考虑负载均衡的过驱动航天器推力器分配方法

以过驱动航天器的推力器控制分配误差最小、推力器负载均衡等为设计目标,构建航天器推力分配混合优化模型,并将其转化为线性规划模型进行求解,提出了一种考虑负载均衡的航天器推力器动态分配算法。该算法在确保分配误差最小前提下,能够降低各推力器的最大分配推力之差,有效均衡各推力器总工作时长和开关次数,进而延长推进系统的整体工作寿命。进一步定义了表征负载均衡性能的推力平衡度和干扰敏感度性能指标,并在此基础上给出了一种分配算法负载均能能力的定量化评价方法。在仿真验证中,采用平衡度和敏感度对算法性能进行定量评估,结果表明该方法在保证控制性能和控制分配误差的前提下,能够有效均衡各推力器最大推力,提高了系统的平衡度和对扰动力矩的鲁棒性。     

航天器新型非奇异饱和终端滑模姿态控制

针对刚体航天器姿态机动过程中存在的控制饱和与外部干扰问题,提出一类基于新型非奇异饱和终端滑模面的有限时间控制器设计方法。该控制方案不仅保证姿态机动过程的快速性,而且避免了传统的终端滑模面所带来的奇异性问题。此外,本文建议的控制器不仅显式考虑执行器输出力矩的饱和幅值要求,使航天器在饱和幅值的约束下完成姿态控制任务,而且控制器的设计对外部干扰的上界没有任何要求,也无需作任何小角度的假设。进一步的稳定性分析表明,通过引入新型非奇异饱和终端滑模,该控制器使得闭环系统能够快速收敛到滑模面的微小邻域内,继而收敛到平衡点的微小邻域内,并且系统对外部干扰具有较强的鲁棒性。数值仿真校验了该控制器在姿态机动过程中的性能。     

Anti-disturbance attitude control of combined spacecraft with enhanced control allocation scheme

In this paper, we propose a novel anti-disturbance attitude control law for combined spacecraft with an improved closed-loop control allocation scheme. More specifically, a saturated approach is adopted to guarantee the global asymptotic stability under control input saturation. To enhance the robustness of the system, a nonlinear disturbance observer is constructed to compensate the disturbances caused by inertial parameter uncertainty and unmodeled dynamics. Next, the quadratic programming algorithm is used to obtain an optimal open-loop control allocation scheme, where both energy consumption and actuator saturation have been considered in the allocation of the virtual control command. Then, a modified closed-loop control allocation scheme is proposed to reduce the allocation error under the actuator uncertainty. Finally, stability analysis of the closed-loop system with the proposed allocation scheme is provided. Simulation results confirm the effectiveness of the proposed control scheme.     

Feasible angular momentum of spacecraft installed with control moment gyros

In this paper, a fundamental approach to analyzing the maneuverability of spacecraft with mounted control moment gyros is addressed by searching feasible angular momentum. The geometrical array of control moment gyros considered is a roof array also known as a 2-SPEED system. Due to the simplicity of the singularity envelope of the array considered, it is reasonably practical to conduct rotational performance analysis of the spacecraft. This maneuverability analysis technique uses a unique chart developed in this work, which allows a guaranteed maximum torque output and angular momentum at any time without concern about the singularity problem of the control moment gyros. Therefore, the purpose of this paper is to provide a conservative method for maneuverability analysis of a spacecraft with installed control moment gyros by searching allowable maximum angular momentum. This method is demonstrated using an illustrative example.     

气体燃料燃烧强化和污染控制的分析与探讨

本篇通过燃气燃烧特性的分析，指出了强化燃烧的措施，并通过燃气燃烧污染因素的分析，指出了污染控制的措施。     

Effective control allocation using hierarchical multi-objective optimization for multi-phase flight

For different flight phases in an overall flight mission, different control and allocation preferences should be pursued considering lift, drag or maneuverability characteristics. The multi-objective flight control allocation problem for a multi-phase flight mission is studied. For an overall flight mission, different flight phases namely climbing, cruise, maneuver and gliding phases are defined. Firstly, a multi-objective control allocation problem considering drag, lift or control energy preference is constructed. Secondly, considering different control preferences at different flight phases, the analytic hierarchical process method is used to construct a comprehensive performance index from different objectives such as lift or drag preferences. The active set based dynamic programming optimization method is used to solve the real-time optimization problem. For the validation, the Innovative Control Effector (ICE) tailless aircraft nonlinear model and the angular acceleration measurements based adaptive Incremental Backstepping (IBKS) are used to construct the validation platform. Finally, an overall flight mission is simulated to demonstrate the efficiency of the proposed multi-phase and multi-objective flight control allocation method. The results show that the comprehensive performance index for different phases, which are determined from the Analytic Hierarchy Process (AHP) method, can suitably satisfy the preference requirements for different flight phases.     

Accelerated Landweber iteration based control allocation for fault tolerant control of reusable launch vehicle

This paper presents a novel Fault Tolerant Control(FTC) scheme based on accelerated Landweber iteration and redistribution mechanism for a horizontal takeoff horizontal landing reusable launch vehicle(RLV). First, an adaptive law based on fixed-time non-singular fast terminal sliding mode control(NFTSMC), which focuses on the attitude tracking controller design for RLV in the presence of model couplings, parameter uncertainties and external disturbances, is proposed to produce virtual control co...     

CAD／CAM技术在模具设计与制造中的应用

ＣＡＤ／ＣＡＭ技术的出现和应用，对传统的模具设计与制造方法有着重大影响。本文以刀柄为例介绍了它的模具结构设计、加工方案，以及应用ＣＡＤ／ＣＡＭ技术解决刀柄模具型腔的曲面造型及数控加工编程的过程。     

基于CAN总线的控制系统地面仿真测试平台研究

针对采用CAN总线进行数据传输的小卫星和运载火箭控制系统开展地面仿真测试评估研究。基于CAN总线和以太网构成总线网络,构建卫星和运载火箭控制系统地面仿真测试评估平台,给出总线上各仿真节点和实物节点的软硬件设计方案,设计了机内测试模拟方案。仿真验证分析表明,利用该平台可以对卫星和运载火箭控制系统信号、总线运行情况、控制周期和网络时延等进行正确分析,为卫星和运载火箭控制系统方案评估、控制方法和快速测试方法研究等提供理论依据和技术支持。     

基于航天器控制语言的东三平台卫星遥控作业设计与实现

针对东三平台卫星的飞行任务要求,分析了地面测控系统和卫星飞行程序,提出了遥控作业的数据接口及设计原则,并通过作业例程验证了该设计方法。利用该方法设计的系列遥控作业目前已应用在东三平台卫星的测控工程中。