基于经验的工程变更传播路径预测方法

 针对航空产品工程变更不易预测传播路径的问题,本文利用信息论和统计学的有关原理,提出了一套基于经验的工程变更传播路径预测方法。利用熵和互信息的概念,从海量经验数据中获取在预测过程中起到重要作用的参数;以其为样本空间,提出了一种从语义和变更影响两个角度计算变更参数相似度的算法;基于贝叶斯公式,分析了多因素情况下,相关参数的被影响概率,以此作为判断变更路径的依据;最后,以某型号航空涡轮叶盘为例对本文方法进行了验证,结果表明本文方法具有一定的准确度和优越性。     

带扰流片的升力风扇操纵特性数据采集系统设计

以带扰流片的升力风扇为动力系统的无人机,在动力学建模和控制方式上与传统升力风扇无人机有很大不同,升力风扇的操纵特性是这类升力风扇无人机动力学建模的关键,而目前国内尚未检索到对此进行研究或实验的报告或文献。因此,为了研究带扰流片的升力风扇动力系统的动态操纵特性,利用LabVIEW设计并制作一套动态数据试验采集系统,设计试验输入,完成带扰流片的升力风扇操纵特性动态数据采集,所获得数据及后续建模过程表明本试验采集系统是正确、有效的。     

利用热平衡试验稳态数据修正对接机构热模型

根据热平衡试验数据与计算结果的比较,分析两者存在差异的原因,用热平衡试验稳态工况数据修正对接机构热模型中的单元划分和热网络方程。研究了对热网络方程修正的方法,基于参数化和节点群概念改进参数化节点群整合方法,以明显减少需修正系数的数量,并与分级修正和局部修正综合,提高热网络修正方法的实用性。算例表明：通过热模型修正使温度计算值与试验值的偏差达到允许的要求,表明该热模型修正方法有效。     

星地遥感数据压缩的差分编码方法研究

为了提高星地传输的工作效率,文章以信息论为理论基础,提出一种差分编码方法用于星地遥感数据的传输。同时,鉴于地表覆盖本身的不确定度与应用需求的不同,提出了分区预测差分编码与保持立体测量精度的差分编码。这两种压缩策略可进一步显著提高差分编码的压缩比。     

一种信道系数服从高斯分布的8PSK信号信噪比盲估计算法

信噪比（SNR,Signalto Noise Ratio）是衡量通信系统性能的重要指标。针对传统信噪比估计算法要求利用训练序列或一帧数据范周内信道系数恒定等问题,提出了一种8PSK信号在信道系数服从高斯分布的衰落信道下肯信噪比估计算法。该算法取接收信号实部或虚部数值运算构成中间观测量,理论分析8PSK信号经过衰落信道后...     

Changes in hyperspectral reflectance signatures of lettuce leaves in response to macronutrient deficiencies

The adaptation of specific remote sensing and hyperspectral analysis techniques for the determination of incipient nutrient stress in plants could allow early detection and precision supplementation for remediation, important considerations for minimizing mass of advanced life support systems on space station and long term missions. This experiment was conducted to determine if hyperspectral reflectance could be used to detect nutrient stress in Lactuca sativa L. cv. Black Seeded Simpson. Lettuce seedlings were grown for 90 days in a greenhouse or growth chamber in vermiculite containing modified Hoagland’s nutrient solution with key macronutrient elements removed in order to induce a range of nutrient stresses, including nitrogen, phosphorus, potassium, calcium, and magnesium. Leaf tissue nutrient concentrations were compared with corresponding spectral reflectances taken at the end of 90 days. Spectral reflectances varied with growing location, position on the leaf, and nutrient deficiency treatment. Spectral responses of lettuce leaves under macronutrient deficiency conditions showed an increase in reflectance in the red, near red, and infrared wavelength ranges. The data obtained suggest that spectral reflectance shows the potential as a diagnostic tool in predicting nutrient deficiencies in general. Overlapping of spectral signatures makes the use of wavelengths of narrow bandwidths or individual bands for the discrimination of specific nutrient stresses difficult without further data processing.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

基于FSK的测斜系统电路设计

本文重点阐述了测斜系统井下仪器数据采集单元和数据发送单元电路的设计及井上仪器解调电路的设计，给出了具体的电路设计结果及元器件参数。     

基于低矮建筑物实测数据的改进湍流物理模型

要准确模拟低矮建筑物壁面上分离涡位置的平均风压比较困难,这些区域在绕钝体流动中也是很关键的部位.本文在Spalart-Allamaras湍流物理模型的基础上,根据钝体绕流流场特性,结合低矮建筑物上的实测数据,调试并选取合适的参数,提高涡粘预测的准确性,提出了改进的S-A湍流物理模型.通过对6m立方体和Silsoe低矮建筑模型进行稳态数值模拟,由改进S-A湍流模型得到的屋面、背风和侧风面上平均风压结果,比目前公认的模拟钝体绕流效果较好的SST湍流模型有较大改善,比风洞实验更接近实测结果.由此可以看出,本文改进湍流模型的方法,将是一条提高预测建筑物表面平均风压精度很有效的途径.     

现代民用客机线路故障的检测方法

随着机队逐渐进入或将要进入老龄化,给维护人员带来形式多样的线路故障,这些故障有短路、断路和间歇性电阻性线路故障、电吝性线路故障（总线线路故障）和电感性线路故障（电磁干扰故障）,论述了如何在日常维护工作时使用三用表、兆欧表、电容表、线路故障测试仪和磁场测试设备排除上述复杂的线路故障,研究了使用目前维修单位现有的工具和测量设备排除这些故障的程序和方法。