挤压工艺对镁合金组织性能的影响

介绍了ＭＢ１５镁合金棒材和型材的挤压成形工艺，以及不同挤压成形工艺生产的棒材，型材的组织及性能情况。论述了一次和二次压成形工艺对镁合金棒材和型材的组织、性能的影响。     

碳纤维作宿主的FeCl3-GIC的合成与结构表征

采用混合熔融盐法成功地合成了以PAN基高模量碳纤维作宿主，FeCl3作插层剂的石墨层间化合物，采用XRD技术对其层间结构进行了表征。结果表明，所得产物内部已经形成混阶的阶结构。通过SEM和TEM观察了其形貌和结构的变化，同时利用EDS测定了各元素的相对含量。     

环境专业教学体系结构改革探索——以就业市场需求为导向

通过对西安航专2006与2007年环境监测与治理技术专业毕业生就业情况的对比分析，认为目前环境类专业的就业形势发生良性转变，需求范围增加，同时就业单位对毕业生的专业技术能力、技术管理能力等也提出了更高的要求。据此，我们从专业发展方向、课程体系结构以及实验实训三个方面进行建设与调整来满足就业单位的需求。     

Observations of loops and prominences

We review recent observations by the Yohkoh-SXT in collaboration with other spacecraft and ground-based observatories of coronal loops and prominences. These new results point to problems that SoHO will be able to address. With a unique combination of rapid-cadence digital imaging (32 s full-disk and 2 s partial-frame images), high spatial resolution (2.5 arcsec pixels), high sensitivity (EM 10⁴² cm^–3), a low-scatter mirror, and large dynamic range, SXT can observe a vast range of targets on the Sun. Over the first 21 months of Yohkoh operations, SXT has taken over one million images of the corona and so is building up an invaluable long-term database on the large-scale corona and loop geometry. The most striking thing about the SXT images is the range of loop sizes and shapes. The active regions are a bright tangle of magnetic field lines, surrounded by a network of large-scale quiet-Sun loops stretching over distances in excess of 10⁵ km. The cross-section of most loops seems to be constant. Loops displaying significant increase in the ratio of the footpoint to loop-top diameter () are the exception, not the rule, implying the presence of widespread currents in the corona.All magnetic structures show changes. Time scales range from seconds to months. The question of how these structures are formed, become filled with hot plasma, and are maintained is still open. While we see the propagation of brightenings along the length of active-region loops and in X-ray jets with velocities of several hundred km/s, much higher velocities are seen in the quiet Sun. In XBP flares, for example, velocities of over 1000 km/s are common. Active-region loops seem to be in constant motion, moving slowly outward, carrying plasma with them. During flares, loops often produce localized brightenings at the base and later at the apex of the loop. Quiescent filaments and prominences have been observed regularly. Their coronal manifestation seems to be an extended arcade of loops overlying the filament. Reliable alignment of the ground-based data with the X-ray images make it possible to make a detailed intercomparison of the hot and cold plasma structures over extended periods. Hence we are able to follow the long-term evolution of these structures and see how they become destabilized and erupt.     

一种新颖的瞬时浮点放大器

介绍了瞬时浮点放大器的原理及构成，并给出一种结构新的具有２５６阶的瞬时浮点放大器，可有效地提高数据采集系统的测量范围。     

空间相机中与大口径透镜有关的结构设计分析

某空间相机镜头在光学设计时,因透过率、吸收率等原因,为了满足光学系统要求,经过各方面平衡后,其中有一片透镜比正常径厚比设计的偏薄些。在镜头总体结构设计时,单独对该镜片及与之相配的结构件进行了有限元分析和实验检测,发现不同的结构形式对镜片面形影响不同。为了解决这一问题,在实验中进行了探讨,以保证整个相机系统满足空间相机的实用要求。     

宽频带带状线魔T的一种新颖的分析与设计方法

介绍了一种宽频带带状线魔T的设计原理,并采用了一种新颖的设计方法,即利用Ansoft公司的电磁场高频结构仿真软件HFSS对所设计的器件进行分析。所设计的魔T带宽可达一个倍频程以上,在设计频段(1GHz~2GHz)内,移相偏差Δ<±5°,幅度不平衡ΔA<1dB,回波损耗小于-19dB,端口隔离度小于-20dB。     

导流锥结构参数对燃气弹射筒内压力冲击平滑效果影响研究

针对导流锥结构参数对内弹道流场耦合影响问题,基于动态分层动网格技术,构建了含导弹运动和二次燃烧的内弹道数值模型,并验证了模型可靠性。解耦分析了导流锥半径、高度及冲击高度对内弹道流场特性和载荷的影响。结果表明：导流锥的结构直接决定燃气飞溅现象的产生和流场结构的紊乱程度,导流锥的半径、高度和冲击高度的改变会对燃气反射点的位置、二次燃烧的区域以及剧烈程度产生影响;结构优化后的导流锥,较大程度地缓解了冲击现象,获得了较好的平滑效果,筒底压力较实验装置降低了24.5%。     

激光微推进的靶特性研究进展

2003年,首款激光等离子体微推力器(micro-Laser Plasma Thruster,μLPT)应用于美国空军微小卫星姿态轨道控制,激光微推进技术越来越受到业内人士的广泛关注。总结了激光微推进的五种工作模式,并进行了简要分析,重点关注了激光微推进技术发展过程中的靶特性研究现状,介绍了靶材物态和靶材结构两个方面的推进性能研究进展,并对其进行了分析,对激光微推进技术的进一步发展形成了一些认识和建议。     

石墨纤维/改性氰酸酯复合材料的应用研究

采用环氧树脂对4,4-二氰酸酯基二苯基丙烷(BADCy)进行共聚改性,通过DSC分析,确定了固化工艺参数,并与石墨纤维(UHMCF)复合制成单向板,测试了不同后处理温度制得的单向板力学性能,并与现用UHMCF/树脂基复合材料单向板的力学性能进行了比较,测试了UHMCF/改性氰酸酯的空间环境性能;制备了UHMCF/改性氰酸酯结构件,测试其性能,并与现用UHMCF/树脂基复合材料同类结构件的性能进行了比较。结果表明:UHMCF/改性氰酸酯不论是单向板还是结构件的性能均优于现用UHMCF/树脂基复合材料的性能,且满足空间环境对航天器结构材料性能的要求。