一种用于导弹姿态控制系统的直接力非线性控制法

为改善传统导弹姿控系统线性控制法的不足,用相平面法分析了直接力作用下导弹的姿态运动规律和气动力作用对直接力控制的影响,提出了一种综合控制精度、姿控发动机产品特性和推进剂消耗量等指标的直接力非线性控制方法,给出了控制模型。仿真结果表明,该法能在气动力作用或干扰无法忽略的条件下实现导弹姿控发动机的开关工作正常,保证精度及推进剂消耗最省,其控制精度与线性比例微分(PD)控制律相当。     

载人飞船再入的制导、导航和控制

本文以多用途载人飞船为背景,研究再入的制导、导航与控制的任务、系统组成和工作原理,最后给出一些数字仿真结果。     

空间大型可展开天线展开末瞬时速度控制研究

本文对可展开天线的展开末瞬时的速度控制进行了研究，在可开展天线的动力学建模、动力分析、系统辩识和控制系统设计等方面做了有益的尝试，给出了可开展天线展开末瞬时速度控制的一种智能控制方法。计算机数字仿真结果表明：该控制系统能够满足控制要求，且具有良好的准确性、灵活性、适应性等。该方法也适于其他多柔性系统的末瞬时的速度控制。     

基于控制有效性因子的卫星姿态控制系统在轨重构容错控制

研究了在轨卫星姿态控制系统发生可修复性故障状况下的重构容错控制。首先在星敏感器对陀螺的标定模型中引入控制有效性因子，并利用二级卡尔曼滤波算法求解其值，以说明系统的控制有效程度。然后采用统计假设检验通过其幅值变化判断系统是否存在故障，当故障发生时，引入重构容错控制器对原控制器进行补偿控制。最后，建立卫星闭环姿态控制系统对算法进行了仿真验证，仿真结果表明该算法快速可靠，能够满足在轨卫星姿态控制系统故障状况下的性能要求。     

基于主动磁轴承的高速飞轮转子系统的非线性控制研究

针对控制力矩陀螺——主动磁轴承飞轮转子系统的强非线性和由陀螺效应产生的进动和章动导致系统的失稳问题,提出了神经网络的控制方案,设计了RBF神经网络控制器,并给出了李亚普诺夫函数的稳定性证明。研究表明,该控制器解决了陀螺效应导致的主动磁轴承-飞轮转子的不稳定性问题,且抑制了噪声对磁轴承稳定性所造成的破坏。最后,数值算例证明了该方法消除噪声的可行性和有效性。     

提高控制系统可靠性惯性仪表冗余方案分析

叙述了提高控制系统可靠性惯性仪表冗余的几种典型方案，对它们的优缺点进行了分析、比较。最后，提出冗余的一般准则和注意事项。     

基于DSP+CPLD的射频源控制

采用数字信号处理器(DSP)和可编程逻辑器件(CPLD)技术，设计了射频信号源控制电路板。介绍了控制部分硬件和软件的组成，并给出了所设计软件的主程序。用线性调频和脉冲两种信号进行了仿真实验。结果表明，所设计的射频源的输出符合要求，控制灵活。     

红外／紫外双色制导系统数学模型及数字仿真

介绍了便携式防空导弹双色导引头中所采用的数字式控制系统代替传统的模拟式控制系统的方法。对导引头和自动驾驶仪部分的数学模型作了简化，并作了全弹道数字仿真。仿真结果表明，该双色制导体系设计方便，抗干扰能力强等。     

Fault-tolerant control with mixed aerodynamic surfaces and RCS jets for hypersonic reentry vehicles

This paper proposes a fault-tolerant strategy for hypersonic reentry vehicles with mixed aerodynamic surfaces and reaction control systems (RCS) under external disturbances and subject to actuator faults. Aerodynamic surfaces are treated as the primary actuator in normal situations, and they are driven by a continuous quadratic programming (QP) allocator to generate torque com-manded by a nonlinear adaptive feedback control law. When aerodynamic surfaces encounter faults, they may not be able to provide sufficient torque as commanded, and RCS jets are activated to augment the aerodynamic surfaces to compensate for insufficient torque. Partial loss of effective-ness and stuck faults are considered in this paper, and observers are designed to detect and identify the faults. Based on the fault identification results, an RCS control allocator using integer linear programming (ILP) techniques is designed to determine the optimal combination of activated RCS jets. By treating the RCS control allocator as a quantization element, closed-loop stability with both continuous and quantized inputs is analyzed. Simulation results verify the effectiveness of the proposed method.     

Multi-UAV coordination control by chaotic grey wolf optimization based distributed MPC with event-triggered strategy

The paper proposes a new swarm intelligence-based distributed Model Predictive Control (MPC) approach for coordination control of multiple Unmanned Aerial Vehicles (UAVs). First, a distributed MPC framework is designed and each member only shares the information with neighbors. The Chaotic Grey Wolf Optimization (CGWO) method is developed on the basis of chaotic initialization and chaotic search to solve the local Finite Horizon Optimal Control Problem (FHOCP). Then, the distributed cost function is designed and integrated into each FHOCP to achieve multi-UAV formation control and trajectory tracking with no-fly zone constraint. Further, an event-triggered strategy is proposed to reduce the computational burden for the distributed MPC approach, which considers the predicted state errors and the convergence of cost function. Simulation results show that the CGWO-based distributed MPC approach is more computationally efficient to achieve multi-UAV coordination control than traditional method.