反射效应和碰撞吸收效应在其中发挥的作用。本研究对于深入了解亚波长碰撞等离子体薄层中电磁波的传播过程具有意义。     

基于观测器的平台无陀螺姿态复合控制

针对超静卫星星体平台无陀螺、载荷敏感器与星体平台执行机构非共基准安装时整星存在姿态异位控制问题,提出了一种基于观测器估计星体平台姿态的复合控制方法。首先,建立星体平台/Stewart平台/载荷的动力学模型,并获得Stewart平台作动器关节空间的等效动力学模型。针对关节空间等效模型,设计super twisting观测器,以作动器平动位移为输入,以载荷和星体平台之间的相对姿态和角速度为输出,实现星体平台姿态和角速度估计。其次,以载荷测量姿态信息为输入,设计Stewart作动器的积分滑模控制律,实现载荷高精度指向控制。以观测器估计的星体平台姿态信息为输入,设计星体平台控制器实现星体平台的稳定控制。Lyapunov稳定性分析表明所设计的观测器和控制器能够保证闭环系统渐近稳定。数学仿真结果表明：在星体平台有陀螺时,载荷能够实现0.1″指向精度;在星体平台无陀螺时,采用观测器估计星体平台姿态并进行控制,载荷亦可实现0.1″指向精度。     

Methods of spacecraft impulsive relative hovering and trajectory safety analysis

Based on the analytical solutions of T-H equations and its state transition matrix form,the open-loop control method of spacecraft impulsive relative hovering was studied,which is promising for practical engineering use.The true anomaly intervals of the hovering impulse were optimized by the nonlinear mathematical programming.Based on the calculation of collision probability,the method of safety analysis and risk management was proposed.The numerical simulations show that the introduced relative hovering method can be used for circular and elliptical reference orbits hovering.Furthermore,the local optimal solution can be obtained by applying the true anomaly intervals optimization method.The maximum collision probability and the minimum relative distance nearly appear at the same time.And,the smaller the relative distance is,the larger the collision probability.     

基于并联贮箱结构的卫星推进剂剩余量测量方法

星上推进系统推进剂剩余量测量是卫星在轨管理的重要工作,事关卫星剩余寿命估计和离轨时机的选择,对于提高卫星效率具有重大的意义．中国现有的推进剂剩余量计算方法只适用于传统的双贮箱结构,不适用于桁架式卫星平台的多贮箱并联结构,为此必须开发新的计算方法,同时提高计算精度．比较多种推进剂剩余量测量方法,重点论述两种可用于并联贮箱结构的测量方法．     

带多个充液储箱航天器的耦合动力学建模方法

研究了充液航天器储箱内液体晃动与全星姿态运动的耦合动力学建模方法．分别基于单摆等效力学模型和质心面等效力学模型建立了全星姿态耦合动力学方程,并分别针对2个储箱串联布局、3个储箱并联布局的充液航天器在不同工况下的液体晃动问题进行了数值仿真研究;同时比较分析了两种储箱布局方案下液体晃动对航天器姿态运动的影响,为工程应用提供参考．     

Monocular Vision-based Two-stage Iterative Algorithm for Relative Position and Attitude Estimation of Docking Spacecraft

Visual sensors are used to measure the relative state of the chaser spacecraft to the target spacecraft during close range rendezvous phases. This article proposes a two-stage iterative algorithm based on an inverse projection ray approach to address the relative position and attitude estimation by using feature points and monocular vision. It consists of two stages: absolute orientation and depth recovery. In the first stage, Umeyama's algorithm is used to fit the three-dimensional (3D) model set and estimate the 3D point set while in the second stage, the depths of the observed feature points are estimated. This procedure is repeated until the result converges. Moreover, the effectiveness and convergence of the proposed algorithm are verified through theoretical analysis and mathematical simulation.     

载人飞船有效载荷搭载技术及试验验证

载人飞船飞行任务中搭载的有效载荷设备质量、体积大并且安装要求苛刻,而返回舱内空间狭小且舱内环境复杂。针对这个问题,文章提出了通过改装返回舱座椅作为有效载荷搭载安放的方案。经过试验验证表明,该方案对飞船的影响很小,并且满足有效载荷设备搭载要求。     

陀螺经纬仪在大型航天产品精测中的应用

陀螺经纬仪通常是做某一方向与当地大地北向的方位角关系测量用。文章针对“天宫一号”目标飞行器精测中遇到的问题,即高空不同平台间两台设备需要姿态关系测量的需求,通过对陀螺经纬仪测量原理的研究,借助大地坐标系作为中间传递坐标系,解决了经纬仪测量因互瞄被遮挡无法建立基准镜坐标系间关系的问题。测量误差分析结果验证了这种新方法的可行性,该方法可用于大型航天产品设备安装精度的测量。