小型涡喷发动机整机流场数值模拟技术研究

为计算某小型弹用涡喷发动机流场,研究了针对涡喷发动机整机的建模、网格处理以及动态工作点确定等关键技术。通过复杂结构部件建模和拼接,建立了涡喷发动机整机流场计算网格,理论模型中考虑了叶轮流场、湍流和燃烧过程的模拟,并以作用转子上气动力矩为基础计算转子的转速。在通用计算流体力学（CFD）软件中,通过编写UDF程序构建了发动机流场的计算框架。结果表明：全机流场仿真技术为分析涡喷发动机工作过程提供了有力工具,同时揭示了几何建模的精度等因素对计算结果准确性有较大影响。     

柔性转子逆回旋振动特性的研究

论述了具有陀螺效应的柔性转子在各向异性支承条件下回旋振动的特性，推导出了转子在正回旋激励作用下产生逆回旋振动的条件，提出转子振动存在逆回旋带的概念，并举例说明了转子在整个转速范围和振动频率范围内回旋振动的特点，作出了逆回旋带的曲线图。     

IRI-90及其与中国电离层资料f_0F_2的比较

本文介绍了国际参考电离层IRI-90版中新增的内容,比较了它与IRI-86的主要差别。与我国电离层临频数据的统计分析表明,新版本对我国地区的适用程度有了改进。     

Effect of blank quenching on shear spinning forming precision of 2219 aluminum alloy complex thin-walled components

The quenching-spinning (Q-S) process, i.e., shear spinning after blank quenching, has been increasingly utilized to form 2219 aluminum alloy complex thin-walled components. However, the changes in material property, shape and stress of the blanks after quenching will affect the spinning forming precision. In this study, the rules and mechanisms of these effects are investigated based on a combined finite element (FE) model including blank quenching and component spinning process. The results indicate that the increase of material strength and the existence of distortion of the quenched blank lead to a notable increase in the non-uniformity of the circumferential compressive stress in the spinning area and the increase of the flange swing height during spinning. These changes result in an increase in the wall thickness and component-mandrel gap of the components. The quenching residual stress has little effect on wall thickness and roundness but can noticeably reduce the component-mandrel gap. This is because that the existence of quenching residual stress of the blank can lead to the decrease of the maximum circumferential compressive stress of the workpiece in spinning and an obvious drop in the maximum compressive stress after reaching the stress peak. Quenching distortion is the main factor affecting the roundness. Moreover, the optimized installation way of the blank for spinning is obtained.     

基于化学反应器网络模型法的预混气组分对NOx反应路径影响研究

摘 要：为探究预混气组分对不同反应路径下NOx生成影响,针对高压射流反应器,基于CFD流场特征等,构建优化了单PSR、2PSR、3PSR以及PSR+PFR四种化学反应器网络模型。在贫预混燃烧条件下,研究了纯CH4及其混合气燃烧时不同反应路径下NOx的生成情况,得出了燃烧室内不同反应区域每条反应路径NOx的生成量。结果表明,纯CH4燃烧产生的NOx主要来自于热力型、快速型和N2O-中间体型三条反应路径。绝热火焰温度的提高主要促进了热力型和N2O-中间体型NOx的生成。随着CH4或CO中加入H2摩尔分数的增加,NOx排放总量降低,快速型NOx生成速率降低,特别是火焰刷区域的。另外,混合气中CO摩尔分数的增加会导致NOx生成量增多。     

基于AOE网的过站航班保障进程优化

航班地面保障是机场运行的重要环节，为了提升航班地面保障效率，针对某机场航班地面保障流程构建AOE 网，通过该机场A-CDM 系统记录的航班节点数据求出该机场航班地面保障作业的“关键路径”。通过对关键路径上可压缩工序的分析，对该机场的地面保障作业流程进行优化。以我国西南地区某机场航班地面保障的实际数据为基础，剔除不可抗力造成的不正常数据，分别计算保障流程优化前后的航班过站时间。结果表明：在33 组航班数据中，该机场使用AOE 网络优化后的保障作业流程比优化前平均减少地面保障作业时长6.1 分钟/架次，说明通过合理地优化航班地面保障进程，可以有效提高机场的运行效率。     

Monthly mean foF2 model for an African low-latitude station and comparison with IRI

We have employed the hourly values of the ionospheric F-region critical frequency (foF2) obtained from Ouagadougou ionosonde, Burkina Faso (geographic coordinates 12° N, 1.8° W) during the interval of 1985–1995 (solar cycle 22) and solar radio flux of 10 cm wavelength (F10.7) to develop a local model (LM) for the African low-latitude station. The model was developed from regression analysis method, using the two-segmented regression analysis. We validated LM with foF2 data from Korhogo observatory, Cote d’Ivorie (geographical coordinates 9.3° N, 5.4° W). LM as well as the International Reference Ionosphere (IRI) agrees well with observations. LM gave some improvement on the IRI-predicted foF2 values at the sunrise (06 LT) at all solar flux levels and in all seasons except June solstice. The performance of the models at the representing the salient features of the equatorial foF2 was presented. Considering daytime and nighttime performances, LM and IRI are comparable in low solar activity (LSA), LM performed better than IRI in moderate solar activity (MSA), while IRI performed better than LM in high solar activity (HSA). CCIR has a root mean square error (r.m.s.e), which is only 0.10 MHz lower than that of LM while LM has r.m.s.e, which is about 0.05 MHz lower than that of URSI. In general, our result shows that performance of IRI, especially the CCIR option of the IRI, is quite comparable with the LM. The improved performance of IRI is a reflection of the numerous contributions of ionospheric physicists in the African region, larger volume of data for the IRI and the diversity of data sources, as well as the successes of the IRI task force activities.     

整体构件周向叶片电解加工流场设计及实验

针对整体构件周向叶片的特点与加工难点,设计了带有内置绝缘腔的电解套型加工工具阴极,建立了两种进液方式的流场三维模型,采用有限元法对两种进液方式的流场进行仿真计算。计算结果表明由绝缘腔的叶盆叶背两侧进液并对出液口进行优化的流场方式较好,电解液流速较高且流场较均匀。使用根据有限元仿真结果设计的阴极开展实验,结果表明实验与流场仿真结果相符,采用优化流场模型的加工过程流场稳定,加工效率较高。     

航空发动机冰晶结冰研究进展

飞机在高空区域巡航时可能遭遇冰晶气象，导致发动机吸入冰晶颗粒发生结冰故障，欧美等国已将冰晶结冰纳入适航 取证要求，中国也考虑在后续发动机适航取证中增加冰晶结冰考核项目。为了准确掌握国内外冰晶结冰研究现状，通过调研文 献，对比了冰晶结冰与过冷水滴结冰在结冰位置、结冰条件和结冰机理方面的区别，阐述了试验研究和数值仿真方面的重要进展， 其中，试验研究分别介绍了冰晶在静态部件和动态部件内的撞击与结冰过程，数值仿真按照空气流场计算、冰晶运动轨迹和撞击 特性计算及结冰计算的顺序，总结了欧拉法与拉格朗日法的区别、冰晶运动相变与黏附过程及结冰热物理模型，并介绍了冰晶结 冰软件在数值模拟中的广泛应用，提出了目前在冰晶碰撞、结冰热力学模型、结冰探测及风洞试验等方面需要进一步研究的内容， 以期为中国冰晶结冰研究提供参考。     

矩形变截面压杆的临界力

本文用幂级数解法推导了截面厚度h不变,宽度b沿杆长线性变化的矩形变截面压杆的临界力公式,给出了临界力公式的适用范围。所得结果对于压杆的设计有应用价值。