基于自适应模拟退火遗传算法的月球软着陆轨道优化

 将自适应遗传算法与模拟退火算法相结合,形成一种自适应模拟退火遗传算法。该算法不但具备了自适应遗传算法的强大全局搜索能力,也拥有模拟退火算法的强大局部搜索能力。针对月球软着陆轨道优化的特点,利用一种新的参数化方法将轨道优化问题转换为非线性规划问题,并应用提出的自适应模拟退火遗传算法进行优化。数值结果表明：该算法的收敛速度快,优化精度高,且避免了初值敏感、病态梯度和局部收敛等问题,能够搜索到全局最优轨道。     

基于传递函数方法的局部覆盖环状CLD圆柱壳动力学分析

 采用传递函数方法对局部覆盖环状约束层阻尼（CLD）圆柱壳进行了动力学分析。基于Donnell薄壳简化,由Hamilton原理导出了局部覆盖CLD圆柱壳的运动方程和边界条件,通过Laplace变换并引入状态向量后,建立了系统的状态空间方程,利用传递函数方法求解方程得到了系统的固有频率、〖JP2〗损耗因子和频响曲线。算例分析结果验证了该方法的有效性和精确性,且更适于处理黏弹性材料具有频变特性的问题。讨论了CLD覆盖率和黏弹层厚度对系统固有频率和损耗因子的影响,为局部覆盖CLD圆柱壳的优化设计奠定了基础。     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

Revisiting the space-time gradient method: A time-clocking perspective,high order difference time discretization and comparison with the harmonic balance method

This paper revisits the Space-Time Gradient(STG) method which was developed for efficient analysis of unsteady flows due to rotor–stator interaction and presents the method from an alternative time-clocking perspective. The STG method requires reordering of blade passages according to their relative clocking positions with respect to blades of an adjacent blade row. As the space-clocking is linked to an equivalent time-clocking, the passage reordering can be performed according to the alternativ...     

A spanwise loss model for axial compressor stator based on machine learning

In the early stage of aircraft engine design, the through-flow method is an important tool for designers. The accuracy of the through-flow method depends heavily on the accuracy of the loss model. However, most existing models cannot(or cannot well) provide the spanwise loss distribution. To construct an effective spanwise loss model, both turbomachinery knowledge and machine learning skills were used in this paper. A large number of numerical simulations were carried out to build a database con...     

捕风一号卫星总体设计与技术特点

捕风一号卫星是中国首次实现基于星载导航卫星反射信号测量(global navigation satellite system-reflection,GNSS-R)技术的气象卫星,采用新型L波段海面风场信息探测技术,在风场测量、海面飓风风速反演等方面为国家气象、防灾减灾等行业提供服务.从系统设计角度介绍了捕风一号卫星的总...     

二阶时间精度的CFD/CSD耦合算法研究

非线性气动弹性分析中,涉及到非线性流体动力学(CFD)和非线性结构动力学(CSD)的耦合计算问题。本文分析比较了目前几种耦合算法:全耦合、松耦合和紧耦合,并从耦合边界能量传递守恒上就松耦合及紧耦合方法进行了时间精度的分析,得出传统松耦合中即使流体和结构子系统达到高阶时间精度,耦合算法的时间精度仍仅为一阶,紧耦合方法虽然可以达到二阶时间精度,但没有明显提高计算效率。随后,本文基于松耦合流程改进了耦合格式,分析表明其具有二阶时间精度,通过AGARD445.6机翼颤振模型的算例验证,说明该方法可以在保证计算精度的基础上明显提高计算效率,并保持了传统松耦合方法模块化的优点,在模拟非线性气动弹性问题时具有很高的优越性。     

适于直升机配平计算的混合遗传算法

结合传统的数值计算如拟牛顿法的局部快速收敛特性,以及遗传算法的全局收敛与群体搜索的优点,发展出一种新的混合遗传算法,使之具备全局快速收敛特性。通过两个算例及某型直升机在前进比为0.2状态下的配平,验证了该算法的可行性及高效性,从而为直升机的配平计算提供了一种新的成功的算法,同时也在传统数值分析方法和现代智能进化算法之间的有效结合做了一次比较成功的尝试。     

翼尖装置优化设计研究

使用面元法气动分析软件VSAERO对机翼与翼梢小翼组合体模型进行数值模拟,并采用Steve Smith提出的诱导阻力优化方法对翼梢小翼的定位进行优化设计。结果表明,能够有效地预测出翼梢小翼的最优定位,在翼梢小翼优化设计中具有很好的适用性。