HJ405直流电压标准的设计

介绍了高稳定性的直流电压参考标准的研制 ,该标准器可取代 0 .0 0 0 2级以下的标准电池 ,具有较高的应用和推广价值     

中层顶Na层稳定性的初步研究

利用武汉大学激光雷达的观测数据验证了当前Na层数值模型的普适性．在简化模型的基础上，采用微扰法，分析模型的稳定性．计算表明，在参数的调节范围内，所有特征值的实部都小于零，这说明该模型是个稳定系统．扰动垂直波长和扩散系数对模型的所有特征值都会产生较大影响，背景温度和化学成分密度则只对某些特征值影响较大．     

频标比对中一种新的测量方法

在用比相法测量频率时 ,一般都是在 0°～ 360°范围内进行 ,由于在靠近 0°和 360°时存在有“死区”和非线性 ,使得系统的测量准确度和稳定性受到影响。为了解决这个问题 ,本文介绍一种新的测量方法 ,能够在测量中避开非线性区域 ,达到提高测量准确度和稳定性的目的 ,自校稳定性可达 2 6× 10 - 13 /s。     

导弹制导技术面临的新挑战

从制导律、仿真、冗余技术、复合制导四个方面论述了导弹制导技术面临的新挑战，并提出了解决的途径。     

带柔性伸缩附件航天器几何非线性振动稳定性

研究由中心刚体和可伸缩柔性附件组成的非线性刚柔耦合系统，不同于大多数文献只研究柔性附件的横向弯曲变形对系统动态特性的影响，同时考虑了柔性附件的拉伸变形、截面转角变化同弯曲变形的相互耦合作用，并且以非线性几何关系作为基本出发点，建立了伸缩运动同柔性变形、姿态运动之间的非线性耦合动力学模型，然后基于能量积分和动量矩积分构造首次积分，分析了非线性耦合系统的运动稳定性。     

用现代谱估计法实现导弹系统仿真模型的高可信度确认

本文概述导弹仿真模型的确认方法和各自的优缺点及应用范围。分析了导弹系统仿真过程输出序列的特点,并根据现代谱估计方法对短序列、低信噪比序列进行谱估计时分辩力高的特点,提出了一种导弹系统仿真模型有效性确认的新方法,并结合某型号半实物仿真过程给出应用结果。     

基于Matlab的被动型氢原子频标仿真模型研究CSCD

针对被动型氢原子频标的特点,分别建立了物理系统和伺服环路的仿真模型,搭建了氢原子频标的整个系统的闭环仿真模型。在开环和闭环两种情况下对氢原子频标进行仿真分析和实验验证。     

基于MATLAB间断照射雷达信号仿真技术

针对间断照射雷达信号质量分析过程中没有实际雷达的问题,根据复杂间断照射雷达信号产生原理,提出了用任意波形发生器和微波信号源模拟雷达波形的方法,基于软件无线电技术,给出了用MATLAB软件仿真复杂基带调制信号并导入任意波形发生器的具体实施方案。采用该方案设计的信号模拟方法,产生的信号涵盖调制副载波参数、脉冲同步信号、编码信息等丰富的内容,可以解决实验室环境中复杂间断照射雷达信号的获取问题。经过试验验证,该仿真信号的方案具有通用性好、易于实现等特点,可以为相同体制复杂调制信号的产生提供方法和手段,减少试验成本。     

LEO enhanced Global Navigation Satellite System (LeGNSS) for real-time precise positioning services

Global Navigation Satellite System (GNSS) has been widely used in many geosciences areas with its Positioning, Navigation and Timing (PNT) service. However, GNSS still has its own bottleneck, such as the long initialization period of Precise Point Positioning (PPP) without dense reference network. Recently, the concept of PNTRC (Positioning, Navigation, Timing, Remote sensing and Communication) has been put forward, where Low Earth Orbit (LEO) satellite constellations are recruited to fulfill diverse missions. In navigation aspect, a number of selected LEO satellites can be equipped with a transmitter to transmit similar navigation signals to ground users, so that they can serve as GNSS satellites but with much faster geometric change to enhance GNSS capability, which is named as LEO constellation enhanced GNSS (LeGNSS). As a result, the initialization time of PPP is expected to be shortened to the level of a few minutes or even seconds depending on the number of the LEO satellites involved. In this article, we simulate all the relevant data from June 8th to 14th, 2014 and investigate the feasibility of LeGNSS with the concentration on the key issues in the whole data processing for providing real-time PPP service based on a system configuration with fourteen satellites of BeiDou Navigation Satellite System (BDS), twenty-four satellites of the Global Positioning System (GPS), and sixty-six satellites of the Iridium satellite constellations. At the server-end, Precise Orbit Determination (POD) and Precise Clock Estimation (PCE) with various operational modes are investigated using simulated observations. It is found out that GNSS POD with partial LEO satellites is the most practical mode of LeGNSS operation. At the user-end, the Geometry Dilution Of Precision (GDOP) and Signal-In-Space Ranging Error (SISRE) are calculated and assessed for different positioning schemes in order to demonstrate the performance of LeGNSS. Centimeter level SISRE can be achieved for LeGNSS.