Plastic wrinkling model and characteristics of shear enforced Ti-alloy thin-walled tubes under combination die constraints and differential temperature fields

Plastic wrinkling predictions and shear enforced wrinkling characteristics of Ti-alloy thin-walled tubes under combination die constraints have become key problems urgently in need of solutions in order to improve forming quality in their shear bending processes under differential temperature fields. To address this, a wrinkling wave function was developed by considering their shear bend deformation characteristics. Based on this wave function and the thin shell theory, an energy prediction model for this type of wrinkling was established. This model enables considera-tion of the effects of shear deformation zone ranges, material parameters, loading modes, and fric-tion coefficients between tube and dies on the minimum wrinkling energy. Tube wrinkling sensitive zones (WSZs) can be revealed by combining this wrinkling prediction model with a thermal-mechanical coupled finite element model for simulating these bending processes. The reliability of this wrinkling prediction model was verified, and an investigation into the tube wrinkling char-acteristics was carried out based on the experimental conditions. This found that the WSZs are located on either a single side or both sides of the maximum shear stress zone. When the friction coefficients between the tube and the various dies coincide, the WSZs are located on both sides. The larger the value of the tube inner corner radius and/or the smaller the value of the outer corner radius, the smaller the wrinkling probability. With an increase in the value of the moving die dis-placement, the wrinkling probability increases at first, and then decreases.     

差分流量调节推力矢量控制研究

为了了解差分流量调节实现推力矢量控制的特点,参考塞式喷管发动机XRS 2200的工作参数,对多单元直排型塞式喷管模型发动机进行了数值计算。介绍了差分流量调节的计算方法和内喷管与塞锥推力矢量变化的分析过程,计算产生的俯仰力矩。结果表明,差分流量调节时,塞式喷管轴向合力基本保持不变,不损失轴向推力性能;俯仰力矩包括轴向力和侧向力产生的两部分力矩,随差分流量调节增大而增加,有很好的偏转性能。结论可以为差分流量调节的实验研究提供参考。     

高速DQPSK解调器的算法及实现

介绍了一种高速四相差分相移键控(DQPSK)解调器的算法。该方法基于锁相环原理，并采用了现场可编程逻辑门阵列(FPGA)芯片进行载波恢复、差分解码、时钟恢复和判锁等，其设计与实现不仅方便，而且可靠性高。     

遥感相机自动调焦的研究

本文介绍一种遥感相机自动调焦技术的实验研究结果，实验表明，差分式对比传递函数法调焦，具有调焦精度高，调焦速度快，受像移影响不明显，适应性好等优点。     

差分编码OQPSK调制解调器设计

OQPSK调制性能大大优于 QPSK,但由于 OQPSK调制的特殊性 ,其差分编解码相应比较复杂 ,文中对DOQPSK的差分编解码和调制解调原理进行了深入的分析 ,针对传统 DOQPSK相干解调和解码方法存在的问题 ,给出一种简单高效的改进 DOQPSK解调和解码方法。该方法不仅结构简单 ,同时消除了与 DQPSK解调相比存在的 3 d B解调损失问题 ,大大提高系统的解调性能     

微分变压器用于宽频数字信号隔离

用微分变压器取代积分变压器实现数字信号隔离，不仅有利于箭上设备小型化，还可提高隔离性能，改善电磁兼容（ＥＭＣ）性。文中分析了积分变压器隔离电路的缺点和局限性。展宽频域下限的一种有效途径是使用微分变压器，它的工作条件易于满足，可小型化，且频率下限低至毫赫级。文中给出了计算公式和电路。为了恢复变形的波形，给出了迟滞整形电路，本方案优点是增强了抗干扰能力，提高测量精度，延长传输距离。     

差分技术在双星快速定位通信系统中的应用

卫星定位通信系统是具有10米以内高精度的第二代卫星导航定位系统。达到高精度的关键是应用了伪随机码扩谱及差分定位技术。诸如星历误差、电离层时延变化和地球模型不准等误差,通过应用差分技术可以大部分消除。本文阐述了差分技术的应用和系统精度分析。     

Transient simulation of a differential piston warm gas self-pressurization system for liquid attitude and divert propulsion system

In order to obtain the dynamic characteristics of a differential piston warm gas selfpressurization system for liquid attitude and divert propulsion system, a transient model is developed using the modular modeling method. The system includes the solid start cartridge,pressure-amplified tank with liquid monopropellant, liquid regulator, gas generator, and pipes.The one-dimensional finite-element state-variable model is applied to the pipes and the lumped parameter method is adopted for the other modules. The variations of the system operation parameters over time during the startup, steady-state, and pulsing operational processes are obtained from the transient model, and the characteristics of starting time changing with different system parameters are also analyzed. It is shown that the system startup process can be divided into three distinct processes. The starting time monotonically changes with variations of the liquid regulator parameters, first decreasing and then increasing with the mass change of the solid propellant charge of the start cartridge, initial gas cavity volume of the pressure amplified tank and initial gas cushion of the propellant tank. The starting time can be reduced to less than 1.0 s(0.68–0.75 s for the current system). For meeting the deviation requirements of ±10% of the steady-state propellant tank pressure, the positive deviation requirement is assured by the self-locking pressure and the negative deviation can be assured within an allowable maximum propellant tank volume flowrate(1.6 times the design value for the proposed system) for downstream thrusters for a designed system. The results from the simulation are useful as a guide for further system design and testing.     

Kalman filter based estimation of differential hardware biases with triangular interpolation technique for IRNSS

Ionosphere delay correction is the main error correction to the computation of single frequency user position using satellite navigation. However ionosphere delay consists of not only delay but also frequency dependent differential hardware biases from satellite and receiver ends. For ionosphere point of view, Indian Regional Navigation Satellite System (IRNSS) service area comes in equatorial anomaly region. It is a unique satellite navigation system which operates at L5 and S frequencies and consists of Geostationary Earth Orbit (GEO) and Geo Synchronous Orbit (GSO) satellite constellation. With IRNSS measurements availability, there is a good opportunity to estimate and analyse differential hardware biases with GEO/GSO combination and with equatorial ionosphere variation. In this paper, Kalman filter based estimation with triangular interpolation technique is used to estimate differential hardware biases for all IRNSS satellites and reference receivers at L5 frequency. The standard deviation of the 15?days of daily estimation of satellite differential hardware biases is in the range of 0.32 to 1.17 TECU for all IRNSS satellites. Similarly, the standard deviation of the 15?days of daily estimation varies up to 2.85 and 6.0 TECU for receiver differential hardware biases during calm and stormy period respectively. The ionosphere delay computed using estimated differential hardware biases is compared with Global Ionosphere Map (GIM) data. A rigorous analysis is carried out to study the error in the estimation in terms of input data noise level, satellite constellation and effect of latitude. Our result reveals that over IRNSS service area, there is an exponential increase in the error in the estimation of receiver differential hardware biases with respect to latitude.     

General Relativity Accuracy Test (GReAT): New configuration for the differential accelerometer

We presents the results of an activity concerning the test of the Einstein Weak Equivalence Principle with an accuracy of about 5 × 10⁻¹⁵. The experiment will be performed in an “Einstein elevator” using a differential accelerometer with a final sensitivity of about 10⁻¹⁴ g_⊕/Hz^1/2. The differential accelerometer is spun about an horizontal axis at a frequency in the range 0.5–1 Hz in order to modulate, during the free fall, the signal from a possible violation of the Equivalence Principle. In the paper the perturbing effects with the same signature of the possible violation are analyzed and constrained. The experimental results obtained in the laboratory with a first prototype of the differential accelerometer are discussed, comparing this results with those obtained using a new prototype.