由喷嘴连接的燃烧室到供应系统压力振荡传递过程研究

为了研究在压力振荡由液体火箭发动机燃烧室传递到供应系统的过程中喷嘴所起的作用,从理论上分析了压力振荡由燃烧室到供应系统通过喷嘴的传递过程,推导了振荡传递过程的传递函数.讨论带有各种喷嘴的供应系统的动态特性,对供应系统管路长度、燃烧室压强、喷嘴种类、喷嘴压降及喷嘴结构尺寸对燃烧室压力振荡引起供应系统压力振荡的影响进行了计算,得到了喷嘴以及工况参数在传递过程中的影响规律.      

故障星分布对星座PDOP可用性影响的建模及评价

 导航星座定位精度衰减因子（PDOP）可用性是卫星导航系统顶层设计的重要指标。研究了不同故障星分布状况对全球导航星座PDOP可用性的影响。首先,从概率角度并采用组合方法建立了全球导航星座PDOP可用性指标的统计评价模型。进而对给定数量的故障星分布在单个或多个轨道面内的不同状况下,典型的Walker δ构型导航星座的PDOP可用性如何变化进行了仿真计算和比较分析。仿真结果表明,故障星分布状况和轨道平面数对星座PDOP可用性有较显著影响,适当地减少轨道平面数对于改善星座的PDOP可用性是有利的。提出的评价模型物理意义明确,避免了主观性和局限性,且可以保证较高的指标评价效率。     

大气紊流环境下的纵向飞行参数响应分析

介绍了大气紊流环境下飞机纵向飞行参数的计算与匹配方法.由于紊流的随机性特征,飞行参数响应分析采用时域与频域相结合的方式,对某型飞机紊流环境下的纵向飞行参数进行了计算分析.采用所介绍的方法,可以获得比较合理的飞行情况来指导型号设计工作.     

一类二阶三点边值问题解的存在性

运用上下解方法,研究了一类二阶混合非线性边值条件的三点边值问题,通过构造了适当的非线性辅助函数工得到了解存在的充分条件,推广和改进了某些已知的结果。     

涡扇发动机早期退化性能的线性变参数估计

针对涡扇发动机线性变参数(Linear parameter varying,LPV)模型,给出了一种新的早期退化航空发动机部件性能LPV滤波器设计方法.该方法采用仿射依赖于参数的二次Lyapunov函数,在仿射二次稳定性的基础上,引入多凸性引理将滤波器求解问题转化为线性矩阵不等式(Linear matrix inequalities,LMI)约束下的凸优化问题,避免了求解参数化线性矩阵不等式(Parameterized linear matrix inequalities,PLMI)约束下的优化问题.针对某型早期退化涡扇发动机的仿真表明,该方法能以较高精度估计性能退化参数,且鲁棒性强,增益调度简单,具有一定的工程意义.      

基于红外热像技术的涡轮叶片损伤评价研究进展

主动红外热像技术作为一种新型无损检测手段,具有高效率、无污染、易操作等特点,适合用于材料表面和近表面缺陷检测,因此在叶片类薄壁零件损伤评价方面有一定优势。当前基于主动红外热像无损检测技术的高温涡轮叶片损伤评价研究主要集中于热障涂层厚度检测、涂层脱粘检测、涂层界面处热生长氧化物检测以及叶片基体疲劳裂纹检测4个方面。但现有研究仍然面临热激励理论不完善、红外热像仪识别精度不够高以及热图处理方法有待改进等主要问题和困难。随着这些理论问题和技术困难的解决,主动红外热像技术呈现出人工识别缺陷向自动识别发展、定性检测向定量检测发展的趋势。总体而言,该技术未来在涡轮叶片损伤评价方面具有较大的应用潜力。     

基于模型的民机自动飞行功能分析与设计

描述了民用飞机自动飞行系统基于模型的功能分析与架构设计过程。该研究采用符合现代系统工程理念的模型化设计形式,表明和确认系统功能在各种运行决策、人机交互和外部环境中的变化。它针对系统级功能静态、动态特性进行结构化分析和设计,系统性地研究外部对象、应用用例、功能逻辑、交联时序和状态跳转,在确认模型的合理性后生成逻辑架构与接口,将设计需求进行分配,用于设计实现和软硬件架构。该研究通过对飞行导引、自动推力、自动着陆、机组通告等功能的可用性和完整性进行分析检验,改进了功能需求设计。     

对偶型最大熵概率密度函数模型及其优化解法

针对经典型最大熵概率密度函数模型及其计算目前存在的非线性程度高,优化不收敛,求解效率低等问题,提出了一种对偶型最大熵概率密度函数模型+逐次优化的方法.根据优化过程不稳定,重新推导了拉格朗日系数的线性变换公式.针对几种常见及一种复杂的概率密度函数,采用经典型与对偶型最大熵概率密度函数模型分别计算概率密度及可靠度的对比表明:与经典型最大熵概率密度函数模型相比,对偶型最大熵概率密度函数模型优化函数形式简单,非线性程度低.逐次优化法求解拉格朗日系数不仅克服了初始值敏感性问题,而且计算效率高.对偶型最大熵概率密度函数模型+逐次优化法与其他方法相比,计算精度最高,且能很好的应用于复杂概率分布及可靠性问题.      

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.