Modeling of ionospheric parameter variations in East Asia during the moderate geomagnetic disturbances

The results of modeling of ionospheric disturbances observed in the East Asian region during moderate storms are presented. The numerical model for ionosphere–plasmasphere coupling developed at the ISTP SB RAS is used to interpret the data of observations at ionospheric stations located in the longitudinal sector of 90–130°E at latitudes from auroral zone to equator. There is obtained a reasonable agreement between measurements and modeling results for winter and equinox. In the summer ionosphere, at the background of high ionization by the solar EUV radiation in the quiet geomagnetic period the meridional thermospheric wind strongly impacts the electron concentration in the middle and auroral ionosphere. The consistent calculations of the thermospheric wind permit to obtain the model results which are closer to summer observations. The actual information about the space-time variations of thermosphere and magnetosphere parameters should be taken into account during storms.     

基于PDM的元器件库模型研究与应用

在分析国内电子企业元器件管理中存在问题的基础上,建立了基于产品数据管理的元器件库模型.重点讨论了模型中的对象模式和元器件的分类管理,提出了新元器件入库申请流程的设计.最后给出了产品设计过程中模型在元器件选用控制方面的工程实例.     

Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle components

By integrating topology optimization and lattice-based optimization, a novel multi-scale design method is proposed to create solid-lattice hybrid structures and thus to improve the mechanical performance as well as reduce the structural weight. To achieve this purpose, a two-step procedure is developed to design and optimize the innovative structures. Initially, the classical topology optimization is utilized to find the optimal material layout and primary load carrying paths. Afterwards, the solid-lattice hybrid structures are reconstructed using the finite element mesh based modeling method. And lattice-based optimization is performed to obtain the optimal cross-section area of the lattice structures. Finally, two typical aerospace structures are optimized to demonstrate the effectiveness of the proposed optimization framework. The numerical results are quite encouraging since the solid-lattice hybrid structures obtained by the presented approach show remarkably improved performance when compared with traditional designs.     

系统可靠性评定的熵（法）近似限

将近代Ｓｈａｎｎｏｎ信息论的信息概念广义化,利用信息量的“可加性”特性和离散变量熵的一般表达式,并与可靠性工程理论相结合,推导了由成败型或指数型单元所组成的串、并联系统可靠性评定用的熵（法）近似下限计算公式。应用本文公式所得出的评定结果总是介于经典和贝叶斯（法）近似下限之间,既不偏于保守,又不过分冒进,相当令人满意     

运八起落架上采用耐久性设计更改的分析

介绍了运八起落架延寿过程中采用了耐久性设计典型范例11项,实施于起落架设计的改进和制造。包括:高强度钢构件的注油嘴、管状结构件、高应力花键镀铬表面在镀前进行喷丸、U形接头防腐措施、采用光弹修形控制应力水平、采用喷丸强化、重要模压件表面加工、重要焊接件焊缝加工、采用防氧化处理、改进防腐措施等。经过疲劳试验验证,其效果是极其显著的。     

大面积覆铜多层印制板通孔焊接温度场仿真

为了提高型号产品中连接大面积覆铜的通孔元器件焊点的过锡率,进而提高焊点的可靠性,本文建立了四层大面积覆铜通孔焊焊接三维模型,研究添加温度补偿后的四层覆铜的印制板通孔焊接过程中的温度场分布,得出焊接温度对过锡率的影响规律。发现焊接温度350 ℃时通孔过锡量达到100%,这与实际焊接所有焊点过锡量均达到100%的结果一致。有限元温度仿真结果与热电偶测温结果吻合较好,表明该模型可以准确地模拟焊接过程中温度演化,可为大面积覆铜通孔焊点的手工焊接过程和焊接参数优化提供理论指导。     

空间站常用元器件的霉菌敏感性研究

为研究空间站常用元器件的霉菌敏感性,选取空间站常用11大类元器件,针对霉菌对元器件的可能影响进行深入分析。基于空间站特定霉菌环境设计了加速试验方案,研究建立了基于元器件损伤程度的敏感等级分类方法,获取了不同元器件对霉菌的敏感性结果以及对应的敏感部位,为后续空间站用元器件质保工作的完善奠定基础。     

Stability of the seasonal variations in diurnal and semidiurnal components of mid-latitude F2 layer parameters

We report work utilizing 15-min resolution ionospheric data obtained with DPS-4 digisonde in 2003–2011 to study the seasonal variations in amplitudes and phases of the most powerful spectral components of the F2 layer critical frequency (foF2) and peak height (hmF2) fluctuations over Irkutsk (52.5°N, 104.0°E). We show that fluctuations of both parameters contain quasi-harmonic components with periods of T_n = 24/n h (n = 1–7). The number of distinct spectral peaks varies from 3 in summer to 7 in winter. Amplitude and phase characteristics of the diurnal (n = 1) and semidiurnal (n = 2) components is studied using the data sets extracted from the original data sets with band-pass filter. It has been found that the amplitudes of diurnal/semidiurnal foF2 and diurnal hmF2 components are maximum in winter and minimum in summer. Amplitudes of the diurnal components vary gradually; those of the foF2 semidiurnal one, abruptly, thus forming a narrow winter maximum in November–January. The phase (local time of maximum) of the diurnal foF2 component increases gradually by 4–6 h from winter to summer. The phase of the semidiurnal foF2 component is nearly stable in winter/summer and sharply decreases (increases) by 2–3 h near the spring (autumn) equinox. The phase of the diurnal component of hmF2 (local time of minimum) varies slightly between 1130 and 1300 LT; that of the semidiurnal one decreases (increases) by 4–6 h from January to March (from September to November). The results obtained show that the main features of seasonal variations in the diurnal and semidiurnal components of the mid-latitude F2 layer parameters recur consistently during the solar activity growth and decline phases.     

基于修正差分进化算法确定周期内多载波微放电等效功率

微放电是空间微波部件设计所必须考虑的失效效应之一,随着空间宽带多载波模式的广泛采用,多载波条件下微波部件微放电问题引起广泛关注。针对周期内多载波微放电等效功率计算所采用传统经验公式的不足,提出了一种基于修正差分进化算法的确定周期内多载波微放电等效功率的全局优化方法。该方法通过对多载波合成信号功率特性进行分析,推导获得了 20个电子渡越时间内信号能量的表达式,采用二次插值法进行局部搜索,采用修正差分进化算法进行全局优化,从而高效、准确获得全局最优解。以幅度相等、频率间隔相等的多载波信号为例,进行了等效功率的确定,与经验公式的预测结果相当,验证了所提出方法的有效性;同时,对幅度不同、频率间隔不等的多载波信号进行了处理,获得了能够指导微波部件微放电设计的最坏状态及其等效功率。所提出方法不仅适用于幅度不同、频率间隔不等的多载波信号情况,并且能够提供微放电最坏状态时的相位分布,为多载波微放电实验验证提供相位输入。所提出方法相比传统的基于经验公式的方法具有明显优势,为空间宽带多载波工作微波部件微放电设计提供有效依据,在卫星转发器多载波微放电分析及设计中具有价值。     

Data-driven prescribed performance control for satellite with large rotational component

In this paper, the high precision attitude control for satellite with large misaligned rotational component is investigated, proposing a novel model-free prescribed performance adaptive control (MF-PPAC) method. Based on the model-free adaptive control (MFAC) strategy, high-precision attitude control is achieved depending on the system measurement rather than the spacecraft mathematical model, which demonstrates the superiority in handling nonlinearity and uncertainty of the spacecraft system, especially for those with unbalance of the rotational component. Furthermore, the transient and the stable-state behavior of the tracking error using MFAC is constrained in the prescribed performance bounds and converges to zero gradually with the utilization of prescribed performance function (PPF) and error transformation method. Finally, the convergence and boundedness of the system error, the bounded-input bounded-output (BIBO) stability of the proposed MF-PPAC is demonstrated by the contraction mapping theory. Simulation and comparison with disturbance-observer-based PD control and MFAC illustrate the effectiveness of the proposed method.