基于FW-H方程的旋翼气动声学计算研究

由流体力学N S方程导出的非齐次波动方程———FfowcsWilliams Hawkings方程(简称FW H方程),可以精确地描述在静止流体中运动的物体与流体相互作用的发声问题。以FW H方程为理论模型,将旋翼桨叶运动发声问题等效为包含桨叶的任意运动控制面(声源面)的声辐射问题,并在旋翼绕流Euler方程数值模拟的基础上,在时域内计算了悬停旋翼和前飞旋翼的声场。应用于UH 1H和AH 1/OLS两种旋翼模型的气动声学计算表明:计算结果与噪声实验值符合良好;所研制的程序不仅能够较准确地计算单极子噪声和偶极子噪声,而且具有较强的跨音速四极子噪声预测能力。     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

恒温热源条件下实际回热式布雷顿循环的功率密度优化

计人工质与高、低温侧换热器和回热器的热阻损失、压气机和涡轮机中不可逆压缩和膨胀损失及管路系统中的压力损失，用有限时间热力学方法，导出了恒温热源条件下实际回热式布雷顿循环功率密度与压比间的解析式，借助于数值计算，研究了高、低温侧换热器和回热器的热导率分配对最大功率密度的影响。     

MATLAB电力系统模块中频谱分析的实现

给出了利用电力系统模块(PSB)工具箱对仿真波形进行频谱分析的一种新方法.该方法以MATLAB提供的PSBFFT_SCOPE函数为基础,对其输入变量加以改造,克服了其不能应用于变步长算法模型频谱分析的缺陷,拓宽了在PSB工具箱中进行频谱分析的范围.实际仿真结果表明,该方法分析正确,使用简捷,在实际仿真过程中是切实可行的.     

芳纶纤维／环氧复合材料界面超声连续改性处理

运用超声技术在芳纶/环氧复合材料制备过程中对其界面进行改性处理,分析了超声处理过程中纤维与树脂之间浸润性的变化趋势以及超声作用对复合材料界面性能和力学性能的影响。结果表明:超声是通过改善纤维与树脂之间的浸润性,提高复合材料的界面性能及力学性能。     

基于BP人工神经网络的GPS／SINS组合导航算法

基于扩展Kalman滤波的GPS／SINS组合导航算法，需要对原始的非线性连续系统模型进行线性化和离散化处理，要求系统噪声和测量噪声为零均值的高斯白噪声，且易于出现滤波器发散。BP人工神经网络毋需对所求解的问题建模，能够很好地逼近系统非线性特性，获得较高精度的导航定位信息；还具有计算过程稳定，不涉及矩阵求逆，不需要迭代逼近，以及容易实现并行处理等优点。本文设计适用于GPS／SINS组合导航系统的BP网络模型，并在标准的BP算法基础上，采用共轭梯度法改进网络训练速度及精度。最后，通过仿真算例说明BP网络方法用于GPS／SINS组合导航计算的可行性。     

粘流与无粘流的相互作用计算

本文总结了粘流/无粘流的各种计算方法和结果。重点在于介绍定常流动中的弱相互作用。首先叙述了弱相互作用的数学模型。给出了不可压流动和跨音速流动中粘流/无粘流相互作用的某些正耦合的计算结果。讨论了在分离区附近边界层正方法失效的原因。然后介绍了边界层反方法和适用于带分离的流动中半反方法耦合的粘流/无粘流的相互作用方法。文中也简单地总结了三维情况的应用和强相互作用。     

对红外制导系统的噪声分析与动态模拟

本文基于近红外制导系统噪声分析的框架模型，在分析探讨主要噪声源的基础上，给出了基本噪声立意，建立了探测器等组成部件基本噪声的功率谱分析式，设计出一种以红外探测器为抑制主体的减噪系统。通过目标、误差响应率的测定与跟踪试验获得较好的效果。     

A lightning swept stroke model: A valuable tool to investigate the lightning strike to aircraft

In the context of lightning strike on the Dassault Falcon family of aircraft, the standard zoning of Falcon 50, 900 and 2000, inferred from FAA and EUROCAE WG31 documents [US Department of Transportation, Federal Aviation Administration, Advisory Circular AC 20-53A, 1985; US Department of Transportation, Federal Aviation Administration, Advisory Circular AC 20-53B, Draft, 1991; EUROCAE WG 31, Aircraft Lightning Zoning Standard, ED-91, 1998], has been presented. Zoning proves to be quite similar between the three types of aircraft. Thanks to the feed-back on lightning strikes to Falcon, lightning traces have been observed on the fuselage for different flight conditions and aircraft. Observations are compared with the zoning performed by Dassault. A physical model, developed by ONERA, was used to simulate the sweeping of lightning on the fuselage of a Falcon 900. The results are in good agreement with the lightning traces observed on the fuselages.     

Mиг－23飞机尾旋试飞体会

Ｍиг－２３飞机是一种变后掠翼战斗机，它的尾旋动态及改出尾旋的方法很复杂。根据在该机上进行的四次尾旋飞行试验，叙述其尾旋进入的方法、尾旋中的动态和改出尾旋的方法。并举出三个典型的尾旋模态实例，详细记述整个尾旋过程和进行分析，说明Ｍиг－２３飞机尾旋动态的复杂性及其表现出的特点。最后，提出了几点在判断和改出Ｍиг－２３飞机的尾旋时应注意的事项。