排序方式: 共有49条查询结果,搜索用时 15 毫秒
21.
本文介绍了一种基于光纤双环网的时频同步技术设计方法,针对时频设备协同使用时如何获得高精度同步指标这一问题提出了一种设计思路。以系统时间源使用北斗/GPS/GLONASS,本系统同步精度优于5E-13,频率稳定度优于5E-13@1d;以UTC(BIRMM)输出的TOD+1PPS做系统时间源,本系统同步精度优于4E-13,频率稳定度优于6E-14@1d。本方案提出的方法原理简单,系统可根据使用情况进行裁剪,相比卫星双向等手段成本低廉,适合在时频同步领域推广。 相似文献
22.
《中国航空学报》2021,34(9):247-260
As Ti-6Al-4V is a typical hard to machine material, especially in micro drilling aviation parts, chip breaking difficulty is of increasing interest to explore its further development. In this study, Longitudinal-Torsional Ultrasonic Assisted Drilling (LTUAD) was employed to machine Ti-6Al-4V, and its feasibility was evaluated by comparing with Conventional Drilling (CD). By combining periodical characteristics and vibration models (the separated or the unseparated ultrasonic elliptical vibration), the influence of ultrasonic frequency on the intersection characteristics of trajectories were analyzed. And the intersection characteristics were divided into four categories: even periodicity, odd periodicity, non-odd and even periodicity and composite periodicity, indicating different capability for chip breaking. By applying the longitudinal-torsional compound vibration horn, the micro-hole drilling experiment was carried out on machining center. The chip morphology, the thrust force, and the burr height were discussed. Experimental results showed that the morphology of chips presented as smaller and more fragmentary ones in LTUAD compared with continuous helical conical ones and fold-shaped ones in CD. Compared with CD, the average values of the thrust force in LTUAD reduced by 1.98% to 24.9%. According to the burr around the hole exit in both LTUAD and CD, the height of the latter was greatly affected by the drilling parameters. And the burr around the exit of the hole were distributed rather evenly with smaller extension in LTUAD. Consequently, the LTUAD employed in micro-hole drilling was effective. 相似文献
23.
管制员工作负荷评估的回归分析法 总被引:1,自引:0,他引:1
空中交通管制员是保证空中交通安全和高效的最重要的因素,管制员工作负荷的合理评估对保障空中交通系统安全运转具有重要作用。本文采用回归分析法并以特定空域为例,介绍了管制员工作负荷评估方法、原始数据处理方式、参数提取和工作负荷评估模型形成。通过评估模型在实例中的应用,说明了管制员工作负荷评估的回归分析法在空域容量评估上的可行性和正确性。 相似文献
24.
25.
26.
粉尘爆炸与爆炸危险度评价 总被引:1,自引:0,他引:1
蒋耀庭 《海军航空工程学院学报》2005,20(6):693-696
分析了粉尘爆炸的分类、条件、特性、因素、爆炸极限和最小点火能,重点介绍了粉尘爆炸的机理。在此基础上,采用Fuzzy评价的方法,建立了发生粉尘爆炸的危险度评价模型。 相似文献
27.
为了评估带气膜冷却涡轮叶顶间隙的密封和冷却综合特性,在强化传热综合因子中引入气膜冷却效率,推导出了密封冷却综合因子表达式.其物理含义为:主流在一定功率作用并喷入一定量冷气时,被评估的传热方式与基准传热方式传热性能比.数值模拟获得了动叶顶部隔板迷宫间隙气膜冷却和密封特性数据,利用该因子对密封冷却综合特性进行了评估.结果表明:在研究的吹风比内,迷宫结构的冷却效果相比于平叶顶间隙有所改进,随着吹风比减小,改进程度先增加后减小;密封效果只有在高吹风比时有所改进.密封冷却综合特性都得到了改进,吹风比越小,密封冷却综合特性越好. 相似文献
28.
29.
30.
为有效地对C4IKSR系统的效能进行评估,建立了C4IKSR系统效能评估指标体系。用粗糙集约简的思想减少了系统巾冗余的属性,获得了规则和可变精度的下近似集。提出了一种基于D—S证据理论的C4IKSR系统效能评估模型,利用可变精度的下近似集的计算结果给出基本概率赋值,进行了多信息表的数据融合。结果表明能够对C4IKSR系统效能进行有效地评估。 相似文献