飞机穿越微下击暴流起飞特性实时仿真研究

以大型客机为例，对飞机穿越微下击暴流的起飞飞行特性进行了实时数字，实时混合仿真及人机半物仿真研究，分析不同风场和不同进风高度对有，无人操纵飞行的航迹特性及相应状态变量响应特性的影响，探讨了飞机起飞飞行的安全性及正确操纵策略，最后给出了一些结论。     

减压阀噪声和振动的控制

文中给出控制减压阀噪声和振动的新方法。文中指出:如果稳定系数S_r<1,阀有可能出现噪声和振动;如果稳定系数S_r>1,阀就无噪声和振动。计算和实验比较证明,该方法是可行的。     

加工时间依赖工件位置的单机成组排序问题

排序问题是一类重要的组合优化问题,现代排序问题突破了经典排序问题的种种假设,有着越来越广阔的应用前景。对加工时间依赖于工件位置的单机成组排序问题进行了研究,讨论了成组技术中,要求同一组内工件必须连续加工,加工时间的函数变量是工件所在的加工位置,目标函数分别为极小化最大完工时间与总完工时间。分别给出其多项式时间的最优算法。     

大型航天器SGCMG系统的奇异性分析研究

应用单框架控制力矩陀螺系统（SGCMG）是大型航天器姿控系统较为理想的选择，但是该系统存在严重的奇异现象，增加了操纵律的设计与开发的难度。文章从奇异性分析的角度对单杠架控制力矩陀螺系统的奇异状态进行了研究，提出了奇异可回避性的判别方法，并据此对SGCMG系统奇异状态进行了系统的分类，针对常用的各种构形的SGCMG系统进行了讨论。     

控制系统通用综合测试系统组建研究

在分析系统需求和基本功能的基础上 ,采用VXI总线技术、远程测控技术和测试应用程序自动生成等关键技术 ,按照综合测试的总体要求进行系统集成 ,组建控制系统通用综合测试系统 ,包括系统硬件和软件方案 ,对系统的硬件结构方案、模件选型以及软件流程、组成和作用进行了详细讨论。     

Online scheduling of distributed Earth observation satellite system under rigid communication constraints

This paper focused on online scheduling of distributed Earth observation satellite system in a dynamic environment. The objective was to maximize the total profit of the overall system by efficiently coordinating the different satellites with stochastic arrival of urgent tasks, subject to rigid communication and observation time window constraints. We formulated this problem as a single-task, single-robot, time-extended assignment problem with intra-schedule dependency using the multi-robot task assignment taxonomy and formulated the sub-problem after releasing urgent tasks in a mixed-integer linear programming model. We first described the online scheduling algorithm for a single satellite, then we proposed the modified consensus-based bundle algorithm (m-CBBA) and modified asynchronous consensus-based bundle algorithm (m-ACBBA) with synchronous and asynchronous communication, respectively. Compared with initial versions of CBBA and ACBBA, the modified versions added the communication loop prediction phases to efficiently utilize scarce communication opportunities and reduce the communication requirements. Additionally, we introduce two contract net protocol (CNP)-based algorithms for comparison, respectively SingleItem-CNP-based (SI-CNP) algorithm and Batch-CNP-based (BA-CNP) algorithm. Computational experiments indicated that both the total profit and percentage of scheduled urgent tasks achieved by the m-ACBBA and m-CBBA algorithms were much higher than those achieved by both SI-CNP and BA-CNP. Additionally, the number of communications needed by either m-ACBBA or m-CBBA algorithm was lower than that by SI-CNP. When the communication cost in the system is high, the m-CBBA algorithm is preferred because it balances the profit and the required number of communications. When the communication cost is low, the m-ACBBA algorithm is preferred because it achieves high total profit and high percentage of scheduled urgent tasks.     

A simple control law for reducing the effective characteristic acceleration of a solar sail

The direction and magnitude of a solar sail acceleration are strongly related. For this reason, once the characteristic acceleration has been fixed, it is not possible to modulate the acceleration in a particular direction. In this work, a semi-analytical switching control law is derived, enabling a solar sail to emulate a smaller effective characteristic acceleration (without changes in geometry or optical properties); by periodically changing the pitch (cone) angle of the sail, in average over time, the acceleration produced by the sail matches exactly (in both direction and magnitude) that of a “smaller” sail. The range in which this is possible is determined, and the limitations on this range due to the size difference is computed. The method is validated on optimal Earth-Mars trajectories.     

数控机床及工装的发展与创新设计

在现代数控加工中,由于被加工件的精度要求以及复杂度不断提高,传统加工系统无法满足使用需求,为解决这一问题,数字控制系统的核心算法以及驱动系统得到了快速发展,一些创新机构也应用到了数控机床的整机结构设计中.这些解决措施大幅提升了被加工件的精度和表面质量,促进了市场上一系列新型数控机床的出现,如复合机床、镜像铣削机床等,与之配合的新型加工工装技术也取得了相应的突破.     

自适应遥测信道速率的分包遥测调度方案

在卫星分包遥测静态分配适应单一遥测信道的方案基础上,提出了一种改进型动态自适应遥测信道速率的遥测分包方法,将包传输的控制参数由绝对参数优化为相对参数,从而满足不同信道速率、不同包源速率下的包传输适应性.该方法通过将遥测包周期计数与遥测包静态分配的传输周期的比值作为遥测包传输等待迫切比例系数,用相对的传输迫切比例系数值对全部遥测包进行排序,从大到小组入遥测信道下传.通过这种遥测包调度策略解决了遥测信道速率变换对包传输控制的影响.此外通过调节遥测包传输比例系数也能很好地解决遥测包数据率变化对信道传输的适应能力的影响,如数据率增加时整体降低包传输频率、数据率减少时整体加快包传输频率.     

测控中的星载计算机快速切换

针对低轨卫星长期管理与测控中的星载计算机所需要的切换、维护的测控时间相对较长的问题,在分析原有主、备星载计算机的时间比对方法的基础上,直接针对备机建立新的时间同步模型,并进行公式推导和理论误差分析;然后建立新的测控事件调度模型,实现时间同步数据与主备机一致性数据的同时注入,优化工作流程,并有效缩短测控时间;最后编写新的遥控作业,在测控中进行实践.应用结果表明,采用新方法可以在一个测控圈次内完成在轨星载计算机的切换与维护,MTTR(Mean Time To Repair,平均恢复时间)小于8 min,时间同步精度优于1 ms,所需测控圈次相对于原方法减少83％以上,适用于在轨卫星长期管理与测控.