基于T-S模糊系统的空天飞行器鲁棒自适应轨迹线性化控制

 基于T-S模糊系统提出了鲁棒自适应轨迹线性化控制(RATLC)方法。利用T-S模糊系统逼近未知干扰和不确定性因素,并采用Lyapunov方法设计了鲁棒自适应控制律。不论系统状态的维数和用于逼近不确定的模糊系统规则数为多少,整个系统仅有两个参数在线调整。理论分析证明了闭环系统所有信号一致最终有界。应用提出的控制方案设计了空天飞行器(ASV)飞行控制系统,并在高超声速飞行条件下进行了仿真验证,仿真结果表明了控制方案的有效性和鲁棒性。     

BL分析下的管制员差错本体建模研究

为分析识别空中交通管制任务中管制差错问题,结合BL(body loop,BL)压力产生模型研究管制员压力来源.提出领域本体的建模流程,确立推理模型的内部逻辑关系,构建管制差错领域本体模型.采用FaCT++推理机针对实际案例进行语义推理,从而识别管制差错类型,提出了基于本体的管制差错专家系统的系统框架.结果验证了构建推理模型的有效性和合理性.     

Robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft with actuator saturation

This paper is concerned with the robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft under system uncertainty, mismatched disturbance, and actuator saturation. For the proposed aircraft, comprehensive controllability analysis is performed to evaluate the controllability of each state as well as the margin to reject mismatched disturbance without any knowledge of the controller. Mismatched disturbance attenuation is ensured through a structured H-infinity controller tuned by a non-smooth optimization algorithm. Embedded with the H-infinity controller, an adaptive control law is proposed in order to mitigate matched system uncertainty and actuator fault. Input saturation is also considered by the modified reference model. Numerical simulation of the novel ducted fan aircraft is provided to illustrate the effectiveness of the proposed method. The simulation results reveal that the proposed adaptive controller achieves better transient response and more robust performance than classic Model Reference Adaptive Control (MRAC) method, even with serious actuator saturation.     

A multi-aircraft conflict detection and resolution method for 4-dimensional trajectory-based operation

Conflict Detection and Resolution(CDR) is the key to ensure aviation safety based on Trajectory Prediction(TP). Uncertainties that affect aircraft motions cause difficulty in an accurate prediction of the trajectory, especially in the context of four-dimensional(4D) Trajectory-Based Operation(4DTBO), which brings the uncertainty of pilot intent. This study draws on the idea of time geography, and turns the research focus of CDR from TP to an analysis of the aircraft reachable space constrained by 4D waypoint constraints. The concepts of space–time reachability of aircraft and space–time potential conflict space are proposed. A novel pre-CDR scheme for multiple aircraft is established. A key advantage of the scheme is that the uncertainty of pilot intent is accounted for via a Space-Time Prism(STP) for aircraft. Conflict detection is performed by verifying whether the STPs of aircraft intersect or not, and conflict resolution is performed by planning a conflict-free space–time trajectory avoiding intersection. Numerical examples are presented to validate the efficiency of the proposed scheme.     

Envelope protection for aircraft encountering upset condition based on dynamic envelope enlargement

Upset condition encountered by an aircraft in flight could pose great threat to flight safety, which is of chief importance in civil aviation. The causal factors have the nonlinear and multiple characteristics, and as a result the conventional envelope protection system cannot successfully do with the condition. So dynamic envelope based on differential manifold theory, which can take more coupling factors into account, is proposed as a basis to design a novel envelope protection system. Then the relationship between the dynamic envelope and the control coefficient or pilot command is obtained, and the result shows that the dynamic envelope can be enlarged with the change of control coefficient. Furthermore, quantification of flight security is realized via defining relative distance between flight state and dynamic envelope, which can detect whether there is a risk for an aircraft in flight. Finally, an envelope protection system based on dynamic envelope enlargement is proposed on the basis. NASA’s Generic Transport Model encountering hazard gust wind in climbing phase is taken as an example to verify the system’s feasibility. The result shows that the system can give a better operation encountering upset condition and to a certain extent reduce the number of accidents or incidents.     

Transonic buffet control research with two types of shock control bump based on RAE2822 airfoil

Current research shows that the traditional shock control bump (SCB) can weaken the intensity of shock and better the transonic buffet performance.The author finds that when SCB is placed downstream of the shock,it can decrease the adverse pressure gradient.This may prevent the shock foot separation bubble to merge with the trailing edge separation and finally improve the buffet performance.Based on RAE2822 airfoil,two types of SCB are designed according to the two different mechanisms.By using Reynolds-averaged Navier-Stokes (RANS) and unsteady Reynolds-averaged Navier-Stokes (URANS) methods to analyze the properties of RAE2822 airfoil with and without SCB,the results show that the downstream SCB can better the buffet performance under a wide range of freestream Mach number and the steady aerodynamics characteristic is similar to that of RAE2822 airfoil.The traditional SCB can only weaken the intensity of the shock under the design condition.Under the off-design conditions,the SCB does not do much to or even worsen the buffet performance.Indeed,the use of backward bump can flatten the leeward side of the airfoil,and this is similar to the mechanism that supercritical airfoil can weaken the recompression of shock wave.     

仿真技术在航空推进控制系统中的应用

设计了基于3个层次的航空推进控制系统闭环仿真试验方案,重点阐述了基于试验台的半物理仿真的关键技术。     

飞机稳定尾旋的改出规律研究

研究稳定尾旋的改出方法,即寻求一种操纵规律,可以使飞机从一种稳定状态（稳定尾旋）跳到另一处非失速稳定状态。从系统的全局稳定性观点出发,构造了李雅普诺夫函数,根据输入操纵第一时刻该函数增长速度最大条件,保证尾旋改出过程中飞机振荡状态的频率接近其固有频率,从而救是飞机稳定尾旋的改出规律－－振荡型改了操纵规律。本文静放求解飞机运动的六自由度的方法计算出尾旋改出的时间历程,验证了用简单的三舵面回中难改出稳     

增强FMS柔性的关键技术研究

柔性制造技术是现代制造业广泛采用的一种先进的制造技术。实现生产柔性是引进柔性制造技术的根本目的。ＦＭＳ是柔性制造技术应用的典型模式。     

MDS图在液态模锻工艺过程单片机仿真控制系统中的应用

本文介绍了液态模锻工艺过程单片机仿真控制系统的设计方法,包括液态模锻工艺程确立、逻辑量确立、硬件系统设计、ＭＤＳ图的建立及软件实现,在工艺设备的逻辑性控制中应用ＭＤＳ图控制结构设计的控制器可方便方便地实现ＰＬＣ的控制功能,也可主便地实现其他娄字逻辑系统的控制功能。