三维数模随动下的机翼结构重量优化

目前,基于快速建模下的重量重心估算系统得到了快速发展。为了进一步提高结构重量估算精度,研究了如何在重量重心快速分析(WCGA)系统环境中构建优化模块。以机翼结构重量优化为例,提出优化流程,对优化模块功能进行分解,给出模型简化要求。以A320飞机机翼为例,对梁和长桁进行优化,结果显示,经过优化,有效减轻了结构重量,且相比于传统的减重优化设计方法,极大提高了计算效率。     

低成本多小天体并行交会技术

小天体资源开发方兴未艾,为降低开发风险和成本,需要发射无人探测器交会观测多个待选目标小天体。传统多目标探测方案存在无法多次交会、成本高,周期长等不足。提出的低成本多小天体并行交会技术,能够对多小天体探测任务进行解耦,实现基于微纳飞行器的低成本多目标并行交会勘查,从而降低探测成本,缩短探测周期。该技术结合行星借力与不变流形机制构建了低能量星际转移方案。然后引入扰动流形思想,使微纳飞行器能够实现与目标小天体的快速交会。进一步,提出了一种多目标小天体探测全局搜索方法,该方法基于在日地halo轨道上停泊的微纳飞行器集群,逐次确定小天体探测目标,并利用上述方法完成了多微纳飞行器与多小天体的交会。数值仿真结果表明,该方案能够大幅度降低转移过程的燃料消耗,并缩短转移时间。     

Simulating planetary wave propagation to the upper atmosphere during stratospheric warming events at different mountain wave scenarios

Parameterization schemes of atmospheric normal modes (NMs) and orographic gravity waves (OGWs) have been implemented into the mechanistic Middle and Upper Atmosphere Model (MUAM) simulating atmospheric general circulation. Based on the 12-members ensemble of runs with the MUAM, a composite of the stratospheric warming (SW) has been constructed using the UK Met Office data as the lower boundary conditions. The simulation results show that OGW amplitudes increase at altitudes above 30 km in the Northern Hemisphere after the SW event. At altitudes of about 50 km, OGWs have largest amplitudes over North American and European mountain systems before and during the composite SW, and over Himalayas after the SW. Simulations demonstrate substantial (up to 50–70%) variations of amplitudes of stationary planetary waves (PWs) during and after the SW in the mesosphere-lower thermosphere of the Northern Hemisphere. Westward travelling NMs have amplitude maxima not only in the Northern, but also in the Southern Hemisphere, where these modes have waveguides in the middle and upper atmosphere. Simulated variations of PW and NM amplitudes correspond to changes in the mean zonal wind, EP-fluxes and wave refractive index at different phases of the composite SW events. Inclusion of the parameterization of OGW effects leads to decreases in amplitudes (up to 15%) of almost all SPWs before and after the SW event and their increase (up to 40–60%) after the SW in the stratosphere and mesosphere at middle and high northern latitudes. It is suggested that observed changes in NM amplitudes in the Southern Hemisphere during SW could be caused by divergence of increased southward EP-flux. This EP-flux increases due to OGW drag before SW and extends into the Southern Hemisphere.     

A new bearing fault diagnosis method based on modified convolutional neural networks

Fault diagnosis is vital in manufacturing system. However, the first step of the traditional fault diagnosis method is to process the signal, extract the features and then put the features into a selected classifier for classification. The process of feature extraction depends on the experimenters’ experience, and the classification rate of the shallow diagnostic model does not achieve satisfactory results. In view of these problems, this paper proposes a method of converting raw signals into two-dimensional images. This method can extract the features of the converted two-dimensional images and eliminate the impact of expert’s experience on the feature extraction process. And it follows by proposing an intelligent diagnosis algorithm based on Convolution Neural Network (CNN), which can automatically accomplish the process of the feature extraction and fault diagnosis. The effect of this method is verified by bearing data. The influence of different sample sizes and different load conditions on the diagnostic capability of this method is analyzed. The results show that the proposed method is effective and can meet the timeliness requirements of fault diagnosis.     

Case study of inclined sporadic E layers in the Earth’s ionosphere observed by CHAMP/GPS radio occultations: Coupling between the tilted plasma layers and internal waves

We have used the radio occultation (RO) satellite data CHAMP/GPS (Challenging Minisatellite Payload/Global Positioning System) for studying the ionosphere of the Earth. A method for deriving the parameters of ionospheric structures is based upon an analysis of the RO signal variations in the phase path and intensity. This method allows one to estimate the spatial displacement of a plasma layer with respect to the ray perigee, and to determine the layer inclination and height correction values. In this paper, we focus on the case study of inclined sporadic E (E_s) layers in the high-latitude ionosphere based on available CHAMP RO data. Assuming that the internal gravity waves (IGWs) with the phase-fronts parallel to the ionization layer surfaces are responsible for the tilt angles of sporadic plasma layers, we have developed a new technique for determining the parameters of IGWs linked with the inclined E_s structures. A small-scale internal wave may be modulating initially horizontal E_s layer in height and causing a direction of the plasma density gradient to be rotated and aligned with that of the wave propagation vector k. The results of determination of the intrinsic wave frequency and period, vertical and horizontal wavelengths, intrinsic vertical and horizontal phase speeds, and other characteristics of IGWs under study are presented and discussed.     

空间辐射器热分析

在航天飞机温控系统中,空间辐射器是最主要部件。对以航天飞机蒙皮为辐射表面的,单面翼—管式空间辐射器进行了详细的热分析,把平均翼效率代替局部翼效率,利用有限差分的方法对单面翼—管式辐射器进行了性能计算。     

从日地系统L2出发借力月球飞越近地小行星

对于停留在日地系统L2的“嫦娥2号”探测器,其后续飞行方案有多个选项,例如主动撞月或重返月球轨道、返回地球轨道或再入大气、飞往地月系统L1/L2或日地系统L1、进入深空飞越近地小行星(最终,“嫦娥2号”于2012年12月13日成功地实现了对Toutatis小行星的近距离飞越)。探讨上述的飞行方案需要对飞行轨道进行初步设计,总的速度脉冲限制在100 m/s以内并且需要考虑探测器同时受到太阳、地球、月球的引力作用。本研究设计了探测器从日地系统L2出发借力月球实现Toutatis小行星飞越的飞行方案,与直接飞越方案相比,借力月球可以进一步节省探测器的燃料消耗,其等效速度脉冲设计值为58.47 m/s。     

A distributed approach for lidar-based relative state estimation of multi-UAV in GPS-denied environments

In this paper, we present a distributed framework for the lidar-based relative state estimator which achieves highly accurate, real-time trajectory estimation of multiple Unmanned Aerial Vehicles(UAVs) in GPS-denied environments. The system builds atop a factor graph, and only onboard sensors and computing power are utilized. Benefiting from the keyframe strategy, each UAV performs relative state estimation individually and broadcasts very partial information without exchanging raw data. The com...     

CHAMP卫星加速度计标校参数序列的谱分析

给出了利用能量守恒方法求定CHAMP卫星加速度计标校参数的基本原理和算法．对2001年8月-2003年12月共约两年半的CHAMP卫星加速度计数据进行了标校,导出了尺度、偏差和偏差漂移参数的时间序列,分别采用最小二乘谱分析和抗差谱分析对这些时间序列进行了分析．结果表明,尺度、偏差和偏差漂移参数都有明显的周期变化,但各主周期项略有差异．尺度的主周期是441d、220d、126d和13．4d的周期变化,其中220d和441d的周期变化的贡献相对较大．偏差中有明显的220d、126d和13．4d周期变化,各周期变化的贡献几乎相当;偏差漂移的主周期是220d、13．4d和9d的周期变化,其中13．4d的周期变化最为显著,几乎比其他周期项变化高出一个数量级．另外尺度和偏差参数还有明显的长期变化,而偏差漂移参数的长期变化不明显．     

一种新型充气式重力梯度杆的研制和在轨展开试验

文章对中国“新技术验证一号”卫星搭载的一种新型充气式重力梯度杆的研制和在轨试验情况进行了介绍。重力梯度杆在小卫星控制领域中具有较好的应用前景,而充气结构具有轻质、占用空间小、发射成本低的特点,采用充气式重力梯度杆可避免传统机械式重力梯度杆质量重、尺寸大和机构复杂的缺点,它以充气伸展臂为主要结构形式,通过充气展开伸直成为重力梯度杆,既作为卫星重力梯度杆又通过在轨试验验证空间充气展开结构的性能。在轨试验结果表明充气式重力梯度杆展开稳定、有序、性能可靠,可以满足小卫星的性能和功能要求。该试验也是中国首个成功的充气展开结构在轨技术验证试验,标志着中国的充气展开结构技术初步具备了工程化能力。