超高压比民用发动机部件技术水平初步研究

提高总增压比是下一代民用发动机的重要发展趋势之一,有必要对于这一特征的涡扇发动机进行循环参数的研究。利用已有基于Gasturb平台开发的0维变比热部件级性能计算模型,在发动机安装尺寸给定的前提下,总增压比由40提高至60,分析比较不同构型的直驱风扇方案与齿轮传动方案对部件效率,冷却水平对循环参数优选过程的影响。结果表明:为实现更低耗油率,采用更高设计循环增压比,需要部件效率平均提高1%,冷却水平提高20%,此时性能均优于现有的大涵道比涡扇发动机GTF-11。因此,若技术水平未能达到预期目标,则需匹配合适的增压比才能达到更低的耗油率。     

流动参数对发动机冷却用引射器性能的影响

为了探索引射器在航空发动机空气系统中的应用可行性,采用标准k-ω模型并求解雷诺平均Navier-Stokes方程组的数值方法,分析了流动参数对发动机冷却用引射器引射系数、压力损失系数及引射性能综合参数的影响.结果表明:膨胀比由9增大至10.1,引射系数增大了 66％;膨胀比由15.2增大至20.2,引射系数降低了 19...     

通用化测控应答机的设计

文章介绍了测控应答机的现状及研究背景，并对研制中的困难及今后的发展需求进行了分析，提出了通用化测控应答机的设计方案及关键技术，可供通用化测控应答机设计和批量生产参考。     

Comparison of peak characteristics of F2 ionospheric layer over Tehran region at a low solar activity period with IRI-2001 and IRI-2007 models predictions

In the present work values of peak electron density (NmF2) and height of F2 ionospheric layer (hmF2) over Tehran region at a low solar activity period are compared with the predictions of the International Reference Ionosphere models (IRI-2001 and IRI-2007). Data measured by a digital ionosonde at the ionospheric station of the Institute of Geophysics, University of Tehran from July 2006 to June 2007 are used to perform the calculations. Formulations proposed by  and  are utilized to calculate the hmF2. The International Union of Radio Science (URSI) and International Radio Consultative Committee (CCIR) options are employed to run the IRI-2001 and IRI-2007 models. Results show that both IRI-2007 and IRI-2001 can successfully predict the NmF2 and hmF2 over Tehran region. In addition, the study shows that predictions of IRI-2007 model with CCIR coefficient has closer values to the observations. Furthermore, it is found that the monthly average of the percentage deviation between the IRI models predictions and the values of hmF2 and NmF2 parameters are less than 10% and 21%, respectively.     

Mechanism parameters optimization of bionic frog jumping robot based on velocity directional manipulability measure

以速度方向可操作度作为跳跃性能的评价指标,从机构设计角度寻求改善仿蛙跳跃机器人跳跃性能的方法.在仿蛙跳跃机器人机构模型的基础上,建立了起跳阶段的运动学方程,得到机器人从关节空间到质心运动空间的速度映射关系,结合速度方向可操作度,利用优化算法对仿蛙跳跃机器人的机构参数进行优化,使机器人的跳跃性能达到最佳.优化结果表明,运用速度方向可操作度理论,对跳跃机器人机构参数进行优化研究是有效可行的.     

某型飞机球形灭火瓶设计改进

本文对某型飞机球形灭火瓶失效情况进行统计分析,初步确定了故障原因。通过环境适应性摸底试验进一步验证分析,进行了设计改进。改进后的灭火瓶满足使用要求。     

U管质量流量计的工作原理与设计

介绍了１种自行研制的Ｕ管质量流量计的工作原理及其设计方案。     

直升机机动性设计准则

首先给出了直升机机动性的定性解释，然后分析了桨盘载荷，桨叶载荷，装机功率、等六个设计参数对直升机的悬停跃升，平飞加速等六种机动飞行的影响，进而得出了这种机动性的设计准则，为武装直升机初步设计中的机动性设计提供了依据。     

Using the MIR bands in vegetation indices for the estimation of grassland biophysical parameters from satellite remote sensing in the Alps region of Trentino (Italy)

Development of new methods for estimating biophysical parameters can be considered one of the most important targets for the improvement of grassland parameters estimation at full canopy cover. In fact, accurate assessment methods of biophysical characteristics of vegetation are needed in order to avoid the uncertainties of carbon terrestrial sinks.

Remote sensing is a valid tool for scaling up ecosystem measurements towards landscape levels serving a wide range of applications, many of them being related to carbon-cycle models. The aim of this study was to test the suitability of satellite platform sensors in estimating grassland biophysical parameters such as LAI, biomass, phytomass, and Green herbage ratio (GR). Also, we wanted to compare some of the most common NIR and red/green-based vegetation indices with ones that also make use of the MIR band, in relation to their ability to predict grassland biophysical parameters.

Ground-truth measurements were taken on July 2003 and 2004 on the Monte Bondone plateau (Italian Alps, Trento district) in grasslands varying in land use and management intensities. From satellite platforms, an IRS-1C-LISS III image (18/07/2003; 25 m resolution in the visible-NIR and 70 m resolution in the MIR) and a SPOT 5 image (27/07/2004, 10 m resolution in the visible-NIR and MIR) were used.

LAI, biomass, and phytomass measurements showed logarithmic relationships with the investigated NIR and red/green-based indices. GreenNDVI showed the highest R² values (0.59, IRS 2003; 0.60, SPOT 2004). Index saturation occurred above approximately 100–150 g m⁻² of biomass (LAI 1.5–2). On the other hand, GR relationships were shown to be linear. MIR-based indices performed better than NIR and red/green-based ones in estimating biophysical variables, with no saturation effect. Biomass showed a linear regression with Canopy Index (MIR/green ratio) and with the Normalised Canopy Index (NCI) calculated as a normalised difference between MIR and green bands (IRS: R² = 0.91 and 0.90, respectively. SPOT: R² = 0.63 and 0.64). Similar correlations could also be found for LAI and phytomass, and GR predictability was shown to be higher than NDVI and GreenNDVI. According to these results obtained in the investigated areas, phytomass, biomass, LAI, and GR are linearly correlated with the investigated MIR band indices and as a result, these parameters could be estimated from the adopted satellite platforms with limited saturation problems.     

CATIA软件Tubing Design模块应用研究

本文系统研究了CATIA软件Tubing Design模块,建立了直升机基于特征的零部件库的建库方法及组织架构,确定了直升机管路系统设计、协同设计的一般原则.针对工程实际,提出了管路设计过程中零部件装配不必严格采用摆放规则的原则以及软管建模的新方法.