Energy conversion of the flare due to direct electric fields from the sheared reconnection

In this paper we present a new mechanism of the main energy conversion of the solar flare. Since a flare inducing prominence (flux tube) rises V_z ? 300 km s⁻¹, the plasmas below it cannot continuously eject with Alfvén speeds of V_A = 3000 km s⁻¹ but probably with V_z ≈ ±100 km s⁻¹. Plasma up and downflows with V_A will within a short duration be blocked between the chromosphere where reconnected flux tubes are piling up, and the slowly rising flux rope. Hence the Petschek slow shock mechanism is difficult to be realized as a major energy converting mechanism.     

新型工具电极制造方法

用电火花加工复杂形状模腔的关键之一是工具电极的制造。为了解决一般电极材料价高，复杂型腔难以加工等问题，通过试验研究，推出了一种以石膏和塑料为基本材料，采用非金属电镀工艺制造工具电极的新方法。     

Direct position determination using single moving rotating linear array: Noncoherent and coherent processing

To improve the resolution and accuracy of Direct Position Determination (DPD), this paper investigates the problem of positioning multiple emitters directly with a single moving Rotating Linear Array (RLA). Firstly, the geometry of the RLA is formulated and analysed. According to its geometry, the intercepted noncoherent signals in multiple interception intervals are modeled. Correspondingly, the MUltiple SIgnal Classification (MUSIC) based noncoherent DPD approach is proposed. Secondly, the synchronous coherent pulse signals are individually considered and formulated. And the coherent DPD approach which aims for localizing this special type of signal is presented by stacking all array responses at different interception intervals. Besides, we also derive the constrained Cramér-Rao Lower Bound (CRLB) expression for both noncoherent and coherent DPD with RLA under the constraint that the altitudes of the emitters are known. At last, computer simulations are included to examine the performance of the proposed approach. The results demonstrate that the localization accuracy and resolution of DPD with single moving linear array can be significantly improved by the array rotation. In addition, coherent DPD with RLA further improves the resolution and increases the maximum emitter number that can be localized compared with the noncoherent DPD with RLA.     

反舰导弹半实物仿真系统的可视化设计

介绍了在 Windows 平台上,利用 VC++6.0和 DirectX7.0等软件实现了某型反舰导弹飞行可视化仿真系统的设计,解决了如导弹飞行尾焰、导弹模型实时驱动和视点变换控制等主要问题,并对于在微机平台上以较低成本开发复杂图形仿真系统有一定的现实意义和推广价值。     

热处理温度对硬铬镀层性能的影响

研究了热处理温度对硬铬镀层性能的影响.发现经过200～300℃1*#h热处理,镀层硬度明显提高,耐磨性得到改善,但硬度和耐磨性的最优点对应不同的热处理温度.对镀层XPS分析表明,热处理过的镀层中有有机碳化物析出.对镀层的EDAX分析表明,热处理使镀层表面氧含量增高,但对镀层微裂纹数量和宽度没有明显影响.对镀层的XRD实验结果表明,热处理后镀层的晶体结构未发生改变.     

Preparation of CF/Ni-Fe/CNT/silicone layered rubber for aircraft sealing and electromagnetic interference shielding applications

To meet the needs of preventing information leakage in space engineering and military industry, an efficient method was introduced to obtain layered electromagnetic shielding sealing rubber. The carbon fiber, Ni-Fe coating, and Carbon NanoTube (CNT) were combined by chemical plating and in-situ polymerization to obtain a lightweight (0.14 g/cm²) and thin (1 mm thick) Carbon fiber Fabric (CF)/Ni-Fe/CNT/silicone layered electromagnetic shielding composites. The layered material obtained by adjusting the electroless plating time exhibited a high Shielding Efficiency (SE) of 60.2–85.5 dB in the range of 0–4800 MHz, which can be used for aviation electromagnetic shielding. Carbon fibers and carbon nanotubes mainly attenuated electromagnetic waves through absorption loss, while the nickel-iron alloy coating through reflection loss interacted with the magnetic vector of incident ElectroMagnetic (EM) radiation and magnetic dipoles, therefore, the EM Interference (EMI) shielding composite attenuated EM waves with the “absorption-reflection-absorption” cooperative interaction. Moreover, the flexible fabric substrate adhered with silicone rubber possessed a breaking elongation of 52.3%, which can be utilized as a good sealing material. Simultaneously, the outstanding exothermicity (67.2 °C under the applied voltage of 5 V) makes it possible to be applied in electric heating area. The electromagnetic shielding composites prepared in this paper have good potential in the fields of precision electronic equipment and aviation systems.     

小推力下卫星编队的非自然构型设计与控制

使用小推力控制可以得到许多独特的非自然卫星编队构型,主从星相对位置不变和从星圆形匀速绕飞构型是两类最典型的构型,建立了这两类编队构型的编队参数(主从星距离、空间方位和绕飞速度)与一天内燃料消耗的关系。进一步考虑存在初始误差时控制律的设计,指出PD控制律能够维持小初始误差编队构型,改进的PD控制律能够维持中等初始误差编队构型,而PD控制律和直接法相结合的混合控制律能够维持大初始误差编队构型,仿真结果验证了所设计控制律的有效性。     

DSSS卫星通信中窄带干扰的盲检测与消除研究

建立了干扰条件下的接收信号模型,提出了干扰抑制方案。利用信号谱包络的相似性 ,给出了基于滑动窗最小二乘的干扰盲检测方法,进而根据对消的思想消除窄带干扰。仿真 结果表明该方法能有效抑制DSSS卫星通信中常见的窄带干扰。     

静态解耦控制与常规控制的兼容性

静态解耦控制和常规控制之间的兼容性，与常规控制系统的组成和功能有密切的关系。因此，以ＹＦ－１６ＣＣＶ飞机为例，对兼容性问题进行了计算、分析和讨论。计算结果表明，采用静态补偿和闭环修正方法，不但可以实现两种控制之间的兼容，而且还可以提高静态解耦控制的准确度。     

非光滑Fuzzy多目标规划的Fuzzy有效解的Mond-weir型对偶定理

本文研究具有Fuzzy约束的非光滑Fuzzy多目标规划（FVP），利用分明多目标规划建立了（FVP）的Mond-Weir型对偶模型，得到了Fuzzy有效解的弱对偶、直接对偶和逆对偶定理。