美国环境应力筛选标准MIL-HDBK-2164A解析

文章介绍了环境应力筛选现状和种类,重点对美国新版军用手册MIL-HDBK-2164A进行分析,指出该手册的最新观点。最后对军用产品环境应力筛选的标准修订及其实施提出建议。     

航天电子产品加速寿命试验技术研究

文章应用加速寿命试验理论和技术,对加速寿命试验的类型、参数模型以及加速方程的线性化等问题进行了分析,针对航天某电子产品的特点以及寿命分布假定,进行了加速寿命试验技术应用的研究,选择了以温度为应力的恒定应力加速寿命试验方案,并给出了应力水平,阐述了基于阿伦尼斯模型的加速寿命试验数据统计分析方法。     

企业产品决策信息支持平台实证研究

文章阐述DSS系统实现的一种方法，在理论分析的基础上，通过案例进行模拟，证明系统的实用价值。     

军品技改项目基准折现率确定方法研究

由于军品项目的特殊性，其基准折现率的确定方法与其他项目有所不同，要用以项目资金加权平均成本为基准，以项目整体风险系数为乘数来增加项目抗风险能力或作为投资风险补偿的基准折现率计算方法，其中，加权平均资金成本采用各种来源资金的资金成本的加权平均值（即全部资金的加权平均值），而在确定风险系数时则应结合军品技改的实际情况，充分考虑项目的风险因素，恰当地确定有关指标和权重。     

衍生金融工具对传统会计的冲击

衍生金融工具应运而生，但却无法在传统会计信息系统中反映，致使投资者在会计信息的占有与使用上严重不对称，无法作出最优决策。本文围绕衍生金融工具对传统会计要素、会计确认标准、会计计量基础以及会计报告的冲击，提出了基本的应对措施。     

整体壳段典型特征高效模块化编程技术

整体壳段为航天产品核心零部件，具有结构复杂、尺寸精度高、材料去除率大、工艺过程复杂、加工周期长等特点。在壳段数控加工过程中，存在编程难度大、重复工作量大、效率低及编程质量与编程人员能力水平密切相关等问题。为了适应高效、高可靠性的任务需求，依托成熟商用CAM软件，通过对整体壳段典型特征的分析，基于UG NX软件平台研究并开发了典型特征自动化编程模块，有效提高了加工程序的质量稳定性，并极大降低了工艺人员的编程操作量，提高了工艺设计效率。     

Full characterization of a compact 90Sr/90Y beta source for TID radiation testing

A new methodology for Total Ionizing Dose (TID) tests is proposed. It is based on the employment of an on-chip ⁹⁰Sr/⁹⁰Y beta source as alternative to standard methods such as ⁶⁰Co gamma rays and electrons from LINAC. The use of a compact beta source for TID tests has several advantages. In particular, the irradiation of devices with more than one radiation source results in a better representation of the complex space radiation environment composed of several types, energies and dose-rates. In addition, the use of an easy handling beta source allows the irradiation of electronic devices without any damage to other auxiliary circuit. In this work, ⁹⁰Sr/⁹⁰Y beta source dosimetry and related radiation field characteristics are discussed in depth.In order to validate the proposed source for TID tests, a rather complex device such as the “SPC56EL70L5” microcontroller from ST-Microelectronics was exposed to ⁹⁰Sr/⁹⁰Y beta rays. The results of this test were compared to that of a previous test of another sample from the same lot with a standard gamma ⁶⁰Co source. The electronic performances following the two irradiations have been found to be in excellent agreement, by demonstrating therefore the validity of the proposed beta source for TID tests.     

Thermal-optical design of a geodetic satellite for one millimeter accuracy

The LAGEOS (LAser GEOdynamic Satellite) satellites use a 1.5 in. uncoated retroreflector (cube corner). Design studies done for LAGEOS-1 showed that using smaller cubes would result in greater accuracy and lower thermal gradients. However, this would require using a larger number of cubes. Simulations showed that the accuracy goal of 5 mm could be met using 1.5 in. cubes by adding a dihedral angle offset. The LARES (LAser RElativity Satellite) satellite launched in 2012 is a smaller version of LAGEOS using the same size cube corner and floating mount as LAGEOS.The recent development of COTS (Commercial Off-The-Shelf) cube corners has eliminated cost as an obstacle to using a larger number of smaller cubes. COTS cubes have no dihedral angle offset. However, no offset is needed if the size is chosen properly. The diffraction pattern of a 1.0 in. uncoated cube with no dihedral angle offset has 6 lobes around the central peak due to total internal reflection, The velocity aberration for LAGEOS is about 32–40 microradians. The OCS (Optical Cross Section) of a one inch uncoated COTS retroreflector is about 0.5 million sq m for the LAGEOS orbit.Testing of 10 inexpensive COTS cubes by Ludwig Grunwaldt and Reinhart Neubert shows good cross section (unpublished work done at GFZ Potsdam, Germany). Measurement of 50 COTS cubes at INFN (Mondaini et al., 2018), shows a loss of cross section of only 33% (Slide 10). Simulations show that systematic range errors on the order of a half millimeter are possible for a spherical geodetic satellite such as LARES. Adjustments for the holding and ejection system result in some loss of accuracy.     

飞机构型控制技术初探

为了对现代飞机制造业中存在的复杂飞机构型进行有效地管理,解决产品数据管理中所遇到的构型控制难题,分析了现代飞机制造的特点以及对当今飞机制造业提出的问题,强调了构型控制技术的重要性.在明确了构型控制技术一些主要相关概念的基础上,借鉴波音公司实施构型控制技术的经验,针对中国飞机制造业的现状和未来发展,指出了飞机构型控制技术的4个关键内容,阐明了为实现飞机构型控制技术目前应开展的工作.     

固体推进剂定淬息距离凝相燃烧产物收集方法

含铝固体推进剂凝相燃烧产物对发动机的能量特性、热防护以及燃烧稳定性均有重要影响.为了排除燃烧过程中推进剂燃面退移造成的凝相燃烧产物淬息距离逐渐增大的影响,设计并建立了一套基于恒定淬息距离的凝相燃烧产物收集系统,并通过典型丁羟四组元推进剂凝相燃烧产物的收集和分析,对该收集方法进行了校验.结果表明,淬息距离恒定使得凝相燃烧...