非规则LDPC码译码量化问题研究

对应用于国家数字电视地面传输标准的非规则LDPC码的log-BP译码算法实现中的量化问题进行研究,针对三种不同的编码效率的码字,对接收数据和中间变量进行均匀和变精度量化方案设计,并在高斯信道上仿真。通过对误码率和译码硬件复杂度两方面的对比和优化,得出了标准采用的LDPC码log-BP算法量化的实用性结论,作为硬件实现及其他应用的重要依据和参考。进一步指出对中间变量采用“变精度量化”方案,可使误码率非常接近无量化处理。     

CCD遥感相机信号处理电路降噪方法

针对中国遥感高分辨率传输型相机的发展趋势,提出了一些降低信号处理电路噪声的方法;从信号完整性理论出发,利用电子设计自动化（EDA）工具Cadence软件进行了仿真与验证,并经实际电路测试验证取得了良好的效果。     

Multi-function radar emitter identification based on stochastic syntax-directed translation schema

To cope with the problem of emitter identification caused by the radar words＇ uncertainty of measured multi-function radar emitters, this paper proposes a new identification method based on stochastic syntax-directed translation schema（SSDTS）. This method, which is deduced from the syntactic modeling of multi-function radars, considers the probabilities of radar phrases appearance in different radar modes as well as the probabilities of radar word errors occurrence in different radar phrases. It concludes that the proposed method can not only correct the defective radar words by using the stochastic translation schema, but also identify the real radar phrases and working modes of measured emitters concurrently. Furthermore, a number of simulations are presented to demonstrate the identification capability and adaptability of the SSDTS algorithm.The results show that even under the condition of the defective radar words distorted by noise,the proposed algorithm can infer the phrases, work modes and types of measured emitters correctly.     

对海作战无人机指挥控制系统发展综述

首先对国外无人机指挥控制系统的发展现状、趋势进行了分析,引出我国对海作战无人机指挥控制系统产品谱系、技术领域发展路线的研究需求,还分析了我国对海作战无人机的作战需求和部署模式,得出不同形态控制站的发展思路和技术路线,同时结合美军无人机指挥控制系统核心能力发展情况,提出我国对海作战无人机指挥控制系统重点技术发展规划,为我国对海作战先进无人机指挥控制装备的研发进行探索。     

Parallel Distributed CFAR Detection Optimization Based on Genetic Algorithm with Interval Encoding

Aiming at parallel distributed constant false alarm rate (CFAR) detection employing K/N fusion rule, an optimization algorithm based on the genetic algorithm with interval encoding is proposed. N-1 local probabilities of false alarm are selected as optimization variables. And the encoding intervals for local false alarm probabilities are sequentially designed by the person-by-person optimization technique according to the constraints. By turning constrained optimization to unconstrained optimization, the problem of increasing iteration times due to the punishment technique frequently adopted in the genetic algorithm is thus overcome. Then this optimization scheme is applied to spacebased synthetic aperture radar (SAR) multi-angle collaborative detection, in which the nominal factor for each local detector is determined. The scheme is verified with simulations of cases including two, three and four independent SAR systems. Besides, detection performances with varying K and N are compared and analyzed.     

Evaluation of a Geiger-mode imaging flash lidar in the approach phase for autonomous safe landing on the Moon

The imaging flash lidar has been considered as a promising sensor for the future space missions such as autonomous safe landing, spacecraft rendezvous and docking due to its ability to provide a full 3D scene with a single or multiple laser pulses. The linear-mode flash lidar has been developed and demonstrated for an autonomous safe landing on the Moon in order to provide an accurate distance measurement to the landing site and its 3D image. Yet, the Geiger-mode flash lidar has also been recognized as an emerging technology for the space missions because it is highly sensitive even to a single photon and provides the very accurate timing of photon arrival. In this study, the performance of the Geiger-mode flash lidar is simulated in the approach phase and evaluated for the autonomous landing on the Moon. Furthermore, a new statistical signal processing algorithm is proposed to remove the noise counts in order to obtain the 3D image from a sequence of laser pulses in the situation of the fast moving spacecraft. The algorithm is shown to be effective for the autonomous landing due to its ability to remove noise events under the condition of low signal-to-noise ratio and improve ranging accuracy.     

Experimental investigation on static/dynamic characteristics of a fast-response pressure sensitive paint

An optical-based technique using Pressure-Sensitive Paint(PSP) is a promising method to measure the distribution of surface pressure on an aerodynamic model. The static and dynamic characteristics of a fast-response PSP that is developed in the Chinese Academy of Sciences(CAS)are analyzed and tested to serve as the basis for experiments on unsteady surface measurement using a fast-response PSP. Two calibration systems used for this study are set up to investigate the temperature dependency, response time, and resolution. A data processing method, used for dynamic data, is analyzed and selected carefully to determine the optimum signal. Results show that the fastresponse PSP can be used normally at temperatures from 25 ℃ to 80 ℃. The effect of temperature on the accuracy of the measurement must be considered when temperatures are beyond the temperature range of 30–40 ℃. The dynamic calibration device with a solenoid valve can achieve a pressure jump within a millisecond order. The resolution is determined by the signal-to-noise ratio of the photo-multiplier tube. Results of the measurement show that the response time of the PSP decreases with a large pressure variation, and the response time is below 0.016 s when the pressure variation is under 40 kPa.     

高能束流加工技术的应用及发展

针对高能束焊接、高能束快速成形及高能束表面加工等三个方面进行讨论,概述并归纳当前的技术现状及应用,结合现代航空技术对制造工艺提出的新要求,阐述高能束流加工技术在航空制造中的发展趋势。     

某型无人机运动学建模与分析CSCD

采用运动学建模方式对无人机进行总体设计,并通过数字风洞仿真实验对其进行验证,结果表明设计指标正确、合理。     

2m测长机光栅数显装置

介绍了在2 m测长机上安装光栅和数显装置的目的、装置的构成、主要技术指标、技术途径及其问题的解决办法,最后阐明了对其装置的技术性能考核结果和应用的实际意义。