偏置动量卫星偏航姿态估计与控制研究

为改善偏置动量卫星无偏航姿态敏感器时用滚动角间接控制偏航姿态的精度,基于降维观测器设计提出了一种采用偏航角估计值直接控制偏航姿态方法。在分析收敛性的基础上,给出了降维观测器的设计,以及直接控制法的系统模型。理论分析和仿真结果表明,该法能大幅提高偏置动量卫星的姿态精度,且易于软件实现,不增加系统硬件配置。     

Building components for an outpost on the Lunar soil by means of a novel 3D printing technology

3D-printing technologies are receiving an always increasing attention in architecture, due to their potential use for direct construction of buildings and other complex structures, also of considerable dimensions, with virtually any shape. Some of these technologies rely on an agglomeration process of inert materials, e.g. sand, through a special binding liquid and this capability is of interest for the space community for its potential application to space exploration. In fact, it opens the possibility for exploiting in-situ resources for the construction of buildings in harsh spatial environments. The paper presents the results of a study aimed at assessing the concept of 3D printing technology for building habitats on the Moon using lunar soil, also called regolith. A particular patented 3D-printing technology – D-shape – has been applied, which is, among the existing rapid prototyping systems, the closest to achieving full scale construction of buildings and the physical and chemical characteristics of lunar regolith and terrestrial regolith simulants have been assessed with respect to the working principles of such technology. A novel lunar regolith simulant has also been developed, which almost exactly reproduces the characteristics of the JSC-1A simulant produced in the US. Moreover, tests in air and in vacuum have been performed to demonstrate the occurrence of the reticulation reaction with the regolith simulant. The vacuum tests also showed that evaporation or freezing of the binding liquid can be prevented through a proper injection method. The general requirements of a Moon outpost have been specified, and a preliminary design of the habitat has been developed. Based on such design, a section of the outpost wall has been selected and manufactured at full scale using the D-shape printer and regolith simulant. Test pieces have also been manufactured and their mechanical properties have been assessed.     

Status and perspectives of indirect and direct dark matter searches

In this review article the current status of particle dark matter is addressed. We discuss the main theoretical extensions of the standard model which allow to explain dark matter in terms of a (yet undiscovered) elementary particle. We then discuss the theoretical predictions for the searches of particle dark matter: direct detection in low-background underground experiments and indirect detection of neutrinos, gamma-rays and antimatter with terrestrial and space-borne detectors. Attention will be placed also on the discussion of the uncertainties, mainly of astrophysical origin, which affect the theoretical predictions. The constraints placed by these searches on the extensions of the standard models will be briefly addressed.     

基于软件锁相环的电机速度控制系统

随着电力电子、微电子技术和控制技术的发展,一些场合对电机调速系统性能的要求越来越高,而锁相调速控制在稳速精度方面有其独特的优势。文章在改进的数字锁相环基础上,提出了软件锁相环电机速度控制系统,利用高性能微处理器实现了软件锁相环。     

六自由度自跟踪天线座的系统设计

六自由度自跟踪天线座是一种新型天线座,克服了A-E及X-Y型天线座存在跟踪盲区的缺点,实现了对目标的全空域跟踪。文中介绍一种六自由度自跟踪天线座系统,并通过外场测试及对卫星的跟踪,对其性能技术指标进行测试。实测结果表明,天线座各项技术指标均达到要求,成为我国自行研制的第一套六自由度自跟踪天线座系统。     

Mars entry trajectory optimization using DOC and DCNLP

This paper addresses the issue of Mars atmospheric entry trajectory optimization by use of the desensitized optimal control (DOC) and Direct Collocation and Nonlinear Programming (DCNLP). Firstly, desensitized optimal control methodology is adopted to reduce the sensitivity of terminal state variables with respect to uncertainties and perturbations along the trajectory, in addition to optimizing the original performance index. Then, Direct Collocation (DC) method is used to transform the optimal control problem into Nonlinear Programming (NLP) problem which can be easily solved using the SNOPT software package. Monte Carlo simulations of error analysis show that the sensitivity of terminal state variables with respect to uncertainties and perturbations is significantly reduced, leading to improved entry precision.     

A fault-tolerant triple-redundant voice coil motor for direct drive valves: Design, optimization, and experiment

A direct drive actuator (DDA) with direct drive valves (DDVs) as the control device is an ideal solution for a flight actuation system. This paper presents a novel triple-redundant voice coil motor (TRVCM) used for redundant DDVs. The TRVCM features electrical/mechanical hybrid triple-redundancy by securing three stators along with three moving coils in the same frame. A permanent magnet (PM) Halbach array is employed in each redundant VCM to simplify the system structure. A back-to-back design between neighborly redundancies is adopted to decouple the magnetic flux linkage. The particle swarm optimization (PSO) method is implemented to optimize design parameters based on the analytical magnetic circuit model. The optimization objective function is defined as the acceleration capacity of the motor to achieve high dynamic performance. The optimal geometric parameters are verified with 3D magnetic field finite element analysis (FEA). A research prototype has been developed for experimental purpose. The experimental results of magnetic field density and force output show that the proposed TRVCM has great potential of applications in DDA systems.     

Maxwell气固相互作用模型对稀薄高超声速凹腔绕流流动特征和热环境的影响

针对高空航天飞机等再入飞行器表面缺陷或防热瓦缝隙导致的局部压力过高和气动加热问题,采用直接模拟Monte Carlo （DSMC）方法研究了飞行高度为80 km的稀薄流区高超声速凹腔绕流问题,考虑气固相互作用（GSI）模型对凹腔流场特征和表面压力、热流的影响。结果表明：稀薄流条件（80 km）下,GSI为完全漫反射时,在凹腔前缘分离的剪切层再次附着在后缘,在凹腔内部形成一个充满腔体的单涡结构;随着GSI从完全漫反射向镜面反射变化,气体与凹腔表面之间的切向动量交换减弱,即黏性剪切作用减弱,外部气流被卷入凹腔的程度减弱,导致涡结构不断减小直至消失,凹腔底部逐渐出现所谓的"死水区"。与完全漫反射相比,镜面反射或近镜面反射会导致凹腔上游侧面的峰值压力和峰值热流以及下游侧面的峰值压力剧烈增大,在飞行器设计中,应特别留意上述表面的压力载荷和热载荷。     

小行星探测器轨迹优化方法

对小行星探测器轨迹优化方法进行了综述。介绍了直接法中的直接打靶法、直接配点法、伪谱法、微分包含法,以及间接法两种典型的轨迹优化方法,分析了其优缺点,以及在小行星轨迹优化中的应用。介绍了智能优化算法中的遗传算法、模拟退火算法、粒子群算法和多目标进化算法,分析了其相对传统优化方法的优缺点,以及相应的改进方法。     

基于DDS的AFC系统的设计

介绍了直接数字频率合成(DDS)技术工作原理及特点,给出了基于DDS设计的自动频率控制(AFC)系统的设计,形成一种能提供稳定频率的具有宽频带跟踪范围的AFC系统,并对其进行了性能分析。