Analysis of BDS-3 distributed autonomous navigation based on BeiDou system simulation platform

Satellite autonomous navigation is an important function of the BeiDou-3 navigation System (BDS-3). Satellite autonomous navigation means that the navigation satellite uses long-term forecast ephemeris and Inter-Satellite Link (ISL) measurements to determinate its own spatial position and time reference without the support of the ground Operation and Control System (OCS) for a long time to ensure that the navigation system can normally maintain the time and space reference. This paper aims to analyze the feasibility of distributed autonomous navigation algorithms. For the first time, a ground parallel autonomous navigation test system (GPANTS) is built. The performance of distributed autonomous navigation is then analyzed using the two-way ISL ranging of BDS-3 satellites. First, the BDS simulation platform and the GPANTS are introduced. Then, the basic principles of distributed satellite autonomous orbit determination and time synchronization based on ISL measurements are summarized. Preliminary evaluation of the performance of the BDS-3 constellation autonomous navigation service under ideal conditions through simulation data. Then the performance of autonomous navigation for 22 BeiDou-3 satellites using ISL measurements is evaluated. The results show that when satellites operate autonomously for 50 days without the support of any ground station, the User Range Error (URE) of autonomous orbit determination is better than 3 m, and the time synchronization accuracy is better than 4 ns.     

Analysis of electron content variations over Japan during solar minimum: Observations and modeling

Comparative analysis of GPS TEC data and FORMOSAT-3/COSMIC radio occultation measurements was carried out for Japan region during period of the extremely prolonged solar minimum of cycle 23/24. COSMIC data for different seasons corresponded to equinox and solstices of the years 2007–2009 were analyzed. All selected electron density profiles were integrated up to the height of 700 km (altitude of COSMIC satellites), the monthly median estimates of Ionospheric Electron Content (IEC) were retrieved with use of spherical harmonics expansion. Monthly medians of TEC values were calculated from diurnal variations of GPS TEC estimates during considered month. Joint analysis of GPS TEC and COSMIC data allows us to extract and estimate electron content corresponded to the ionosphere (its bottom and topside parts) and the plasmasphere (h > 700 km) for different seasons of 2007–2009. Percentage contribution of ECpl to GPS TEC indicates the clear dependence from the time and varies from a minimum of about 25–50% during day-time to the value of 50–75% at night-time. Contribution of both bottom-side and topside IEC has minimal values during winter season in compare with summer season (for both day- and night-time). On average bottom-side IEC contributes about 5–10% of GPS TEC during night and about 20–27% during day-time. Topside IEC contributes about 15–20% of GPS TEC during night and about 35–40% during day-time. The obtained results were compared with TEC, IEC and ECpl estimates retrieved by Standard Plasmasphere–Ionosphere Model that has the plasmasphere extension up to 20,000 km (GPS orbit).     

B737NG飞机反推系统故障分析

根据波音的相关技术文件,B737NG反推系统的部件有些本身带有设计缺陷或可靠性较低,导致反推系统故障较多。对反推系统的工作原理、常见故障及处理方法进行总结,使排故人员和故障管控工程师对该系统有深入的了解,方便大家开阔思路,减少排故的时间,提高排故效率。     

基于拆卸及扩展广义随机 Petri网的维修性仿真

在装备研制早期,难以有效地利用试验的方法进行维修性估计,此时适合采用仿真手段。对于机械系统拆卸路径的分析与优化,先基于赋时变迁Petri网建立拆卸Petri网模型,再利用A＊算法搜索最优拆卸路径,并确定拆卸时间。为了建立系统整个维修事件的过程模型,对广义随机Petri网进行了扩展,将其延时变迁与实际分布关联,对基于变迁的维修作业之间的逻辑关系进行了描述,并给出了基于蒙特卡罗法的维修时间仿真算法。最后,以对某火炮装备发射系统不击发故障的分析与排除为例,仿真计算了维修时间均值与方差,并对结果进行了分析。     

基于北斗三号导航系统的卫星定位技术

对北斗三号体制下的传输链路、接收门限进行理论分析,得出捕获算法采用4次非相干累加,可以使捕获灵敏度达到-130 dBm,同时实现定位时间小于5 min的综合较优结果.接着以低轨太阳同步轨道卫星为例,利用STK建模进行全轨道周期仿真,结果显示全程收星数超过4颗,定位精度达到2.59 m,速度误差为0.00378 m/s....     

Assessment of the suitability of public mobile data networks for aircraft telemetry and control purposes

This paper provides a review of the state of the art of relevant work on the use of public mobile data networks for aircraft telemetry and control proposes. Moreover, it describes the characterisation for airborne uses of the public mobile data communication systems known broadly as 3G. The motivation for this study was to explore how this mature public communication systems could be used for aviation purposes. An experimental system was fitted to a light aircraft to record communication latency, line speed, RF level, packet loss and cell tower identifier. Communications was established using internet protocols and connection was made to a local server. The aircraft was flown in both remote and populous areas at altitudes up to 8500 ft in a region located in South East Queensland, Australia. Results show that the average airborne RF levels are better than those on the ground by 21% and in the order of −77 dbm. Latencies were in the order of 500 ms (1/2 the latency of Iridium), an average download speed of 0.48 Mb/s, average uplink speed of 0.85 Mb/s, a packet of information loss of 6.5%. The maximum communication range was also observed to be 70 km from a single cell station. The paper also describes possible limitations and utility of using such communications architecture for both manned and unmanned aircraft systems.     

3D打印技术在水冷板加工中的应用研究

目前,3D打印技术在各行业得到了广泛的应用,探讨和研究3D打印技术在空空导弹中的应用具有重要的意义.简要介绍了3D打印技术概念、原理和材料,重点介绍了水冷板进行3D打印加工过程,打印成功的水冷板通过检验、加工、装配,满足结构设计要求.3D打印能够缩短水冷板加工周期,降低加工成本.     

基于80C31的手动测量装置CPM3板的 电路原理及故障处理

CPM3板是手动型测量机电控系统的核心部分，它具有一定的运动控制、采点计数以及自检功能。本文主要从调试和维修的角度探讨了CPM3板的电路设计原理，以及相应维修方法。     

不同应力水平下5A06 铝合金的疲劳断口研究

通过采用金相显微镜,扫描电镜和能谱分析研究了5A06铝合金高周疲劳断口的微观特征。研究结果表明:该合金在疲劳极限附近发生疲劳断裂时,裂纹主要萌生于杂质粒子与基体的界面结合处,较高应力水平下疲劳裂纹的萌生呈现多源性,并且裂纹主要起源于杂质粒子自身的开裂。随着应力水平的提高,裂纹的偏转路径更加复杂,疲劳辉纹间距不断增大,断口中疲劳裂纹扩展区所占比例减少。疲劳裂纹扩展的初期,疲劳微裂纹的偏转主要取决于相邻晶粒间有利滑移面的方向。     

Extrinsic calibration of a laser displacement sensor in a non-contact coordinate measuring machine

In order to implement 3D scanning of those complicated parts such as blades in the aviation field,a non-contact optical measuring system is established in the paper,which integrates a laser displacement sensor,a probe head,the frame of a coordinate measuring machine (CMM),etc.As the output of the laser sensor directly obtained possesses the 1D length of the laser beam,it needs to determine the unit direction vector of the laser beam denoted as (l,m,n) by calibration so as to convert the 1D values into 3D coordinates of target points.Therefore,an extrinsic calibration method based on a standard sphere is proposed to accomplish this task in the paper.During the calibration procedure,the laser sensor moves along with the motion of the CMM and gathers the required data on the spherical surface.Then,both the output of the laser sensor and the grating readings of the CMM are substituted into the constraint equation of the spherical surface,in which an over-determined nonlinear equation group containing unknown parameters is established.For the purpose of solving the equation group,a method based on non-linear least squares optimization is put forward.Finally,the system after calibration is utilized to measure the diameter of a metallic sphere 10 times from different orientations to verify the calibration accuracy.In the experiment,the errors between the measured results and the true values are all smaller than 0.03 mm,which manifests the validity and practicality of the extrinsic calibration method presented in the paper.