SHS法制备硼化物陶瓷粉体的表征分析

采用自蔓延高温还原合成方法制备TiB2,TiB2-Al2O3和ZrB2-Al2O3陶瓷粉末.利用XRD,XPS,SEM以及TEM等分析测试手段对合成粉末进行表征和分析.结果表明,TiB2,ZrB2和Al2O3分别以主晶相的形式存在于所合成的各自粉体之中.相比之下,TiB2单相陶瓷粉末颗粒分布较宽.由于自蔓延高温合成(SHS)温度很高,部分颗粒形成团聚,宏观上使颗粒的平均粒径变大(＞5μm);而TiB2-Al2O3和ZrB2-Al2O3复合陶瓷粉末,因合成过程中Al2O3的形成,使得颗粒粒度分布明显变窄,分布均匀,颗粒尺寸也相应减小.分析认为这主要与复合粉末合成过程中,不同颗粒间形成良好结合的界面有关.     

相关函数在涡流检测信号提取分析中的应用

为降低涡流检测信号处理的硬件复杂程度及提升后续数据分析处理灵活度,在不借助复杂硬件自平衡技术电路前提下,在LABVIEW图形化软件平台中设计了相关函数算法程序,对示波器MDO4024C所采集的原始交流电桥信号及电桥激励信号分别进行自相关及互相关运算去噪,提取分析不锈钢管不同位置的涡流信号的幅值及相位,最后再将检测信号在极坐标图中分析显示。实验结果表明,这一方法可有效实现对不锈钢管缺陷涡流信号的去噪及特征信号提取。     

基于锥形压入的材料力学性能测试方法研究

通过压入测试以获取工程服役结构、小型构件和焊接结构焊缝过渡区的材料单轴本构关系参数,且根据材料本构关系参数来估算材料的压入硬度对于工程设计和安全评估有重要意义.对于幂律材料,本文依据锥形压入试验原理和弹塑性接触有限元分析(EPFEA),揭示了不同锥角的锥形压头其压入能量比与屈服应力之间存在线性关系,提出了基于能量原理预测金属材料本构关系部分关键参数(弹性模量、屈服应力和硬化指数)的CR-EMI (Constitutive Relationship based on Energy Method of Indentation)方法.同时,基于此种线性关系提出了由Hollomon本构关系模型参数预测硬度的H-EMI(Hardness based on Energy Method of Indentation)方法.通过对多种金属材料进行压入试验和有限元分析,验证了CR-EMI方法和H-EMI方法的有效性与精确性.     

球墨铸铁曲轴缺陷与统计分析

本文介绍了在某球墨铸铁曲轴生产厂，采用磁粉和超声波无损检测方法对曲轴进行探伤，并对探伤中发现缺陷进行了统计分析，找出了缺陷多发部位，并就产生缺陷的原理及形成机理进行了分析，提出了相应的预防措施，以期对球墨铸铁曲轴生产者有所帮助。     

Physical characterization of the deep-space debris WT1190F: A testbed for advanced SSA techniques

We report on extensive ${\mathit{BVR}}_c{I}_c$ photometry and low-resolution ($\lambda /\mathrm{\Delta }\lambda ～250$) spectroscopy of the deep-space debris WT1190F, which impacted Earth offshore from Sri Lanka, on 2015 November 13. In spite of its likely artificial origin (as a relic of some past lunar mission), the case offered important points of discussion for its suggestive connection with the envisaged scenario for a (potentially far more dangerous) natural impactor, like an asteroid or a comet.Our observations indicate for WT1190F an absolute magnitude $R_c={32.45}_{\pm 0.31}$, with a flat dependence of reflectance on the phase angle, such as ${\mathit{dR}}_c/d?～{0.007}_{\pm 2}$?mag?deg^?1. The detected short-timescale variability suggests that the body was likely spinning with a period twice the nominal figure of $P_{\mathrm{flash}}={1.4547}_{\pm 0.0005}\mathrm{s}$, as from the observed lightcurve. In the ${\mathit{BVR}}_c{I}_c$ color domain, WT1190F closely resembled the Planck deep-space probe. This match, together with a depressed reflectance around 4000 and 8500 Å may be suggestive of a “grey” (aluminized) surface texture.The spinning pattern remained in place also along the object fiery entry in the atmosphere, a feature that may have partly shielded the body along its fireball phase perhaps leading a large fraction of its mass to survive intact, now lying underwater along a tight ($～1\times 80$?km) strip of sea, at a depth of 1500?m or less.Under the assumption of Lambertian scatter, an inferred size of ${216}_{\pm 30}/\sqrt{\alpha /0.1}$?cm is obtained for WT1190F. By accounting for non-gravitational dynamical perturbations, the Area-to-Mass ratio of the body was in the range $(0.006?\mathit{AMR}?0.011)$?m²?kg^?1.Both these figures resulted compatible with the two prevailing candidates to WT1190F’s identity, namely the Athena II Trans-Lunar Injection Stage of the Lunar Prospector mission, and the ascent stage of the Apollo 10 lunar module, callsign “Snoopy”. Both candidates have been analyzed in some detail here through accurate 3D CAD design mockup modelling and BRDF reflectance rendering to derive the inherent photometric properties to be compared with the observations.     

高超声速一体化飞行器冷流状态气动特性研究

采用数值模拟和风洞实验方法.对高超声速一体化飞行器缩比模型在发动机关闭以及发动机通流状态下的气动特性进行研究.实验中采用彩色纹影系统对缩比模型飞行器的超声速流场进行显示,并通过六分量应力天平测得了全机的升力、阻力和俯仰力矩,数值模拟气动力系数以及流场特征与实验结果吻合较好,同时分析了飞行器保持静稳定状态下的质心选择范围.结果表明进气道开启之后飞行器升力阻力以及抬头力矩显著下降,但此飞行器配平迎角仍较大.该实验结果验证了数值方法的可靠性并为飞行器构型设计提供了参考数据.     

联合截获威胁下的雷达射频隐身目标搜索算法

针对基于射频(RF)隐身需求的机载雷达目标搜索问题进行了研究。通过分析实际作战中射频辐射面临的截获威胁,提出了一种基于联合截获威胁的射频隐身性能表征方法,并给出了具体的值估算方法;对机载雷达搜索任务中辐射参数的优化问题进行了建模,并采用优化算法对目标函数进行求解。通过分析典型情景下解集的分布特点,给出了从最优解集中选取最终解的方法。结果表明,提出的射频隐身性能表征方法能更好地反映截获实现过程的多域需求,提出的雷达搜索方法能够在保证探测性能的同时,提高射频隐身性能和搜索速度,能够为相控阵雷达搜索任务中参数的优化控制提供方法和依据。     

超细AP团聚表征研究

根据实际应用的需要,运用筛分技术和静电分散、分级技术相结合的方法对AP进行分级,采用质量分数对AP团聚状态进行表征。从最大荷质比、分级效率和安全可靠性3个方面确定分散、分级电压,同时将静电分散力与颗粒间范德瓦尔斯力和液桥力进行比较。计算结果表明,分散、分级电压采用6 kV是合理的。最后,从热学性质与实际生产应用两个方面对分级结果进行分析,并将此方法与传统方法进行了比较。结果表明,该方法合理、可靠。     

Internal fuselage noise: comparison of computations and tests on a Falcon airframe

An unequipped Falcon 2000 airframe, a complex heterogeneous structure reduced to the fuselage alone, was subjected to vibro-acoustic characterization within the framework of a cooperative effort by Aerospatiale, Dassault-Aviation, and Onera. Onera's Structural Dynamics and Coupled Systems Department measured the structure's vibro-acoustic responses for four mechanical excitation configurations, and analysed three structural configurations: fuselage alone without floor, with floor, and with floor and internal wall. The resulting database of vibratory and acoustic level measurements is used for validating numerical models in the low- and medium-frequency range, as well as statistical energy analysis (SEA) models in the medium- and high-frequency range.The database was analysed by Dassault-Aviation and Onera. We present here the computation/test comparisons and the limitations of the methods in use. All of the data and comparisons validate the predictive vibro-acoustic response models and methods for a Falcon fuselage subjected to a mechanical excitation.     

Aerodynamic database development of the ESA intermediate experimental vehicle

This work deals with the aerodynamic database development of the Intermediate Experiment Vehicle.