三维弹道有理Bezier曲线造型与优化方法

为有效克服传统弹道优化方法解的收敛性和最优性受搜索算法、初始猜测等影响大的问题,提出了基于有理Bezier曲线的三维弹道造型与优化计算方法。根据边界条件用光滑且只含少量造型变量的有理Bezier曲线形成待优化三维造型弹道,采用逆动力学方法计算造型弹道倾角、弹道角速度和法向加速度等,结合弹道其它动力学方程和约束计算造型弹道性能指标,通过对弹道造型变量寻优得到最优弹道。这种方法将无限维弹道优化问题转换为对很少造型变量的参数优化问题, 而且得到的最优弹道完全光滑可飞。与间接法相比,无需求解两点边值问题使用方便、鲁棒性强;与直接法相比,不需要对动力学方程离散化、寻优变量少、求解收敛性好,而且解的全局最优性和光滑性更高。仿真结果及与自适应伪谱法的比较校验了方法的实用性和有效性。     

采用改进非支配近邻免疫算法的低轨混合星座设计优化

针对低轨同构星座覆盖资源在纬度上分布不均匀的不足,提出采用低轨混合星座提升覆盖均匀性的设计方案,并推导了满足全球任意点平均每天覆盖一定次数的最小卫星规模估算公式。针对非支配近邻免疫算法（NNIA）约束处理方面的不足,提出基于约束支配的改进非支配近邻免疫算法（Modified NNIA）,并以此设计了一种低轨混合星座优化平台来优化带约束的星座设计问题。仿真结果表明,改进的NNIA算法在收敛速度和多样性上均优于非支配分层遗传算法（NSGA II）和多目标粒子群算法（MOPSO）,可大大提高星座设计的效率。同时优化结果也表明低轨混合星座可提高覆盖的均匀性和大部分区域的覆盖次数,进而减少特定覆盖要求所需的卫星数目。     

多目标融合的冗余空间机械臂碰前轨迹优化

面向在轨对接与装配任务,提出了多目标融合的冗余度空间机械臂碰前轨迹优化方法。通过分析任务特点,阐述了空间机械臂碰前的多重任务目标。针对由空间机械臂连续轨迹跟踪、碰撞姿态控制及碰撞冲量幅值优化三个目标组成的第一类任务,通过设置任务优先级融合多目标并采用基于主任务零空间的方法实现对碰前轨迹的优化;而对由空间机械臂点到点规划、碰撞姿态控制及碰撞冲量幅值优化三个目标组成的第二类任务,通过设置任务权重将多目标融合并采用遗传算法对碰前轨迹进行优化。以典型七自由度机械臂为例开展仿真实验,验证了提出的轨迹优化方法的有效性。     

改善返回舱气动稳定特性数值计算研究

和第一宇宙速度载人再入飞行相比,以第二宇宙速度载人再入飞行对返回器的升阻比要求较高。文章给出了一种升阻比能够满足第二宇宙速度再入需求的返回器基本外形,分析了基本外形的气动性能以及质心位置对气动稳定特性的影响,结果表明基本外形在高超声速和亚声速下均存在第二静稳定配平点的问题。为了改善基本外形的气动稳定特性,文章提出了多种改进外形设计,包括增加稳定耳片、改变尾部外形设计等。通过数值模拟对这些改进外形的气动稳定性进行了分析,结果表明这些改进设计对于改善返回器的单点稳定特性是有效的。通过对流场特性的详细分析,对改进气动设计改善返回器稳定特性的机理进行了揭示和阐释。     

Solving Job-Shop Scheduling Problem Based on Improved Adaptive Particle Swarm Optimization Algorithm

An improved adaptive particle swarm optimization(IAPSO)algorithm is presented for solving the minimum makespan problem of job shop scheduling problem(JSP).Inspired by hormone modulation mechanism,an adaptive hormonal factor(HF),composed of an adaptive local hormonal factor(H l)and an adaptive global hormonal factor(H g),is devised to strengthen the information connection between particles.Using HF,each particle of the swarm can adjust its position self-adaptively to avoid premature phenomena and reach better solution.The computational results validate the effectiveness and stability of the proposed IAPSO,which can not only find optimal or close-to-optimal solutions but also obtain both better and more stability results than the existing particle swarm optimization(PSO)algorithms.     

Simple method for performance evaluation of multistage rockets

Multistage rockets are commonly employed to place spacecraft and satellites in their operational orbits. Performance evaluation of multistage rockets is aimed at defining the maximum payload mass at orbit injection, for specified structural, propulsive, and aerodynamic data of the launch vehicle. This work proposes a simple method for a fast performance evaluation of multistage rockets. The technique at hand is based on three steps: (i) the flight-path angle at each stage separation is guessed, (ii) the spacecraft velocity is maximized at the first and second stage separation, and (iii) for the last stage the thrust direction is obtained through the particle swarm optimization technique, in conjunction with the use of the Euler–Lagrange equations and the Pontryagin minimum principle. The coast duration at the second stage separation is optimized as well. The method at hand is extremely simple and easy-to-implement, but nevertheless it proves to be capable of yielding near-optimal ascending trajectories for a multistage launch vehicle with realistic structural, propulsive, and aerodynamic characteristics. The solutions found with the technique under consideration can be employed either for a rapid evaluation of the multistage rocket performance or as guesses for more refined optimization algorithms.     

Optimal nodal flyby with near-Earth asteroids using electric sail

The aim of this paper is to quantify the performance of an Electric Solar Wind Sail for accomplishing flyby missions toward one of the two orbital nodes of a near-Earth asteroid. Assuming a simplified, two-dimensional mission scenario, a preliminary mission analysis has been conducted involving the whole known population of those asteroids at the beginning of the 2013 year. The analysis of each mission scenario has been performed within an optimal framework, by calculating the minimum-time trajectory required to reach each orbital node of the target asteroid. A considerable amount of simulation data have been collected, using the spacecraft characteristic acceleration as a parameter to quantify the Electric Solar Wind Sail propulsive performance. The minimum time trajectory exhibits a different structure, which may or may not include a solar wind assist maneuver, depending both on the Sun-node distance and the value of the spacecraft characteristic acceleration. Simulations show that over 60% of near-Earth asteroids can be reached with a total mission time less than 100 days, whereas the entire population can be reached in less than 10 months with a spacecraft characteristic acceleration of 1 mm/s².     

双后掠鸭翼气动特性的数值模拟

首先针对具有中等前缘后掠角梯形鸭翼的缺点提出双后掠鸭翼概念,然后分别对安装梯形鸭翼和双后掠鸭翼的近距耦合鸭式布局的气动性能进行数值模拟研究,分析影响双后掠鸭翼气动性能的流动机理。研究表明：在大迎角时,对于双后掠鸭翼,具有较大前缘后掠角的外翼段可以使鸭翼涡在涡核破裂后仍能形成稳定集中涡并保持较高的强度,增加鸭翼本身的失速迎角,并通过诱导作用改善机翼外翼段流场,进而提高全机大迎角性能,但在小迎角时会破坏鸭翼附着流或前缘气泡涡的发展,造成略微的升力损失。拥有较大失速迎角的双后掠鸭翼在小迎角时具有较大的可用偏度,可以增强布局的抬头控制能力。双后掠鸭翼在满足隐身约束的前提下,超声速阻力较小,具有较好的超声速性能。     

可应用于民机空气动力设计中的数值优化方法

目前民机成功设计的一个关键要素即在设计中有效地引入计算流体力学（CFD）的模拟方法和软件,特别是具有设计能力的方法和工具。本文概要地叙述了反设计、基于CFD低可信度和高可信度模型等数值优化方法的发展和应用于民机设计的历史和现状;简单地介绍了即将举行的空气动力优化设计计算系列研讨会;重点讨论了对可应用于民机设计的基于Navier-Stokes方程解算器的OPTIMAS的数值优化方法的要求及其构造方法,并以翼身组合体整流外形和翼身融合体（BWB）外形的算例表明其有效性,说明OPTIMAS可以成为民机日常设计的方法和工具之一。     

Rapid design and optimization of low-thrust rendezvous/interception trajectory for asteroid deflection missions

Asteroid deflection techniques are essential in order to protect the Earth from catastrophic impacts by hazardous asteroids. Rapid design and optimization of low-thrust rendezvous/interception trajectories is considered as one of the key technologies to successfully deflect potentially hazardous asteroids. In this paper, we address a general framework for the rapid design and optimization of low-thrust rendezvous/interception trajectories for future asteroid deflection missions. The design and optimization process includes three closely associated steps. Firstly, shape-based approaches and genetic algorithm (GA) are adopted to perform preliminary design, which provides a reasonable initial guess for subsequent accurate optimization. Secondly, Radau pseudospectral method is utilized to transcribe the low-thrust trajectory optimization problem into a discrete nonlinear programming (NLP) problem. Finally, sequential quadratic programming (SQP) is used to efficiently solve the nonlinear programming problem and obtain the optimal low-thrust rendezvous/interception trajectories. The rapid design and optimization algorithms developed in this paper are validated by three simulation cases with different performance indexes and boundary constraints.