化学镀Ni-P合金涂层及其耐磨性

 对化学镀 Ni- P的硬度和耐磨性的关系进行了研究。低温长时加热可以获得高硬度 ,继续保温后其值不变。高温加热硬度达最大硬度以后保温硬度降低。不同温度处理其最大值相同 ,但耐磨性不同 ,高温处理优于低温处理。光电子能谱分析表明镀层表面富磷     

碳纳米管表面修饰的研究进展

回顾了碳纳米管表面修饰的理论与实验方法,详细介绍了碳纳米管表面修饰的新方法和最新研究进展,并对碳纳米管表面修饰技术给出了简要评价。     

直接模拟蒙特卡罗羽流模拟的两相作用模型

为了数值模拟包含气体分子和凝相颗粒的两相羽流场,使用自主开发的羽流计算软件(PWS)对两相作用模型进行研究。计算均匀气流对颗粒的加速过程,结果与理论解一致,证明气体分子对颗粒的单向作用模型合理。计算气体分子在颗粒表面的反射时,将全局坐标系转换到颗粒坐标系确定其法线,再转换到法线坐标系进行镜面反射或漫反射。将这种间接法与使用反射向量的分布函数的直接法进行了对比。对同一个气体分子在颗粒表面的反射进行1×106次数值试验,两种方法所得镜面反射的速度向量均符合空间均匀分布,漫反射的速度向量分布相互一致。使用两种方法模拟150N液体火箭发动机的两相羽流场,所得气相羽流场几乎相同,间接法计算效率较高。液滴颗粒对气流场的影响主要集中在轴线附近,与无液滴的气流场相比,有液滴时会使气流温度升高、压强增大、马赫数减小。     

柔性热敏薄膜传感器阵列工艺研究

分析了热敏薄膜传感器测量流场温度和壁面剪应力的原理,选择聚酰亚胺为衬底材料,金属镍为热敏材料,提出了一种电镀引线的柔性热敏薄膜传感器阵列结构及其制作工艺.经热敏性能测试,该柔性热敏薄膜传感器阵列结构简单,可贴附于高曲率复杂表面,实现非破坏动态流场参数测量.     

Studies of Electromagnetic Properties of MWCNTs after Electroless Plating with Co-Fe Alloy

A method of electroless plating is utilized to deposit Co-Fe alloy on the surface of multi-walled carbon nanotubes (MWCNTs), and electromagnetic parameters of MWCNTs with and without electroless plating are discussed. The MWCNTs covered by Co-Fe is a desirable light absorbent in wide wave band by utilizing electroless plating process in experiments. Field-emission scanning electron microscope (FESEM) and field-emission transmission electron microscope (FETEM) images as well as energy dispersive spectroscopy (EDS) results are presented to show the morphology, components and electromagnetic parameters of MWCNTs. Electromagnetic properties of MWCNTs are enhanced after electroless plating observed from contrast of results between MWCNTs with and without plating. In conclusion, the covering Co-Fe on the surface of MWCNTs in 2-18 GHz frequency range has better electromagnetic properties. When the material is in the 6.5 GHz electromagnetic waves, the reflection loss is up to ?10 dB, and the bandwidth more than ?4 dB is 5 GHz. The excellent electromagnetic properties make it probable for MWCNTs to be utilized as absorbent in electromagnetic shielding materials.     

Aircraft maneuverability improvement by direct lift control system application

The handling qualities of an aircraft will be improved if the Direct Lift Control (DLC) system is applied. In this paper, an attempt has been made to evaluate the influence of DLC-type system parameters on the aircraft's maneuverability and to determine the desired values of these parameters for the purpose of obtaining required values of the handling maneuverability criteria. Published papers which deal with direct lift control do not list requirements for evaluating handling qualities and maneuverability of aircraft equipped with DLC system. In this paper, three new criteria permitting the evaluation of results of employing DLC have been defined. Analysis of influence of DLC system parameters on selected known handling qualities criteria (for example CAP, C^*), as well as new DLC efficiency coefficients, have been illustrated with a numeric example of A4D “Skyhawk” fighter aircraft and PZL M-18 “Dromader” agricultural airplane control system modification.     

频响分析仪的校准方法

介绍了1250频响分析仪分析器的间接测量方法和直接测量方法,并对两种测量方法进行了分析、比较。指出了采用直接测量方法在测量时需要注意的问题。     

基于层次分析法的直扩信号安全性能评估模型

在综合直扩信号风险分析、截获方法的基础上，率先对直扩信号安全性能评估模型进行了研究，建立了基于AHP（AnalyticHierarchyProcess，层次分析法）的直扩信号安全性能评估模型，详细给出了直扩信号安全指数的计算过程，并对多种直扩信号的安全指数进行了仿真。仿真结果袁明：评估方法有效；提出的模型可以定量评价不同直扩信号的安全性能，为直扩信号的安全性设计提供定量的依据。此外，还提出了卫星测控直扩信号的安全等级分类原则和卫星安全等级要求。     

渗氮不锈钢表面镀银工艺研究

通过在不同的活化、预镀镍、除氢温度条件下对渗氮不锈钢零件上的镀银层进行高载荷试验,开展耐磨性、结合力的对比分析,总结出延长带电预镀镍时间是改善渗氮件镀银结合力的关键因素,并确定了带电预镀镍的最佳时间,对渗氮不锈钢表面镀银工艺进行了优化改进。     

BTT导弹神经网络直接逆控制算法的FPGA实现研究

针对BTT导弹控制系统中导弹模型的非线性和强耦合的特点,应用逆7系统和神经网络相结合的方法建立了导弹的逆模型.并以俯仰通道为例,设计了逆控制算法的BP神经网络结构,采用Verilog HDL编写了BP神经网络各个功能模块,并将其在FPGA上实现.通过神经网络逆控制算法在FPGA硬件实现和通用计算机上软件实现的对比,表明...